Table of Contents
Advertisement
Before attempting to connect, operate or adjust this product, please read these instructions thoroughly.
Spanish Quick Use Guide is included.
Guía para rápida consulta en español está incluida.
For USA assistance, please call: 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
Digital Video Camcorder
Operating Instructions
PV-DC152
Models No.
PV-DC252
PV-DC152-K
PV-DC252-K
Mini
R
LSQT0559A
Advertisement
Table of Contents
Related Manuals for Panasonic Palmcorder Multicam PV-DC152
Summary of Contents for Panasonic Palmcorder Multicam PV-DC152
-
Page 1: Operating Instructions
Before attempting to connect, operate or adjust this product, please read these instructions thoroughly. Spanish Quick Use Guide is included. Guía para rápida consulta en español está incluida. For USA assistance, please call: 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca LSQT0559A... -
Page 2: Safety Precautions
Panasonic Responsible party: Matsushita Electric Corporation of America Address: One Panasonic Way, Secaucus, New Jersey 07094 Telephone number: 1-800-211-PANA (7262) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 3: Important Safeguards
Important Safeguards 11) Grounding or Polarization—This video unit may be equipped with either a polarized 2-wire AC (Alternating Current) line plug (a plug having one blade wider than the other) or 3-wire grounding type plug, a plug having a 1) Read Instructions—All the safety and operating third (grounding) pin. - Page 4 Important Safeguards Precautions USE & LOCATION ≥TO AVOID SHOCK HAZARD ... Your Palmcorder and 17) Objects and Liquids — Never push objects of any kind power supply should not be exposed to rain or moisture. into this video unit through openings as they may touch Do not connect the power supply or operate your dangerous voltage points or short out parts that could Palmcorder if it gets wet.
-
Page 5: Table Of Contents
Contents Before Using Special Features Before Using................ 6 Using a Memory Card............34 Standard Accessories ............6 Recording on the Memory Card......... 34 Quick Guide................. 7 Playing Back Files from the Memory Card ......36 To View the Playback Picture..........7 Copying Pictures from a Memory Card to a Cassette .. -
Page 6: Before Using
Before Using Before Using These operating Instructions are designed for use with models PV-DC252/ PV-DC252-K and PV-DC152/PV-DC152-K. Pictures may be slightly different from the original. ≥The illustrations used in these Operating Instructions show model PV-DAC11 (For USA) PV-DC252, however, parts of the explanation refer to different models. -
Page 7: Quick Guide
Quick Guide Charge the Battery. (l 12) ≥Connect the AC Cable to the AC Adaptor and plug it into the AC Wall Outlet. ≥Attach the Battery to the AC Adaptor. (This will start the charging process.) ≥The [POWER] Lamp and [CHARGE] Lamp lights up, and charging starts. -
Page 8: Controls And Components
29) Off/On Mode Selector Switch [OFF/ON/MODE] 30) Operation Mode Lamps [CAMERA/VCR/CARD P.B.] (PV-DC252/PV-DC252-K) (l 14, 20, 29, 36)/[CAMERA/VCR] (PV-DC152/PV-DC152-K) (l 14, 20, 29) 31) Tripod Receptacle ≥Use for mounting the Palmcorder on an optional tripod. 32) Battery Eject Lever [BATT] (l 12) - Page 9 33) Reset Button [RESET] (l 67) 34) Speaker 35) Cassette Holder 36) Cassette Eject Lever [OPEN/EJECT] (l 13) 37) Cassette Cover Close Button [PUSH CLOSE] (l 13) 38) Cassette Compartment Cover (l 13) 39) Lens Hood (l 62) 40) Lens 41) Tally Lamp (l 20) 38) 39) 42) White Balance Sensor (l 26, 63)
-
Page 10: Remote Controller
Remote Controller Using the wireless remote controller that is supplied with the Palmcorder, most of the Palmcorder functions can be operated from a distance. START/ PHOTO DATE/ STOP SHOT TIME Remote Controller Buttons 1) Date and Time Button [DATE/TIME] (l 55) COUNTER RESET TITLE... - Page 11 ........................................................Replace battery with Panasonic PART NO. VSBW0004 (CR2025) only. Use of another battery may present a risk of fire or explosion. Caution: Battery may explode if mistreated. Dispose of used battery promptly. Keep away from children.
