AEG Voxtel D200 User Manual page 26

26
You will need to enter the 4-digit System PIN (Default PIN is 0000) in order
to de-register a handset from the base station. A de-registered handset
will have the antenna icon flashing and "REGISTER" on the display.
Note:
You cannot de-register the handset that you are currently using.
Press and
OK
Press to show "DELETE HS".
OK
Press and the display shows "PIN? ------".
Enter the 4-digit system PIN (default 0000).
OK
Press and the first handset number is displayed.
Press / to scroll through the list of registered handsets and select
the number of the handset you want to de-register.
OK
Press to confirm, and the chosen handset will be de-registered.
10.6.4 Change the Flash (Recall) Time
You may need to change the recall (flash) time if your phone is connected
to a PBX. The recall time options are "SHORT" (the default value of
100ms), "MEDIUM" (300ms) or "LONG" (600ms).
Press and
OK
Press and
OK
Press and
"MEDIUM", "LONG", with the current setting indicated by an asterisk
to the right).
OK
Press to confirm.
10.6.5 Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the
base station. It is used to protect your phone against unauthorised use.
The default system PIN code is "0000".
Press and
OK
Press and
OK
Press and the display shows "PIN?------"
Enter the old system PIN.
OK
Press to display "NEW PIN?------", and enter your new 4-digit
system PIN.
OK
Press to display "CONFIRM?------", and enter your new 4-digit
system PIN again.
/ to select "BS SETTINGS".
/ to select "BS SETTINGS".
/ to select "FLASH TIME".
/ to select your desired flash time ("SHORT",
/ to select "BS SETTINGS".
/ to select "CHANGE PIN".