Page 1
INSTRUCTIONS HD HARD DISK CAMCORDER GZ-HD3U Dear Customers Thank you for purchasing this hard disk camera. Before use, please read the safety information and precautions contained on pages 4 and 5 to ensure safe use of this product. For Future Reference: Enter the Model No.
Page 2
Record in High-Defi nition! Select the mode which suits your purpose ( • To record in higher quality video (XP mode) • To record a longer time (SP mode) • If you want to copy and edit the video as high-defi nition images by i.LINK output (1440 CBR mode) 8 To change the settings See page 66.
Page 3
Back Up High-Defi nition Images on DVD Discs! Video can easily be backed up on a DVD disc by connecting to a separate DVD burner (CU-VD40/CU-VD20). ( • This DVD disc can then be played in the camera or a PC, but not in a DVD player.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage"...
Page 5
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
You acknowledge that all copyrights and other intellectual property rights in the Program are owned by JVC and its licensor, and remain vested in JVC and such licensor. The Program is protected under the copyright law of Japan and other countries, and related Conventions.
Page 7
Should You breach any provision of this Agreement, JVC may terminate this Agreement without giving any notice to You. In this event, JVC may claim against You for any damages caused by Your breach. Should this Agreement be terminated, You must immediately destroy the...
Contents GETTING STARTED Accessories ... 10 Attaching/Detaching the Lens Hood ... 10 Attaching the Shoulder Strap ... 11 Preparing the Remote Control ... 11 Attaching the Core Filter to the Audio Cable ... 11 Index ... 12 Indications on LCD Monitor ... 14 Necessary Settings before Use ...
If the camera does not operate correctly, reset the camera. ( 8 Precautions on handling batteries • Be sure to use the JVC BN-VF815U/ VF823U battery packs. • If the camera is subjected to electrostatic discharge, turn the power off before using it again.
Accessories AC Adapter AP-V14U USB Cable pg. 46, 55, 64) Remote Control RM-V750U ( pg. 11) Attaching/Detaching the Lens Hood Battery Pack Component Cable BN-VF815U Lens Hood Shoulder Strap Already attached to the camera. below) Lithium Battery CR2025 Pre-installed in the remote control unit.
Attaching the Shoulder Strap Peel off the pad and thread the end of the strap through the eyelet. Eyelet Preparing the Remote Control A battery is included inside the remote control at the time of purchase. Remove the insulation sheet before use. Beam Effective Area Remote Sensor Effective distance:...
Index PLUG IN POWER NOTES • The LCD monitor can rotate 270°. • Power-linked operation You can also turn the camera on/off by opening/closing the LCD monitor during the recording mode. • Be careful not to cover sensors : and ; during shooting.
Page 13
Camera ! Index Button [INDEX] ( pg. 31)/ Remaining Space Button/Data Battery Button [ 0 / 1 ] ( pg. 18, 23) # Set Lever Move to ¡ : Reverse Skip ( pg. 29)/Up/ Backlight Compensation Button [BACK LIGHT] pg. 25) Move to ¢...
Indications on LCD Monitor During both Video and Still Image Recording 2 0 0 X F 5 . 6 1/4000 ! Selected Recording Mode Indicator pg. 24) # Tele Macro Mode Indicator ( $ Approximate Zoom Ratio ( % Inhibit Indicator &...
Necessary Settings before Use Access/Charge Lamp Set Lever Be sure to confi gure the following 3 settings before use. Charging the Battery Pack Set the power/mode switch to OFF. Slide while pressing down the lock button. (CHARGE) Attach the battery pack. Slide the battery pack down until it locks in place.
Language Setting The language on the display can be changed. Set the power/mode switch to ON. Slide while pressing down the lock button. VIDEO SCENE COUNTER MENU EXTERNAL MIC LEVEL QUALITY ZOOM SELECT VIDEO SCENE COUNTER EXTERNAL MIC LEVEL QUALITY ZOOM SELECT Select [GENERAL].
NOTES • If “COMMUNICATING ERROR” appears, there may be a problem with your battery. In such a case, consult your nearest JVC dealer. • The recordable time display should only be used as a guide. It is displayed in 10 minute units.
When Using an SD Card If you want to record to an SD card, the following 3 operations need to be performed. • Operations are certifi ed on the following SD cards. Video recording: Class 6 compatible SDHC card Still image recording: Panasonic, TOSHIBA, SanDisk, ATP (128 MB to 4 GB) or SDHC card (4 GB) •...
