Installation; Adapter Plug; Electrical Requirements; Extension Cords - GE 19 Use And Care & Installation Manual

INSTALLATION REQUIREMENTS
How to Connect Electricity
For personal
Preferred method
safety, this
appliance must be
properly grounded.
The power cord of
this appliance is
equipped with a 3-
prong (grounding)
plug which mates
with a standard 3-
prong (grounding)
wall outlet to minimize the possibility of electric
shock hazard from this appliance.
Use of Adapter Plug
Because of
Temporary Method
potential safety
hazards under (Adapter plugs not
permitted in Canada.)
certain conditions,
we strongly
Align large prongs/slots.
recommend
against use of an

adapter plug.

However, if you
still elect to use
an adapter, where
local codes
permit, a
TEMPORARY CONNECTION may be made to a
properly grounded 2-prong wall outlet by use of a UL
listed adapter available at most local hardware stores.
The larger slot in the adapter must be aligned with the
larger slot in the wall outlet to provide proper polarity
in the connection of the power cord.
Use of an adapter plug will increase the clearance
needed for the back of the refrigerator.

Electrical Requirements

The refrigerator should always be plugged into its
own individual electrical outlet which has a voltage
rating that matches the rating plate.
This provides the best performance and also prevents
overloading house wiring circuits which could cause a
fire hazard from overheated wires.
20
IMPORTANT...Please Read Carefully
Insure proper
grounding exists
before using.
Insure proper grounding and firm
connection exists before use.
Have the wall outlet and circuit checked by a
qualified electrician to make sure the outlet is
properly grounded.
Where a standard 2-prong wall outlet is encountered,
it is your personal responsibility and obligation to
have it replaced with a properly grounded 3-prong
wall outlet.
DO NOT, UNDER ANY CIRCUMSTANCES,
CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER CORD.
CAUTION: Attaching the adapter ground terminal
to a wall outlet cover screw does not ground the
appliance unless the cover screw is metal, and not
insulated, and the wall outlet is grounded through the
house wiring. You should have the circuit checked by
a qualified electrician to make sure the outlet is
properly grounded.
When disconnecting the power cord from the
adapter, always hold the adapter in place with one
hand while pulling the power cord plug with the other
hand. If this is not done, the adapter ground terminal
is very likely to break with repeated use.
Should the adapter ground terminal break, DO
NOT USE the appliance until a proper ground has
again been established.
Use of Extension Cords
Because of potential safety hazards under certain
conditions, we strongly recommend against the use of
an extension cord. However, if you still elect to use an
extension cord, it is absolutely necessary that it be a
UL-listed 3-wire grounding type appliance extension
cord having a grounding type plug and outlet and that
the electrical rating of the cord be 15 amperes
(minimum) and 120 volts.