Software Installation; Pc Programming Software Installation - Panasonic KX-TD612E Installation Manual

2.8 Software Installation

2.8.1 PC Programming Software Installation

To program and administer the software of the KX-TD612 by personal computer (PC), you
need to install the TD612 PC programming software to your computer from CD-ROM. It is
impossible to start the PC programming on CD-ROM. You need to install the PC programming
software to your hard disk and start the programme from the drive you installed the software.
System Requirements:
– Microsoft Windows 95, Windows 98, Windows Me, Windows 2000, or Windows NT 4.0
or later
– Installation of Internet Explorer 4.0 or later
– Minimum requirements
(for installing TD612 PC programming software only)
– Recommendation of the ISDN cards for the remote maintenance
– Trademarks:
Installation Manual
® ®
CPU: Pentium 133 MHz
®
RAM: 48 MB
HDD: 20 MB
FRITZ!Card PCMCIA/AVM
FRITZ!Card PCI/AVM
FRITZ!Card classic/AVM
ELSA MicroLink ISDN USB/ELSA
TM
Xircom CreditCard
®
TM
– Microsoft, Windows and Windows NT are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
– Intel, Xircom, CreditCard, and Pentium are trademarks or registered trademarks of
Intel Corporation or its subsidiaries in the United States and other countries.
– AVM and FRITZ! are either registered trademarks or trademarks of AVM
Computersysteme Vertriebs GmbH & Co. KG in the United States and/or other
countries.
– ELSA and MicroLink are either registered trademarks or trademarks of ELSA AG
in the United States and/or other countries.
– All other trademarks identified herein are the property of their respective owners.
ISDN Adapter/Intel
®
Installation
®
71