Recording Files Video Recording Preparation: Set the power/mode switch to ON. Slide the power/mode switch to MODE to select MODE lamp on the camera lights up. 8 To stop recording Press the REC button again. 8 To change the picture quality Change the settings in [QUALITY].
Still Image Recording Preparation: Set the power/mode switch to ON. Slide the power/mode switch to MODE to select mode. The switch returns MODE to the original position when it is released. lamp on the camera lights up. 8 To change the picture quality Change the settings in [QUALITY].
Recording Files Zoom Lever DIRECT BACKUP/ Set Lever EVENT LIGHT Zooming Preparation: • Slide the power/mode switch to MODE to select mode. • Press the PLAY/REC button to select recording mode. Zoom out W: Wide angle Maximum zoom ratio is 10X for videos, and 8X for still images (factory-preset).
Select the event that you want to register the fi le to. • To select a different destination, select [NEXT PAGE]. • To cancel the event registration, select [NON SECTION]. Select The selected event is displayed on the screen. Press the REC button to start recording. 8 To exit the screen Press the EVENT button.
Manual Recording PLAY/REC Button Set Lever FUNCTION FOCUS ASSIST Manual recording mode enables you to set the focus and screen brightness etc. manually. To Change to Manual Recording Mode Preparation: • Slide the power/mode switch to MODE to select mode. •...
Manual Focus After performing “To Change to Manual Recording Mode” ( pg. 24) Adjust the focus. 8 To cancel the manual focus setting Move the set lever to ¢ (FOCUS) so that the @/A indicator disappears. Focus Assist The image becomes black and white. The outline of focused object is displayed in blue.
Manual Recording Spot Exposure Control Use this function when backlight compensation does not work well, or to adjust the brightness in the desired spot. After performing “To Change to Manual Recording Mode” ( Move twice. Select the desired spot metering area frame.
Page 27
Menus [AUTO] : The brightness is adjusted automatically. –6 to +6 : Corrects the brightness within this range in increments [±0] : The brightness is not adjusted. ADJUST BRIGHTNESS –2.0 to +2.0 (EV) : Corrects the brightness within this range in Adjusts the brightness.
Page 28
Manual Recording Menus EFFECT Enables you to record videos or still images with special effects. TELE MACRO Enables you to shoot a subject as large as possible at a distance of approx. 70 cm (2.30 ft). ZEBRA* The sections of the photographic subject that are refl...
PLAYBACK Playing Back Files Video Playback Slide the power/mode switch to MODE to select The switch returns MODE to the original position when it is released. lamp on the camera lights up. 8 To return to the index screen Press the INDEX button. 8 To watch on TV See page 35.
Playing Back Files Still Image Playback Slide the power/mode switch to MODE to select mode. MODE lamp on the camera lights up. 8 To return to the index screen Press the INDEX button. 8 To watch on TV See page 35. 8 To turn the date display on/off Change the settings in [DATE/TIME].
Set Lever FUNCTION File Search Function You can switch the index screen to the date index screen or event screen for the convenient fi le search. The event screen can be used in cannot be used in mode. Date Index Screen You can search the desired fi...
Playing Back Files Select the recording date. To display all the fi les, select [ALL SCENES]. Select Select the fi le you want to play back. Select 8 To return to the index screen Press the INDEX button. 8 To change the event registration of a fi le See page 40.
Playback with Special Effects Playback effects Add effects that, for example, alter the color tones of images. Preparation: • Slide the power/mode switch to MODE to select mode. • Press the PLAY/REC button to select the playback mode. DELETE FUNCTION PROTECT EFFECT WIPE/FADER...
Page 34
Playing Back Files Wipe or fader effects – ! mode only Add effects at the beginning and end of videos. These effects cannot be set for still images. Preparation: • Slide the power/mode switch to MODE to select mode. • Press the PLAY/REC button to select playback mode.
Watching Images on TV This camera is designed to be used with high-defi nition or NTSC-type color television signals. It cannot be used with a television of a different standard. Connection with TV You can output videos from the HDMI connector, COMPONENT connector, or AV/S connector.
Watching Images on TV 8 To connect using the AV/S connectors S Connector To AC Outlet S Cable (optional) Connector S Input Connector NOTE Change the settings in [VIDEO/S OUTPUT] to suit the screen size of your television. pg. 70) (Continued) After the connection with TV is completed...