-
Page 12: Power Supply
Power Supply ª Using the AC Adaptor Insert the battery-shaped connector of the DC Cable into the Battery Holder on the Palmcorder. Connect the DC Cable to the [DC OUT] Jack on the AC Adaptor. Connect the AC Adaptor and AC Cable. ≥The AC Cable’s outlet plug cannot be pushed fully into the AC Adaptor Jack. -
Page 13: Lens Cap And Grip Belt
Lens Cap and Grip Belt ª Attach the Lens Cap To protect the Lens surface, attach the Lens Cap. Pass the end of the Lens Cap String through the Lens Cap String holder. Pass the other end of the String through the loop made by the String itself and pull it toward the direction indicated by an arrow. -
Page 14: Turning On/Off The Palmcorder And Selecting Modes
Turning on/off the Palmcorder and Selecting Modes Turn on the power first and then select Modes. ª How to Turn on the Power 1, 2 Set the [OFF/ON/MODE] Switch to [ON] while pressing the center Button ≥The [CAMERA] Lamp lights up. ª... -
Page 15: Using The Menu Screen
Using the Menu Screen To facilitate the selection of a desired function or setting, this Palmcorder 2, 3, 4, 5 displays various function settings on menus. 1, 2 Press the [MENU] Button. ≥The Menu corresponding to the Mode selected by using the [OFF/ON/ MODE] Switch is displayed. -
Page 16: List Of Menus
List of Menus The illustrations of the Menus are for explanation purposes only, and they are different from the actual Menus. CAMERA SETUP PROG.AE OFF 5 Camera Mode Main-Menu [CAMERA FUNCTIONS] Ω º PROGRESSIVE AUTO ON OFF [CAMERA SETUP] Sub-Menu OFF 25 D.ZOOM 1) Auto Exposure Mode [PROG.AE] (l 24) - Page 17 VCR Mode Main-Menu [VCR FUNCTIONS] [PLAYBACK FUNCTIONS] Sub-Menu 1) Blank Search [BLANK SEARCH] (l 30) 2) Recording to Card [RECORD TO CARD] (PV-DC252/PV-DC252-K) PLAYBACK FUNCTIONS BLANK SEARCH ---- YES (l 35) RECORD TO CARD ---- YES INDEX PHOTO SCENE 3) Index Search Mode [INDEX] (l 31) AUDIO ST1 ST2 MIX AUDIO OUT...
- Page 18 Card Playback Mode Main-Menu [CARD FUNCTIONS] (PV-DC252/PV-DC252-K) [DELETE CARD FILE] Sub-Menu 1) Selecting and deleting a File [DELETE FILE BY SELECTION] (l 40) DELETE CARD FILE 2) Deleting All Files [DELETE ALL FILES] (l 40) 1.DELETE FILE BY SELECTION 3) Selecting and Deleting a Title [DELETE TITLE BY SELECTION] (l 40) 2.DELETE ALL FILES 3.DELETE TITLE [CARD EDITING] Sub-Menu...
