JVC KT-SR1000 Instructions Manual page 8

Installation in Your Car with KS-K6002/KS-K6001 (continued)
4
For KS-K6001:
A If your car stereo does not have a line input
(LINE IN or AUX)...
Plug the cassette adapter into the back of
the cradle—AUDIO OUT.
B If your car stereo has a line input (LINE IN
or AUX)...
Plug the supplied audio cable into the back
of the cradle—AUDIO OUT.
• Plug the audio cable's white (L ch) and red
(R ch) connectors into your car stereo.
For KS-K6002:
Activate the FM signal transmitter (see
page 24), and set the FM frequency output
selector to select one of the following
frequencies—88.1 MHz, 88.3 MHz,
88.5 MHz, and 88.7 MHz.
• It is recommended to preset the frequency
selected by the FM frequency output
selector into your car stereo so you can
easily tune in to the frequency.
8
Finding the Best Antenna Mounting
Location
1
Temporarily plug the antenna into the back of
the cradle—SAT (MAIN) until it is firmly
seated.
2
Find an antenna location on a metal surface of
your car—at least 30 cm × 30 cm (12 inches ×
12 inches), and at least 15 cm (6 inches) from a
window.
• The antenna's powerful magnet will secure it to
the metal surface.
• Best reception is achieved with the antenna
mounted on the roof or trunk for convertibles.
• If your car has a roof rack or skid ribs, it may be
necessary to mount the antenna off-center.
3
Temporarily plug the cigarette lighter adapter
into the cigarette lighter.