Related Manuals for JVC HV-28D40BK
Summary of Contents for JVC HV-28D40BK
- Page 1 HV-32D40BK HV-28D40BK Integrated Digital Colour Television Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) Number: 3081 INSTRUCTIONS...
- Page 2 Warning DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adaptor or consult your dealer.
- Page 3 How to move the TV When moving the TV, make sure that it is held by two people as shown in the illustration. Be careful not to trap your hands when putting the TV down.
- Page 4 Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
- Page 5 Digital terrestrial broadcasting (DVB-T) service area Although this TV can receive both Digital terrestrial broadcasting (DVB-T) and Analogue terrestrial broadcasting, depending on the area in which you live, you may not be able to receive Digital terrestrial broadcasting (DVB-T). For details of the Digital terrestrial broadcasting (DVB-T) service area, refer to the FREEVIEW website etc.
-
Page 6: Table Of Contents
Using the FREEZE function ... 20 Using the MULTI-PICTURE function ... 20 Using the GUIDE ... 22 Displaying the Subtitles... 24 Operating a JVC brand VCR or DVD player... 24 Teletext function ...25 Basic operation (Digital)... 25 Basic operation (Analogue)... 26 Using the List Mode ... -
Page 7: Setting Up Your Tv
Setting up your TV Caution • Turn off all the equipment including the TV before connecting anything. Connecting the aerial • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected. If you connect via a device with an antenna terminal such as a VCR, follow A →... -
Page 8: Connecting The Power Cord To The Ac Outlet
Initial settings When the TV is first turned on, it goes into the initial settings mode, and you will see the JVC logo. Follow the instructions on the screen display to make the initial settings. TV/DTV buttons... - Page 9 The power lamp lights green and the JVC logo appears. Main power button • If the JVC logo does not appear this is because your TV has already been turned on for the first time: Perform the initial settings with “Installation”...
- Page 10 Setting up your TV After the AUTO PROGRAM has finished, the EDIT menu appears > EDIT BBC1 BBC2 MOVE D0038-EK • If you want to, you can now edit the programme numbers (PR) using the EDIT/MANUAL function. For details, see “EDIT/MANUAL (Analogue)” on page 36.
-
Page 11: T-V Link Functions
To use T-V LINK functions: A “T-V LINK compatible VCR” means a JVC video cassette recorder with the T-V LINK logo, or with one of the following logos. However, these VCRs may support some or all of the features described earlier. - Page 12 Setting up your TV Direct Rec “What You See Is What You Record” You can easily record to VCR the images that you are watching on the TV. For details, read the manual for your VCR. Use your VCR controls. “DEVICE IS RECORDING”...
-
Page 13: Tv Buttons And Functions
TV buttons and functions L/MONO EXT-5 L/MONO EXT-5 See the pages in parentheses for details. 1 Main power button (pages 9, 13) 2 Power lamp (pages 9, 13) 3 Remote control sensor 4 r (Volume) button (page 14) 5 P p buttons/ q buttons (page 13) 6 Headphone jack (mini jack) (page 53) 7 EXT-5 terminal (pages 42, 53) Turn the main power on... -
Page 14: Adjust The Volume
TV buttons and functions Adjust the volume 1 Press the r (Volume) button once The volume level indicator appears. 2 Press the q buttons while the volume level indicator is displayed... -
Page 15: Remote Control Buttons And Functions
Remote control buttons and functions 1 Muting button 2 Number buttons 3 Information button 4 Colour button TV/DTV button 6 7 buttons 7 g (Text) button 8 p p buttons 9 VCR/DVD/Teletext control buttons 0 p buttons - c button = 3 button ~ # (Standby) button ! VCR/TV/DVD switch... -
Page 16: Choose A Tv Channel And Watch Images From External Devices
Remote control buttons and functions Choose a TV channel and watch images from external devices • If the picture is tilted, correct it. See “PICTURE TILT” on page 40. Switching between Digital terrestrial broadcasting (DVB-T) and Analogue terrestrial broadcasting. Press the TV/DTV button. The broadcasting is switched every time the button is pressed. -
Page 17: Adjust The Volume
To use the programme number PR 0 (AV): When the TV and VCR are connected only by the aerial cable, choosing the programme number PR 0 (AV) allows you to view images from the VCR. Set the VCR RF channel to the programme number PR 0 (AV) manually. -
Page 18: Zoom Function
Remote control buttons and functions Channel number display: The channel number and channel name (when the channel name is registered) of the programme you are watching or the EXT terminal number is displayed. Time display: The current time of the teletext data is displayed. - Page 19 14:9 ZOOM: This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen. 16:9 ZOOM: This zooms up the wide picture (16:9 aspect ratio) to the full screen. 16:9 ZOOM SUBTITLE: This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen.