-
Page 19: Setting Date And Time
Setting Date and Time Press the [MENU] Button and rotate the [PUSH] Dial to select CLOCK-SET [OTHER FUNCTIONS] >> [CLOCK-SET] >> [YES]. YEAR :2002 MONTH :JAN Rotate and press the [PUSH] Dial to select [YEAR]/[MONTH]/ HOUR : 8PM MINUTE:46 [DAY]/[HOUR]/[MINUTE] and set it to a desired value. ≥Year will cycle in the order shown below. -
Page 20: Camera Mode
CAMERA Mode Recording Set the [OFF/ON/MODE] Switch to [ON]. ≥The [CAMERA] Lamp lights up. Slide the [TAPE/CARD] Selector towards [TAPE]. (PV-DC252/PV-DC252-K) Press the Recording Start/Stop Button. CAMERA ≥Recording starts. CARD ≥After the [RECORD] indicator is displayed, it changes to [REC]. P.B. -
Page 21: Photoshot Recording On The Dv Cassette
PhotoShot Recording on the DV Cassette With this function, you can record still pictures with sound for approximately PHOTO SHOT 7 seconds each on the Cassette. Slide the [TAPE/CARD] Selector to [TAPE]. (PV-DC252/PV-DC252-K) Press the [PHOTO SHOT] Button in the Recording Pause Mode. -
Page 22: Digital Zoom Function
Digital Zoom Function This function is useful when you want to record close-up shots of subjects located beyond a normal zoom range of 1t to 10t magnification. With the Digital Zoom Function, you can select a magnification of 25t or 700t. Set [CAMERA FUNCTIONS] >>... -
Page 23: Cinema Function
Cinema Function This function is for recording in a cinema-like wide screen. Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [CINEMA] >> [ON]. ≥Black bars appear at the top and bottom of the screen. To Cancel the Cinema Mode Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [CINEMA] >> [OFF]. ≥For other notes, see page 57. -
Page 24: Quick Start
Quick Start When this feature is activated, you can resume recording quickly even if the Palmcorder goes into standby mode (when left in Pause mode for 5 minutes). Palmcorder will be ready for shooting in approximately 1.5 seconds when the Power switch is turned [OFF] and back to [ON] again. -
Page 25: Manual Shutter Speed Adjustment
Manual Shutter Speed Adjustment Useful for Recording fast-moving subjects. Set the Mode Selector Switch to [MANUAL]. 2, 3 ≥The [MNL] Indication appears. Press the [PUSH] Dial repeatedly until the shutter speed Indication appears. Rotate the [PUSH] Dial to adjust the shutter speed. The Range of Shutter Speed Adjustment 1/60–1/8000 The standard shutter speed is 1/60 second. -
Page 26: Recording In Natural Colors (White Balance)
Recording in Natural Colors (White Balance) Depending on the scene or light conditions, the Automatic White Balance Adjustment Mode may not be able to bring out natural colors. In such a case, 2, 3 the white balance can be adjusted manually. Set the Mode Selector Switch to [MANUAL]. -
Page 27: Digital Effect Functions
Digital Effect Functions This Palmcorder is equipped with digital effect functions that add special 1) MULTI 2) P-IN-P effects to the scene. Digital Effects 1 [EFFECT1] 1) [MULTI] Multi-Picture Mode 2) [P-IN-P] Picture-in-Picture Mode 3) [WIPE] Wipe Mode 3) WIPE 4) MIX 4) [MIX] Mix Mode 5) [STROBE] Strobe Mode... -
Page 28: Multi-Picture Mode
ª Multi-Picture Mode Strobe Multi-Picture Mode PHOTO SHOT You can capture and record 9 consecutive small still pictures. Manual Multi-Picture Mode You can manually capture and record 9 small still pictures. After setting [CAMERA FUNCTIONS] >> [DIGITAL EFFECT] >> [EFFECT1] >> [MULTI]..Set [MULTI-PICTURES] >>... -
Page 29: Vcr Mode
VCR Mode Playing Back The recorded scene can be played back immediately after recording. Rotate the [OFF/ON/MODE] Switch and set the Palmcorder in the VCR Mode. ≥The [VCR] Lamp lights up. Press the [6] Button to rewind the tape. ≥Rewind the tape to the point where you want to start playback. CAMERA ≥When the tape reaches the beginning, rewinding stops automatically. -
