Pearl white
●
Raspberry
●
Regal purple
●
Revolutionary blue
●
Silver
●
Before removing the display assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Optical drive (see
b.
WLAN module (see
c.
Memory module (see
d.
Keyboard (see
e.
Top cover (see
f.
Hard drive (see
g.
System board (see
Remove the display assembly:
1.
Remove the 5 Phillips PM2.5×6.5 screws (1) that secure the display assembly to
the base enclosure.
Battery on page
49), and then remove the following components:
Optical drive on page
WLAN module on page
Memory module on page
Keyboard on page
62)
Top cover on page
67)
Hard drive on page
71)
System board on page
734409-001
736816-001
734412-001
734411-001
734413-001
55)
53)
51)
80)
Component replacement procedures
99