-
Page 20: 3D Cinema Sound Function
Remote control buttons and functions 3D CINEMA SOUND function You can enjoy sounds with a wider ambience. • This function does not work for the sound from headphones. Press the 3 button and choose “ON”, “MONO” or “OFF”. Choose to add the 3D CINEMA SOUND effect to stereo sound. - Page 21 • Choose the main-picture channel by pressing the p p buttons. Choose the sub-picture channel by pressing the p buttons. • You cannot use the g (swap) button. When watching Digital terrestrial broadcasting (DVB-T), the main- picture and sub-picture cannot be switched.
-
Page 22: Using The Guide
Remote control buttons and functions - The pictures cannot be swapped when a picture of 625p or 525p signal from EXT-4 is being displayed as the main picture. • Do not press the g (swap) button while you are recording the TV output on the VCR. - Page 23 Pressing the h (Information) button to display the help screen. Press it again to return to the guide screen. Electronic Programme Guide 1 BBC ONE 13:12 The Rugby World Cu... 07:45-15:10 Fiji v USA, Italy v Tonga & Samoa v Uruguay Red: Page up Green: Page down...
-
Page 24: Displaying The Subtitles
2 Press the VCR/DVD Control Button to control your VCR or DVD player • If your device is not made by JVC, • Even if your device is made by JVC, • You can use the p buttons to choose •... -
Page 25: Teletext Function
Teletext function Number buttons Colour buttons buttons Basic operation (Digital) When watching Digital terrestrial broadcasting (DVB-T): With Digital terrestrial broadcasting (DVB- T), in addition to pictures and sound, you can also watch digital teletext. Digital teletext is sometimes broadcast at the same time as normal broadcasting. -
Page 26: Basic Operation (Analogue)
Teletext function When watching Analogue terrestrial broadcasting: Basic operation (Analogue) You can view two types of teletext broadcasts on the TV: FLOF (Fastext) and WST. 1 Choose a TV channel with a teletext broadcast 2 Set the VCR/TV/DVD switch to the TV position 3 Press g (Text) button to display the teletext... -
Page 27: Hold
Hold You can hold a teletext page on the screen for as long as you want, even while several other teletext pages are being received. Press the C (Hold) button Hold indication To cancel the Hold function: Press C (Hold) button again. Sub-page Some teletext pages include sub-pages that are automatically displayed. -
Page 28: Using The Tv's Menu
Using the TV’s menu This TV has a number of functions you can operate using menus. To use all your TV’s functions, you need to understand the basic menu operating techniques fully. Buttons used to operate the menus TV/DTV Basic operation 1 Press the H button to display the menu bar D0105-EN... -
Page 29: Picture Menu
PICTURE menu PICTURE PICTURE MODE CONTRAST BRIGHT SHARP COLOUR COLOUR TEMP. FEATURES D0014-EN • While the PICTURE menu is displayed, pressing the blue button will set the CONTRAST, BRIGHT, SHARP, COLOUR, HUE settings to their default settings. PICTURE MODE You can choose one of three PICTURE MODEs to adjust the picture settings automatically. -
Page 30: Features
PICTURE menu FEATURES Choose FEATURES and press the a or 3 button to display the sub-menu. > FEATURES DIGITAL VNR Super DigiPure MOVIE THEATRE Colour DigiPure COLOUR SYSTEM 4:3 AUTO ASPECT D1015-EN • COLOUR SYSTEM cannot be chosen when watching Digital terrestrial broadcasting in one screen. -
Page 31: Colour System
MIN: The level of DigiPure effect is set to the minimum. When you set the Super DigiPure function to AUTO and notice some noise, change the setting from AUTO to MIN. • The MIN setting is not suitable for high- quality pictures which contain very little noise. - Page 32 PICTURE menu AUTO: This function detects a colour system from the input signal. You can only use this when you are viewing a picture from programme number PR 0 (AV), or an EXT terminal. • The AUTO function may not function properly if you have poor signal quality.
