Epson DM-D110 Technical Reference Manual page 24

14. Set the DIP switch of the DM-D110 and switch the communication speed as follows. (Refer to
Chapter 3 doe details of the DIP switch setting.)
Communication speed:
Communication data length:
Parity:
15. Attach the base plate to the DM-D stand following the numbered arrows shown below. Then
push the base plate until it is locked by the hook on the DM-D stand.
16. When the extension support (DP-105) is used, attach Velcro tapes to the four corners of the
plate to keep the unit from falling down. This completes the setting.
2-10 Setup information
19200bps
8Bit
Off
1
2
. A
Rev