Rpn Correct Menu; Executing Auto Detection; Correction Mode Settings; Channel Setting - Sony PMW-EX1R Service Manual

Solid-state memory camcorder wide conversion lens vcl-ex0877
Hide thumbs Also See for PMW-EX1R:
Table of Contents

Advertisement

4-4. RPN CORRECT Menu

The RPN CORRECT menu enables various operations such as manual registration, deletion and automatic
detection of the RPN compensation point.

4-4-1. Executing Auto Detection

. The Auto Detection menu enables automatic detection of RPN point.
. When the Auto Detection menu is selected, the Execute and Cancel choices appear.
In addition, selecting Execute starts RPN Auto Detection.
. The RPN point that is detected by the Auto Detection is added to the RPN correction point.
n
Auto Detection cannot be executed under the following settings.
Change the settings to execute Auto Detection.
. When Video Format other than HQ 1080/60i or HQ 1080/50i is selected.
. When electronic shutter is operating in the SLS mode.
. When the EX Slow Shutter is set to ON.

4-4-2. Correction Mode Settings

. The Correction Mode menu enables selection of the RPN correction mode for a pixel when the pixel is
registered by manual registration of RPN.
. The Correction Mode selecting Concealment and Compensation.
. For the manual registration of RPN, select Concealment.

4-4-3. Channel Setting

. The Channel menu enables selection of the channel (R-ch or G-ch or B-ch) to execute Record of RPN
pixel on, in the manual registration of RPN.
. When the RPN cursor (indicating location of an RPN pixel to register) is moved to an already-registered
RPN correction point by the Cursor Next or Cursor Prev operation, the correction mode selected for the
RPN point is displayed automatically.

4-4-4. Cursor Setting

. The Cursor menu enables turning On or Off the crosshair cursor display indicating the RPN correction
position in the manual registration of RPN.
. When the Cursor menu is turned On, the crosshair cursor indicating the RPN correction position is
displayed superimposed on the video signal.
. Signal of the pixel located at the center of the crosshair cursor is replaced by black.
. The Cursor setting is always turned Off when the power is turned On.
4-8 (E)
PMW-EX1R

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vcl-ex0877

Table of Contents