-
Page 33: Sound Menu
SOUND menu SOUND STEREO/ BASS TREBLE BALANCE HEADPHONE VOLUME 3D CINEMA SOUND D0019-EN • Functions in the “SOUND” menu other than “HEADPHONE VOLUME” work for the TV speakers. They do not work for the sound from the headphones. • When the headphones are connected and only one screen is displayed, only “HEADPHONE VOLUME”... -
Page 34: Features Menu
FEATURES menu FEATURES SLEEP TIMER CHILD LOCK APPEARANCE BLUE BACK D0023-EN • CHILD LOCK, APPEARANCE and BLUE BACK cannot be chosen when watching Digital terrestrial broadcasting (DVB-T). SLEEP TIMER You can set the TV to automatically turn off after a set period of time. 1 Choose SLEEP TIMER. -
Page 35: Appearance
4 Press the 6 buttons to choose a TV channel Every time you press the 6 buttons, the Programme number (PR) changes, and the picture of the TV channel registered in the Programme number (PR) is displayed on the screen. 5 Press the blue button and set the CHILD LOCK function. -
Page 36: Set Up Menu
SET UP menu SET UP AUTO PROGRAM EDIT/MANUAL PICTURE TILT DECODER(EXT-2) EXT SETTING ATTENUATOR D0029-EN • AUTO PROGRAM, EDIT/MANUAL, PICTURE TILT and DECODER (EXT-2) cannot be chosen when watching Digital terrestrial broadcasting (DVB-T). AUTO PROGRAM (Analogue) You can again perform the AUTO PROGRAM function TV channel automatic registration which was performed in the “Initial settings”... - Page 37 Basic operation 1 Choose EDIT/MANUAL, then press the a or 3 button The EDIT menu appears. > EDIT BBC1 CH 21 BBC2 CH 22 CH 23 CH 24 CH 25 CH 26 CH 27 CH 28 CH 29 MOVE INSERT D0038-EK 2 Follow the description for the function you want to use...
- Page 38 SET UP menu DELETE 1 Press the 6 buttons to choose a TV channel Every time you press the 6 buttons, the programme number (PR) changes and the picture of the TV channel stored in the programme number (PR) appears on the screen.
- Page 39 INSERT 1 Press the 6 buttons to choose a programme number (PR) for which you will register a new TV channel 2 Press the green button and start the INSERT function > EDIT BBC1 CH 21 BBC2 CH 22 CH 23 CH 24 CH 25 CH 26...
-
Page 40: Picture Tilt
SET UP menu CH NUMBER • When you want to use the INSERT function on page 39, find the CH/CC number corresponding to the channel number of the TV channel from this table. If you want to know a particular TV channel’s channel menu, look in TV listings magazines or contact the broadcaster. -
Page 41: Decoder (Ext-2)
DECODER (EXT-2) If you have a decoder connected to a T-V LINK compatible VCR, which in turn is connected to the EXT-2 terminal, use the DECODER (EXT-2) function to unscramble the scrambled TV channels. 1 Turn on the decoder power 2 Display the scrambled TV channel on the TV Even if the decoder is working, a... -
Page 42: Ext Setting
SET UP menu EXT SETTING 1 Choose EXT SETTING, then press the a or 3 button The EXT SETTING menu appears. > EXT SETTING EXT-1 EXT-3 EXT-5 D0020-EN 2 Follow the instructions for the function you want to use and operate the function S-IN: You can enjoy the high-quality picture of... - Page 43 ID LIST You can store a name for each of the devices connected to each EXT terminal. Giving a name to an EXT terminal makes the EXT terminal number appear on the screen, together with its name. 1 Press the 5 or 6 buttons to choose an EXT terminal 2 Press the blue button to display the name list (ID LIST)
-
Page 44: Attenuator
SET UP menu The picture and sound of the Analogue terrestrial broadcasting TV channel you are currently viewing are output from the EXT-2 terminal. DTV: The picture and sound of the Digital terrestrial broadcasting (DVB-T) TV channel you are currently viewing are output from the EXT-2 terminal. -
Page 45: Dtv Menu
DTV menu Timers Configuration Edit PR List Installation Common Interface D0209-EN • DTV in the menu bar can only be chosen when watching Digital terrestrial broadcasting (DVB-T). Timers (DTV Timer Recording) By setting the timer, you can record a Digital terrestrial broadcasting (DVB-T) programme with a VCR connected to EXT-2 or EXT-3 while you are out. - Page 46 DTV menu End: Set the timer end time with the number buttons. • When the 5 buttons are pressed, the input position moves. Press the 4 button. Date: Set the date for the timer to work with the number buttons. •...