Page 30: Slow Motion Playback
Slow Motion Playback This Palmcorder can play back at a slow speed. Press the [1] Button. Press the [E] Button or the [D] Button on the Remote START/ Controller. DATE/ PHOTO STOP TIME SHOT ≥When the [ ] Button is pressed, Slow Motion Playback proceeds in the COUNTER RESET TITLE... -
Page 31: Index Search Functions
Index Search Functions To facilitate searching of desired scene, this Palmcorder automatically records index signals during recording, as explained in the following. PhotoShot Index Signal These signals are automatically recorded whenever still pictures are taken in PhotoShot Mode (l 21). When recording still pictures using the Continuous PhotoShot Mode (l 21), the index signal is not recorded. -
Page 32: Playback Zoom Function
Playback Zoom Function A part of the image can be enlarged up to 10 times during playback. During playback, press the [P.B. ZOOM] Button on the START/ DATE/ PHOTO STOP SHOT TIME Remote Controller. COUNTER RESET TITLE ZOOM ≥The center of the image is enlarged to approximately double the size. MULTI/ A.DUB P-IN-P... -
Page 33: Playing Back On Your Tv
Playing Back on Your TV By connecting your Palmcorder to your TV, the recorded scenes can be viewed on your TV screen. [S-VIDEO IN] ≥Before connecting them, turn off the power of both the Palmcorder and TV. Connect the [A/V OUT] Jack of the Palmcorder to the Video [VIDEO IN] and Audio Input Jacks of the TV. -
Page 34: Special Features
Special Features The PV-DC252 and PV-DC252-K models come with card functions. Using a Memory Card A Card can be used to record files or play back files. ≥Use a genuine SD Memory Card or MultiMediaCard only. ª Inserting a Memory Card Before inserting a Memory Card, be sure to turn off the Palmcorder. - Page 35 ª Card PhotoShot (continued) Recording from a Cassette (VCR Mode) PHOTO SHOT Set the [TAPE/CARD] Selector to [CARD]. Set [VCR FUNCTIONS] >> [CARD SETUP] >> [PICTURE QUALITY] >> a desired picture quality. Start playback and press the [PHOTO SHOT] Button at the scene you want to record.
-
Page 36: Playing Back Files From The Memory Card
Playing Back Files from the Memory Card It allows you to play back files recorded on a Card. ª Playing back Still Pictures Set the Palmcorder to Card Playback Mode. ≥The [CARD P.B.] Lamp lights up. ≥The still picture that was recorded last on the Card is displayed. Start Playback. -
Page 37: Copying Pictures From A Memory Card To A Cassette
Copying pictures from a Memory Card to a Cassette PHOTO SHOT After setting the Palmcorder to the Card Playback Mode (l 36)..To Copy One Picture Set the [TAPE/CARD] Selector to [TAPE]. Display a desired picture on a Memory Card. ≥Please refer to "To select a Desired File and Play it Back”. -
Page 38: Slide Show
Slide Show The recorded still pictures in the Card can be played back like a Slide Show. You can set up a Slide Show or change the content. 1, 2, 3, 1, 6, 7 4, 5, 7 To Select Pictures to Play Back in Slide Show 1, 3 Set [CARD FUNCTIONS] >>... -
Page 39: Creating A Title
Creating a Title You can create a title and record on a Memory Card. Camera Mode: CARD CARD TAPE In PV-DC252 or PV-DC252-K, slide the [TAPE/CARD] Selector to [CARD]. PHOTO ≥The [PICTURE] indication appears. SHOT Set the Lens to the image you want to use for creating a title. VCR Mode: Search for the image you want to use for creating a title and set the Palmcorder to Still Playback Mode. -
Page 40: Protecting The Files On A Memory Card From Accidental Erasure (File Lock)
Protecting the Files on a Memory Card from Accidental Erasure (File Lock) Precious files recorded on a Memory Card can be locked to prevent accidental erasure. (Even if files are locked, the files will be deleted when the Memory Card is formatted.) 1, 2, After setting the Palmcorder to the Card Playback Mode (l 36).. -
