Pioneer DV-PT100-S Service Manual page 91

5
1-4: VCR DECK (Refer to Fig. 1-4)
NOTE:
Do not remove the cable at the FE Head section. The FE
Head may be damaged if you remove the cable by force.
1. Remove the screw 1.
2. Remove the FE Head.
3. Move the Cassette Holder Assy to the back side.
4. Remove the 2 screws 2.
5. Remove the 2 screws 3.
6. Disconnect the following connectors:
(CP101, CP102, CP3001).
7. Remove the VCR Deck in the direction of arrow.
2
1
FE Head
5
6
2
VCR Deck
3
3
Fig. 1-4
DV-PT100-S
6
7
1-5: VCR PCB (Refer to Fig. 1-5)
1. Remove the screw 1.
2. Remove the 5 screws 2.
3. Remove the 2 screws 3.
4. Remove the 3 pin Shield.
5. Remove the VCR PCB Assy in the direction of arrow.
3
3
3 pin Shield
7
8
A
VCR PCB Assy
B
1
2
2
2
C
Fig. 1-5
D
E
F
91
8