-
Page 47: Configuration
Reactivating the cancelled timer setting Display the TIMER MENU and press the 6 buttons to choose which timer setting to reactivate. Press the 5 buttons so that “Active” appears in the Mode column. Aborting the timer recording Display the Digital terrestrial broadcasting (DVB-T) channel picture on the screen and press the h (Information) button. -
Page 48: Receiver Upgrade
DTV menu The Edit PR List Favourites settings are enabled. When the p p button is pressed, only the channels chosen in the Edit PR List Favourites (those with the icon) can be chosen. • For details on how to set your favourite channels, see “Setting the favourite channels”... -
Page 49: Edit Pr List
Enter PIN code Choose Enter PIN code to change the PIN code for the Edit PR List menu’s “Lock”. The PIN code factory setting (how it is set when you purchase the television) is 0000. 1 Press the 6 buttons and choose Enter PIN code, then press a button 2 Input the current PIN code... - Page 50 DTV menu • When the b button is pressed, the previous screen is returned to. When the or H buttons are pressed, TV/DTV the menu disappears. • When the h (Information) button is pressed, the help screen appears. When it is pressed again, the previous screen is returned to.
- Page 51 Locking a channel Digital terrestrial broadcasting (DVB-T) channels can be locked in the same way as the FEATURES menu CHILD LOCK. 1 Press the 5 buttons and choose Lock on the bar at the bottom of the screen 2 Press the 6 buttons and choose the channel to be locked, and then press the a button The Enter PIN code input window...
-
Page 52: Installation
DTV menu Installation Use when re-registering a channel or when registering a new channel. 1 Choose Installation and press the a button The Installation menu appears. Installation Automatic Search Manual Search Factory Settings D0220-EN 2 Press the 6 buttons and choose the channel registration method, and then press the a button Automatic Search:... -
Page 53: Additional Preparation
Additional preparation Connecting external equipment Connect the equipment to the TV, making the correct rear panel and front panel connections. Before connecting anything: • Read the manuals that came with the equipment. Depending on the equipment, the connection method may be different from the diagram. -
Page 54: Connecting Headphones
Additional preparation Equipment which can output the S-VIDEO signal (Y/C signal) Connect the equipment to an EXT terminal (but not the EXT-1 terminal). You can choose between an S-VIDEO signal (Y/C signal) and a regular video signal (composite signal). For details of how to operate the equipment, see “S-IN (S-VIDEO input)”... - Page 55 Connecting speakers/amplifier While referring to the audio equipment connection diagram, connect the audio equipment you want to the TV. You can use external front speakers to listen to the TV sound instead of the TV speakers. Before connecting anything: • Read the manuals provided with the amplifier and speakers.
-
Page 56: Troubleshooting
Troubleshooting Digital terrestrial broadcasting (DVB-T) service area Although this TV can receive both Digital terrestrial broadcasting (DVB-T) and Analogue terrestrial broadcasting, depending on the area in which you live, you may not be able to receive Digital terrestrial broadcasting (DVB-T). For details of the Digital terrestrial broadcasting (DVB-T) service area, refer to the FREEVIEW website etc. -
Page 57: Poor Sound
• Have the COLOUR and BRIGHT settings been adjusted properly? Follow the description “BRIGHT” and “COLOUR” on page 29 to try to adjust them properly. • Videotaping teletext is not recommended because it may not record correctly. • When a white and bright still image (such as a white dress) is displayed on the screen, the white part may look as if it is coloured. - Page 58 Troubleshooting • The TV may make a crackling sound due to a sudden change in temperature. The picture or sound may be normal. If you hear crackling sounds frequently while you are viewing the TV, there may be other causes. As a precaution, ask your service technician to inspect it.
-
Page 59: Specifications
(The DTV signal is converted to analogue and then outputted.) is converted to analogue and then outputted.) L/R inputs are available. available. HV-28D40BK 148 W (Standby: 2.0 W) Viewable area 66 cm (measured diagonally) 762 mm × 528 mm × 493 mm... - Page 60 LCT1596-001A-U © 2004 VICTOR COMPANY OF JAPAN, LIMITED 0404-T-CR-JMUK...