Decoding Illumination (Hand-Held Mode Only); Multicode Mode - Motorola DS4208 Product Reference Manual

Decoding Illumination (Hand-held Mode only)

Parameter # F0h 2Ah
Selecting Enable Decoding Illumination causes the digital scanner to flash illumination to aid decoding. Select
Disable Decoding Illumination to prevent the digital scanner from using decoding illumination.
Enabling illumination usually results in superior decoding. The effectiveness of the illumination decreases as the
distance to the target increases.
*
Enable Decoding Illumination
(01h)

Multicode Mode

Parameter # F1h A5h
Enable this parameter to allow multiple bar codes to decode upon one trigger event based on the programmed
multicode expression. The digital scanner reports a successful decode and provides user indication only if it
decodes all bar codes indicated by the multicode expression, otherwise the decode fails. Bar codes are transmitted
in the order defined in the multicode expression. Disable this to operate in normal decode mode.
NOTES
Enabling Multicode Mode disables
Multicode does not operate in presentation mode.
Do not use Multicode Mode if
When using this mode, always orient the digital scanner at the same distance and angle (perpendicular).
*
Disable Multicode Mode
(00h)
User Preferences & Miscellaneous Digital Scanner Options 4 - 23
Disable Decoding Illumination
Picklist Mode.
Continuous Bar Code Read
(00h)
is enabled.
Enable Multicode Mode
(01h)