EDITING/PRINTING Managing Files Set Lever PLAY/REC Button Zoom Lever DIRECT AUTO/INFO FUNCTION BACKUP/ EVENT CAUTION Do not remove the recording medium or perform any other operation (such as turning off the power) while accessing fi les. Also, be sure to use the provided AC adapter, as the data on the recording medium may be corrupted if the battery becomes exhausted during operation.
Page 38
Managing Files Selecting and Deleting/Protecting Files After performing steps 1-2 ( Select [FILE SELECT]. Select Select the desired fi le. Select • (deletion) or appears on the fi le. To select other fi les, repeat this step. • If you slide the zoom lever towards T, the preview screen is displayed.
Viewing File Information Preparation: • mode: Pause the playback. Otherwise, select the fi le on the index screen. • mode: Play back the still image. Otherwise, select the fi le on the index screen. AUTO FILE FOLDER DATE/TIME PB TIME INFO QUALITY PROTECT...
Managing Files Changing the Event Registration of Video Files after Recording – mode only Preparation: • Slide the power/mode switch to MODE to select mode. • Press the PLAY/REC button to select playback mode. DIRECT BACKUP EVENT Select a new event to register the fi le to. •...
To Extract a Still Image File from a Video File – mode only You can extract the desired scene from a recorded video fi le, and store it as a still image fi le. Preparation: • Slide the power/mode switch to MODE to select mode.
Page 42
Managing Files Select the number of prints (max. 15 prints). Select To set print information for other images, repeat steps 4 and 5. (You can set up to 999 fi les.) FUNCTION 8 To exit the screen Press the FUNCTION button. 8 To cancel the selection Set the number of prints to “00”...
Playlists – ! mode only PLAY/REC Button Set Lever FUNCTION It is a list that enables you to organize recorded videos in order of preference. Preparation: • Slide the power/mode switch to MODE to select mode. • Press the PLAY/REC button to select playback mode.
Playlists – ! mode only (Continued) Select the insertion point. Select • To add other fi les, repeat steps 5 and 6. • To delete a registered scene, move the set lever to ¡ / ¢ to select the registered fi...
Other Operations of Playlists You can perform additional editing and delete fi les in a created playlist. Preparation: Perform steps 1-2. ( pg. 43) Adding/Deleting Files in Playlist Move the set lever to ¡ / ¢ to select [EDIT], then press down. Move the set lever to ¡...
Copying Files PLAY/REC Button Set Lever FUNCTION Types of Copying and Connectable Device The Camera You can copy still images between the HDD and SD card with this camera alone. ( DVD Burner (CU-VD40/CU-VD20) You can copy video/still image fi les recorded on this camera onto DVD discs.
Page 47
Backup All Files Preparation: • Connect the camera to the DVD burner. pg. 46) • Slide the power/mode switch to MODE to select mode. The following illustrations of display screens are examples of when backing up video fi les. Select [NORMAL BACK-UP]. Select NORMAL BACK-UP UNSAVED SCENES...
Page 48
Copying Files Select Files for Backup Preparation: • Connect the camera to the DVD burner. pg. 46) • Slide the power/mode switch to MODE to select mode. The following illustrations of display screens are examples of when backing up video fi les. Select [SELECT BACK-UP].
(optional) i.LINK Connector VCR/DVD Recorder NOTES • Be sure to use the optional JVC VC- VDV206U or VC-VDV204U i.LINK cable depending on the connector type (4 or 6 pins) of the VCR/DVD recorder. • To dub videos in high-defi nition quality: - Connect a device that supports high-defi...
Page 50
Copying Files 8 To connect using the AV/S connectors (analog dubbing) S Connector To AC Outlet AV Connector S Cable (optional) S Connector AV Connector Dubbing Operation Set the VCR/DVD recorder to its AUX input mode. Check that the images from the camera are input correctly to the VCR/DVD recorder.
Copying/Moving Still Image Files You can copy or move still image fi les between the HDD and SD card. Preparation: • Slide the power/mode switch to MODE to select mode. • Press the PLAY/REC button to select playback mode. • Make sure that SD card is inserted in the SD slot.
File Backup on a Windows Set Lever DIRECT BACKUP/ EVENT Install the software that came with the camera to your PC. You can back up your fi les on your PC with a simple one-touch operation, edit your fi les on your PC, and also create discs.
