JVC 0405TKH-CR-MU Instruction Manual page 11

Direct Rec
"What You See Is What You Record"
You can easily record to VCR the images
that you are watching on the TV.
For details, read the manual for your VCR.
Use your VCR controls. "DEVICE IS
RECORDING" is displayed.
You cannot carry out Direct Rec using your
TV's control.
Generally, the VCR cannot record a TV
channel that it cannot receive properly on its
own tuner, even if you can view that TV
channel on the TV. However, some VCRs
can record a TV channel by using the TV's
output if that channel can be viewed on the
TV. For details, see your VCR instruction
manual.
Do not turn the TV off in the following
cases.
• when recording images from an external
device connected to the TV (for example
a camcorder)
• when recording a TV channel after it has
been unscrambled on a decoder
• when recording a TV channel by using the
TV's output because the VCR's own
tuner cannot properly receive that
channel.
• when recording Digital terrestrial
broadcasting (DVB-T).
If you change channels or perform
other operations while a Digital
terrestrial broadcasting (DVB-T)
channel is being recorded, a window
appears asking whether to stop the
recording.
Press the a button to stop the
TV/DTV
recording, or the
continue the recording.
button to
When the VCR is not ready, the following
messages are displayed.
ERROR Cause and
MESSAGE countermeasure
NO The VCR is not able to
RECORDING record.
Check the VCR.
NO The RECORDING DEVICE
RECORDING, is not ready to record. Check
MEDIA the VCR tape.
PROBLEM
NO The RECORDING DEVICE
RECORDING, cannot record as it is
DEVICE BUSY recording or playing. Check
the VCR.
Refer to the VCR instruction manual.
TV Auto Power On/VCR Image
View
When the VCR starts playing, the TV
automatically turns on and the images from
EXT-2 terminal are displayed on the screen.
When the VCR menu is operated, the TV
automatically turns on and the images from
EXT-2 terminal are displayed on the screen.
• This function does not operate if your
TV's main power is turned off. Set your
TV's main power to on (standby mode).
Setting up your TV
11