Kx-Tda0141 Connecting To Kx-Tda100/Kx-Tda200/Kx-Tda600/Kx-Tde100/Kx-Tde200/Kx-Tde600 - Panasonic KX-TDA0141 Quick Installation Manual

Note
•
The no. 4 and no. 5 pins (Master) of the CS must be connected to a pair of pins on the DHLC/
DLC card. Then use 4 consecutive pairs of pins on the DHLC/DLC card, starting with the pins
corresponding to the Master, as in the example above.
•
When connecting multiple KX-TDA0158 CSs to a DHLC/DLC card, make sure that the no. 4 and
no. 5 pins (Master) of adjacent CSs are at least 3 pairs of pins away on the card.
•
For details about the DHLC/DLC card, refer to the Installation Manual for your PBX.
•
CS connections must be made within the same DHLC/DLC card.
•
When a wrong connection is made, satisfactory performance of the CS cannot be guaranteed.
Check the connection of CS and the PBX using the Maintenance Console. For information about
how to view CS information using the Maintenance Console, refer to "Utility—CS Information" in
the PC Programming Manual for your PBX.
KX-TDA0141 connecting to KX-TDA100/KX-TDA200/KX-TDA600/KX-TDE100/KX-TDE200/
KX-TDE600
Note
The illustration of the PBX is based on the KX-TDE200.
Cable
ø 0.4 mm:
ø 0.5 mm:
ø 0.6 mm:
CAT 5:
CS (RJ11)
Signal Name
Pin No.
D1
D2
Accessories and User-supplied Items for the CS
Accessories (included): Screws ´ 2, Washers ´ 2
User-supplied (not included): RJ11 connector
Note
For details about the DHLC/DLC card, refer to the Installation Manual for your PBX.
Maximum Distance
222 m
347 m
500 m
347 m
1
2
3
4
7 Connecting a Cell Station to the PBX
DHLC8 Card
DHLC/DLC card
(Amphenol)
Signal Name
D1
D2
Quick Installation Guide 39