COLOUR TELEVISION AV-21MS30 EQUALIZER • CINEMA SURROUND • COMPONENT INPUT Contents Knowing your TV’s features ... 3 Remote control buttons and basic functions ... 4 TV buttons and functions ... 6 Setting up your TV ... 7 Basic setting for picture ... 9 Advanced setting for picture ...
Page 2
Never rub it forcefully. Never use any cleaner or detergent on it. Thank you for buying this JVC colour television. 7 If you are not going to use this TV for a long period of time, be sure to disconnect the AC plug from the AC socket.
Confirm your TV’s functions RM-C1286 AV-21MS30 doesn't have PICTURE BOOSTER function and SUPER BASS function. So when you press a button concerned to a function that is not available for your TV, it does not work and the logo “Ø” appears on the screen.
Remote control buttons and basic functions No. Press POWER Turn on or off the TV from standby mode. MENU/OK Display menu and confirm selected function. 5 / ∞ / 2 / 3 Select and adjust menu function. CHANNEL -/+ Select the desired channel number. VOLUME -/+ Adjust the volume level.
Page 5
Remote control buttons and basic functions (continued) How to operate menus and menus locations Operation Press the MENU/OK button 2. Display the MENU Press 5/∞ buttons 3 to choose a Display the top menu menu title. Then press MENU/OK button 2. Press 5/∞...
TV buttons and functions Front of the TV AV-21MS30 MENU CHANNEL VOLUME Rear of the TV AV-21MS30 COMPONENT VIDEO-1 (VIDEO-2) OUTPUT INPUT INPUT OVER / MONO MONO " No. Button/terminal 1 L (main power) 2 POWER lamp POWER 3 ECO sensor...
Turn on the TV by pressing the main power button. JVC logo appears on the screen. MONO JVC logo will appear on the screen again at the phase of “SETUP TOUR RESTART?” function. Then the initial setting can be performed according to page 8.
Page 8
Setting up your TV (continued) Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps as below: LANGUAGE TEXT LANGUAGE ENGLISH GROUP-1 PУCCKИЙ GROUP-2 GROUP-3 MELAYU INDONESIA MENU : OK...
Basic setting for picture COLOUR SYSTEM You can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting. AUTO SECAM NTSC4.43 To operate this function with a menu: ❇...
Page 10
Basic setting for picture (continued) PICTURE SETTING You can adjust the desired picture setting when selecting USER in PICTURE MODE. Select the USER in PICTURE MODE under PICTURE menu. ❇ PICTURE menu MENU USER Select the PICTURE SETTING in PICTURE menu, then adjust the setting.
Advanced setting for picture AI ECO SENSOR (ECO) You can adjust TV screen contrast according to the brightness of your room. Press the ECO button to select the desired mode. Cancel the function. MODE-1 Mild contrast (recommended). MODE-2 Even contrast. DISPLAY Display the graphic of the function.
Original features for picture TELETEXT You can watch the Teletext broadcast channel with TEXT function. Press the TEXT button to select the desired mode as follows: TV mode TEXT twin mode Press the CHANNEL -/+ buttons, number buttons or colour buttons to select other Teletext pages.
Basic setting for sound SOUND SYSTEM You can select an appropriate sound system when abnormal sound occurs even when the picture appears normally. Press the SOUND SYSTEM button to select a setting. This function is not available in video mode. For the sound system in each country or region, see the table below: Area...
Advanced setting for sound CINEMA SURROUND You can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting. Cancel the function. Listen to sound with wider audience effect. This function is not available when the SOUND MODE is set to SOUND TURBO.
DVD function AUTO SIGNAL DETECT When the DVD input signal is detected. The input mode will be changed to VIDEO-2 automatically. For The DVD player, press the “POWER ON” button of the machine so that the signal can be detected. For the VCR, press the “POWER ON”...
Customized setting You can reduce the picture noise. Select the VNR in the PICTURE menu, then choose a setting of VNR function. ❇ MENU PICTURE menu VNR is turned off. AUTO Effect of VNR is automatically controlled. Effect of VNR becomes minimum level. Effect of VNR becomes maximum level.
Page 17
Customized setting (continued) VIDEO-2 SETTING You can set the VIDEO-2 SETTING according to the video signal output from the external devices connected to the VIDEO-2 terminal. Select the VIDEO-2 SETTING in INSTALL menu, then choose a setting (Factory setting is COMPONENT). ❇...
TV channel presetting To register the TV channels automatically (AUTO PROGRAM) You can register the TV channels into the TV’s channel list automatically. Display the INSTALL menu. ❇ INSTALL menu MENU Choose AUTO PROGRAM, then press the MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered in the channel list (PR LIST) automatically.
Page 19
TV channel presetting (continued) To edit the channel list (PR LIST) (MOVE and DELETE in the EDIT menu) You can edit the TV channel list as you like. Note: After this operation, other channel’s PR numbers will be changed. Display the INSTALL menu. ❇...
Page 20
TV channel presetting (continued) CH/CC number When you want to use the INSERT function on page 19, find the CH/CC number corresponding to the channel number of the TV channel from this table. Channel No. Country United States, Philippines, etc.. CCIR Middle East, Southeast Asia, etc..
• Turn off all the devices including the TV. • Note that connecting cables are not supplied. Connecting to front video input terminal Front of TV AV-21MS30 Headphones Connecting to rear component/video input terminal and output terminal Rear of TV...
Troubleshooting If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair. • No picture, • Deactivate the BLUE BACK function if it is turned on. no sound • Choose the appropriate sound system. Refer to “SOUND SYSTEM”...
Specifications TV RF systems B, G, I, D, K, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. Power requirements AC 110 to 240 V, 50 Hz / 60 Hz External input / output...