Table of Contents
Advertisement
Quick Setup
Connecting to a Digital TV Receiver
By connecting a Digital TV Receiver, high definition pictures can be displayed on your monitor
in their digital form.
DTV device
1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to
the HDMI1 DIGITAL-IN on the back of your monitor.
2) Connect a red cable from the DTV decoder RIGHT AUDIO OUT, to the RIGHT AUDIO
"HDMI 1" on the back of your monitor.
3) Connect a white cable from the DTV decoder LEFT AUDIO OUT, to the LEFT AUDIO
"HDMI 1" on the back of your monitor.
• The digital-in terminal is not compatible with the picture signal of a personal computer.
• Use a HDMI to DVI cable (commercially available) in order to digitally connect the monitor
with a DTV decoder.
Notes:
• If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance
may be slightly shifted. Access the "DIGITAL-IN" in the initial setup menu to adjust it. (Refer
to page 44.)
• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to
ANALOG. See "DIGITAL-IN AUDIO", page 44.
18
Downloaded from
www.Manualslib.com
Digital Out
Audio Out
L
R
HDMI to DVI Cable
After the connections have been made,
tighten the screw to secure the cables.
manuals search engine
R - AUDIO - L
HDMI 1
DIGITAL-IN
1
Advertisement
Table of Contents