Software Installation The following software is included in the CD- ROM that came with your camera. • CyberLink BD Solution Comprehensive application software that consists of the following 3 kinds of software. PowerCinema NE for Everio The main authoring software. You can perform various operations such as fi...
Page 54
File Backup on a Windows Select the desired language and click [OK]. Click [Yes]. The software installation starts. Click [Finish]. ® (Continued) When installation is completed The installed software is displayed in [All Programs]. The backup destination folder [MyWorks] for fi les is created on the hard disk drive that has the most free space.
Connecting the Camera to the PC Preparation: Set the camera’s power/mode switch to OFF. DC Connector PLUG IN POWER USB Cable USB Connector USB Connector NOTES • Never disconnect the USB cable while the access/charge lamp on the camera lights or blinks.
File Backup on a Windows File Backup on the PC This method uses the software on the CD- ROM to back up fi les onto your PC. Video fi les that have never been backed up onto the connected PC are automatically selected from the back up history and backed If you could not install the software, turn to pg.
File Backup on the PC without Using Software Preparation: Connect the camera to the PC with the USB cable. ( pg. 55) On the PC, create a folder to back up fi les into. Set the camera’s power/mode switch to ON. PLAYBACK ON PC BACK UP SELECT...
Other Windows Playing Back Files on the PC Preparation: • Install the software from the provided CD- ROM. ( pg. 53) • Connect the camera to the PC with the USB cable. ( pg. 55) Set the camera’s power/mode switch to ON.
Creating Discs/Editing Files Preparation: • Install the software from the included CD- ROM. ( pg. 53) • Connect the camera to the PC with the USB cable. ( pg. 55) Set the camera’s power/mode switch to ON. PLAYBACK ON PC BACK UP SELECT QUIT...
Page 60
Other Windows Click [Copy/Advanced function]. Click [Create Disc] for creating discs, or [Advanced Editing] for editing. PowerProducer (for creating discs) or PowerDirector (for editing) starts. For more information on detailed operations of the software, refer to their Read me ( or CyberLink web site.
Getting More Use of the Software For more information on operations of the software, see the Tutorials for each software program or the User’s Guides. PowerCinema NE for Everio Select [PowerCinema NE for Everio] from [All Programs]. Click [Tutorial]. PowerProducer 3 NE Select [PowerProducer 3 NE] from [All Programs].
Page 62
Contact us for information on the provided software Use of this software is authorized according to the terms of the software license. When contacting the nearest JVC offi ce or agency in your country (refer to the JVC Worldwide Service Network at http://www.jvc-victor.co.jp/english/worldmap/index-e.html) about this software, please have the following information ready.
File Backup on a Macintosh You can back up camera fi les onto your computer. If the software on the provided CD-ROM is installed, the backed up fi le can be viewed in Quick Time Player or edited in iMovie HD or Final Cut Pro.
File Backup on a Macintosh Click [Continue]. Click [Install]. The software installation starts. Click [Close]. (Continued) Connecting the Camera to the Macintosh Preparation: Set the camera’s power/mode switch to OFF. DC Connector PLUG IN POWER USB Cable USB Connector USB Connector NOTES •...
8 When you have fi nished operation Always follow the procedures below when disconnecting the camera, or turning off the camera/computer power. Failing to do so may cause damage to the camera and computer. 1) Drag & drop the recording medium icon on the desktop into the [Trash] icon.
Changing the Menu Settings Set Lever The following illustrations of display screens are examples of when [DEMO MODE] is set to [OFF]. MENU MENU VIDEO SCENE COUNTER EXTERNAL MIC LEVEL QUALITY ZOOM SELECT QUIT VIDEO SCENE COUNTER EXTERNAL MIC LEVEL QUALITY ZOOM SELECT...
Menus QUALITY Sets the picture quality for videos. ZOOM Sets the maximum zoom ratio. Compensates for hand shake. GAIN UP Makes the subject appear bright automatically when you record in dark places. However, the overall color tones appear grayish. WIND CUT Reduces noise caused by wind.
Changing the Menu Settings Menus QUALITY Sets the picture quality for still images. IMAGE SIZE Selects the picture size for still images. 2 GAIN Sets the ISO setting to increase the sensitivity in dark conditions. CONTINUOUS SHOOTING Records still images continuously while the SNAPSHOT button is pressed.
