NEC DT730G (CG): ITL-12CG-3 User Manual page 18

1.
• Removing or Attaching Tilt Legs
Removing Tilt Legs
STEP 1:
Turn the terminal over (key side down).
STEP 2:
Lower the Tilt Legs to first position.
For details refer to
STEP 3:
Remove stopper protrusion (a, b) from the
groove of the Tilt Legs (A, B) and place
them flat against the terminal.
STEP 4:
Push downward (c, d) and slide downward.
Lowering Tilt Legs.
Attaching Tilt Legs
STEP 1:
Turn the terminal over (key side down).
STEP 2:
Lay the adjustable Tilt Legs on top of the
terminal.
STEP 3:
Push the Tilt Legs upward until they snap
into place.
10