Connecting The Monitor; Connecting The Keyboard, Mouse, And Tablet - HP xw8600 Hardware Setup Manual

Product key:
* Visual Effects and Finishing
# Lustre
To Slave Renderer (#)
NVIDIA Quadro FX SDI
Connect to second DVI out
on the main FX 5600 card
NVIDIA Quadro FX 5600
Storage 1,4 to SAN; 2,3 to Stone
To Wire network QUAD GigE
(InfiniBand switch option available)
ATTO 44ES FC opt storage (*)/
QUAD GigE - 0 to Control Surface,
1 to LAN, 3 to SAN (#)

Connecting the Monitor

To connect the monitor:
Use the DVI cable to connect the DVI OUT1 port of the NVIDIA
the DVI-D IN port of the monitor.
You can use the DVI extender cable (DL.CAB-HDTV-FO82MM) to extend the cable to a machine room.
NOTE Although the DVI fiber cable connectors are identical, their functions are different. Ensure that the connector
labeled Send is connected to the workstation, and that the connector labeled Receive is connected to the monitor.

Connecting the Keyboard, Mouse, and Tablet

Connect the keyboard, mouse, and tablet to the USB extender and the workstation before booting the
workstation and before installing the application.
14 | Chapter 3 Connecting Peripherals
HP xw8600 Workstation
To keyboard, mouse,
Monitor calibrator (#)
USB Tablet (*)
To house network (*)
To graphics monitor
ATTO 44ES FC
AJA OEM-2K
Ref in from sync gen
HD-SDI (V2) Out 0:2:2/4:4:4
display device on VTR
HD-SDI (V1) Out 4:2:2 or 4:4:4
display device on VTR
DVI2 Out to FX5600 SDI
daughter card
HD-SDI In (A) from 4:2:2 VTR (or 4:4:4 dual link)
HD-SDI In (B) from 4:4:4 VTR (dual link 0:2:2)
HD-SDI Out (A) to 4:2:2 VTR (or 4:4:4 dual link)
HD-SDI Out (B) to 4:4:4 VTR (dual link 0:2:2)
® ®
Quadro FX 5600 graphics card to