Menus < DATE/TIME Displays the current time on the LCD monitor. PRESET Returns all the camera settings to their default values. BRIGHT Sets the brightness of the LCD monitor. DROP DETECTION Prevents damage to the HDD by turning off the power automatically when it is detected that the camera dropped.
Page 70
Changing the Menu Settings Menus DISPLAY Displays the on-screen display. % DISPLAY ON TV Displays camera’s on-screen display on a TV screen. VIDEO/S OUTPUT Set the aspect (16:9/4:3) to the screen of the connected television when outputting videos from the AV/S connector. COMPONENT OUTPUT Sets the defi...
Menus ) CLEAN-UP HDD Writing speed to HDD tends to become slow after long periods of repeated use. Execute cleanup periodically to regain the writing speed. * FORMAT HDD Ensures stable speeds and operation when accessing the hard disk drive. , FORMAT SD CARD You have to format newly purchased SD cards with this...
Folder Structure and Extensions Recording medium [DCIM] [XXXJVCSO] [XXXJVCSO] [XXXJVCSO] [SD_VIDEO] [MGR_INFO] [PRGXXX] [PRGXXX.PGI] [MOVXXX.TOD] [MOVXXX.MOI] [PRGXXX] [PRGXXX] [EXTMOV] [MOV_XXXX.TPD] [MOV_XXXX.TPD] [MOV_XXXX.TPD] [MISC] [PRIVATE] * Information such as the date and time of recording, recorded with the video fi le. Extensions Video fi...
If the problem is not solved, reset the camera. ( • If the problem persists, please consult your nearest JVC dealer. 8 To reset the camera 1) Set the power/mode switch to OFF and remove the power supply (battery pack or AC adapter) from the camera, then reattach it.
Page 74
• When the LCD monitor’s LED light reaches the end of its service life, images on the LCD monitor become dark. Consult your nearest JVC dealer. • The LCD monitor is made with high precision technology. However, black spots or bright spots of light (red, green or blue) may appear constantly on the LCD monitor.
Page 75
Trouble • Select the recording medium properly. Playback cannot be • To watch images on a TV, set the TV’s input mode or performed. channel that is appropriate for video playback. • The black & white Do not select the sepia (SEPIA) or monotone (MONOTONE) mode before setting white balance.
Page 76
Troubleshooting Trouble Files cannot be deleted. The data process is too slow after the power is switched on or the mode is changed. The SD card cannot be removed from the camera. When connected with an i.LINK cable, the camera does not operate even if controls are attempted from the...
Warning Indications Indication (Battery indicator) SET DATE/TIME! CHECK LENS COVER HDD ERROR! MEMORY CARD ERROR! CHECK CARD’S WRITE PROTECTION SWITCH VIDEO MANAGEMENT FILE IS BROKEN. TO RECORD/PLAYBACK VIDEO, RECOVERY IS REQUIRED. RECOVER? CAN NOT READ EVENT INFORMATION RECORDING FAILURE POWER NOT ON OR USB DEVICE NOT COMPATIBLE Meaning/Action...
Warning Indications Indication RECORDING MAY NOT BE CORRECT ON THE MEMORY CARD NUMBER OF FOLDERS OVERFLOW PROCESSING CANCELLED DUE TO LACK OF SPACE FOR OPERATION Cleaning Before cleaning, turn off the camera and remove the battery pack and AC adapter. 8 To clean the exterior Wipe gently with a soft cloth.
Specifi cations Camera 8 For general Power supply DC 11 V (Using AC adapter) DC 7.2 V (Using battery pack) Power consumption Approx. 6.7 W (using LCD monitor) Approx. 6.9 W (using LCD monitor and LED light) Dimensions (W x H x D) 82 mm x 75 mm x 154 mm (3-1/4"...
Specifi cations Remote Control Power supply DC 3 V Battery life Approx. 1 year (depending on the frequency of use) Operating distance Within 5 m (16.4 ft) Operating temperature 0°C to 40°C (32°F to 104°F) Approximate recording time (minutes) (for video) Recording medium Quality 1440 CBR...
AC wall outlet other than American National Standard C73 series type use an AC plug adapter, called a “Siemens Plug”, as shown. For this AC plug adapter, consult your nearest JVC dealer. Plug Adapter Battery Packs The supplied battery...
Page 82
Changes or modifi cations not approved by JVC could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.