Panasonic KX-TDE100 Network Manual page 43

KX-NT265 (Software version 2.00 or later only)
To start programming
Supply power to the IP-PT.
To enter the IP address of the IPCMPR/IPCEMPR card (PBX IP Address)
VOL
Press VOLUME
to select "PBX".
To set VLAN parameters
To the VLAN settings
OR
To end programming
Press STORE.
PROG.
Press PROGRAM
while "Searching" is displayed.
PBX IP
Address
Press SP-PHONE
twice.
The IP-PT will reboot
and can then be
registered to the PBX.
4.3.1 Assigning the IP Addressing Information
HOLD
Press SP-PHONE. Press HOLD to return
to the Menu screen.
IP Networking Guide 43