Sony BVM-F250 Operation Manual page 53

Menu
Color Temp Adj
Manual
Manual Adjust
Original Value
Signal
Contrast/Bright Hold
Function and operation ([
Adjusts the color temperature.
When the item is selected, the color temperature data to be adjusted is displayed.
When D93 or D65 data is changed, they are displayed as D93* or D65*.
To change the color temperature data to be adjusted, select D93, D65, User1, User2, User3,
User4 or User5 in the Color Temp menu of the Channel Configuration menu.
Adjusts the color temperature manually.
When the item is selected, the color temperature data to be set is displayed.
When D93 or D65 data is changed, they are displayed as D93* or D65*.
When Contrast/Bright Hold is set to Off, the color temperature data are displayed. The
contrast data is displayed as the picture preset data Preset1 to Preset5 set in the Picture
Preset menu of the Channel Configuration menu. To change the type of the picture preset
data, select from Preset1 to Preset5 in the Picture Preset menu (page 58) of the Channel
Configuration menu.
Adjusts the color temperature using the PHASE, CHROMA, PHASE and/or CONTRAST
knobs.
When the item is selected, the color temperature adjustment display appears, and the Red,
Green and/or Blue color temperature data to be adjusted are displayed to allow gain or bias
adjustment. Select gain or bias adjustment, using the UP/DOWN buttons.
The adjustable items and relevant knobs are as follows:
To adjust Red (red): BRIGHT knob
To adjust Green (green): CHROMA knob
To adjust Blue (blue): PHASE knob
To adjust brightness (Red, Green and Blue together): CONTRAST knob
To hide the characters on the monitor during manual adjustment
Set the CHAR OFF button of the controller to on. As the characters on the display are
hidden, it becomes easy to adjust the picture. To display the characters, set the CHAR OFF
button to off.
To reset Red, Green and Blue to the value before adjustment
During Red, Green and Blue adjustment, you can press the corresponding MANUAL button
to reset to the value before adjustment.
Pressing the MANUAL button of CONTRAST resets all Red, Green and Blue to the values
before adjustment.
Note
You cannot reset the setting after you press the ENTER (Ent) button, even if you press the
MANUAL button.
To cancel adjustment
Press the MENU button. The adjustment data is cleared and the setting returns to the
previous value.
To confirm adjustment
Press the ENTER (Ent) button.
Note
During adjustment, the screen saver is activated automatically if the operating conditions are
met, regardless of the setting of the screen saver function.
Sets the initial value.
You can select from D93, D65, User1, User2, User3, User4 or User5.
When D93 or D65 data is changed, they are displayed as D93* or D65*.
Sets the white signal to be used for adjustment.
[Internal]: Select when an internal signal is used. The signal is automatically switched
in synchronization with the gain and bias adjustments.
External: Select when an external input signal is used. Supply a signal to be used when
adjusting gain and bias.
Sets the contrast and brightness to the adjusted value or the center value.
Off: Sets contrast and brightness to the center values during and after color temperature
adjustment.
[On]: Retains the adjusted contrast and brightness values during and after color
temperature adjustment.
]: factory setting)
53
Adjustment Menu