Page 41: Formatting A Memory Card
Formatting a Memory Card If a Memory Card becomes unreadable by the Palmcorder, formatting it may make it reusable. Formatting will delete all the data recorded on a Memory Card. After setting the Palmcorder to Card Playback Mode (l 36)..Set [CARD FUNCTIONS] >>... -
Page 42: Copying Your Dv Cassette To An S-Vhs Or Vhs Cassette (Dubbing)
Copying your DV Cassette to an S-VHS or VHS Cassette (Dubbing) 2, 4, 5 After connecting the Palmcorder and the S-Video, Video and Audio Input Jacks of the VCR as illustrated on the left, start the following procedure. ≥Be sure to press the [OSD] Button on the Remote Controller before copying so that no indications are left visible. -
Page 43: Using Your Palmcorder With Digital Video Equipment (Dubbing)
Using your Palmcorder with Digital Video Equipment (Dubbing) By connecting this Palmcorder with other digital video equipment (such as another Palmcorder of the same format/model) that has a DV input/output terminal (i.LINK) using a 4-pin to 4-pin DV Interface cable PV-DDC9 (optional) , high quality image and sounds can be dubbed in the digital mode. -
Page 44: Using The Software With A Computer
An image stored on the DV Cassette can be transferred to your Personal Computer. ≥For models PV-DC152 and PV-DC152-K, PhotoShot transfer from the DV Cassette can be accomplished using the PhotoVu Link software and RS-232C cable kit (optional). Model number PV-DRS2 (l l l l 65) ª... -
Page 45: Arcsoft Software
ArcSoft Software There are 4 types of image editing software in the ArcSoft Software package. Before you begin... Open [Start] >> [Programs] >> [ArcSoft] >> [Panorama Maker 3.0] or [PhotoImpression 3.0] or [PhotoBase 3.0] or [PhotoPrinter 2000 Pro]. Panorama Maker 3.0 (Windows, Mac) ≥Easy-to-use photo-stitching program seamlessly combines multiple photos into a single panoramic picture. -
Page 46: Using The Supplied Usb Connection Kit
Using the Supplied USB Connection Kit (PV-DC252/PV-DC252-K) ª Operating environment USB Driver can be installed in a PC/AT compatible personal computer ® ® ® which can run Microsoft Windows XP, Windows Me, Windows 98SE, ® Windows 2000 Professional. ≥USB Driver VFA0366 ®... -
Page 47: Check If Palmcorder Is Correctly Recognized
Double click the icon in task tray. ≥Hardware disconnect dialog box appears. Select [Panasonic DVC USB Driver] and click [Stop]. Verify [Panasonic DVC USB Driver] is selected and click [OK]. Click [OK]. ≥You can safely disconnect the cable. ®... -
Page 48: Verifying And Updating Driver
Select [Start] >> [Settings] >> [Control Panel], double click [System] select device driver tab, verify [Panasonic DVC USB Driver] and [Panasonic DVC Port Driver] are displayed in [Universal Serial Bus controllers] of [Device Manager]. ≥If [DVC] is displayed in [Other devices] of [Device Manager] tab, we... - Page 49 (Palmcorder must be connected to computer.) Select [Start] >> [Settings] >> [Control Panel], double click [System] Hardware tab, Device Manager. Verify [Panasonic DVC USB Driver] and [USB Root Hub] in [Universal Serial Bus Controllers] of [Device Manager] of [Hardware]. ≥If [USB Mass Storage Device] is shown in [Universal Serial Bus controllers] of [Device Manager] tab, we recommend updating the driver as described below to Panasonic DVC USB Driver.
- Page 50 Select [Start] >> [Settings] >> [Control Panel], double click [System], Device Manager tab and verify [Panasonic DVC USB Driver] is displayed in [Universal Serial Bus controllers] of [Device Manager]. ≥If [USB Mass Storage Device] is displayed in [Universal Serial Bus controllers] of [Device Manager] tab, we recommend updating the driver by following the steps below.
-
Page 51: If You No Longer Need Software Or Driver (Uninstall)
Select the application software you want to remove. ª Uninstalling ArcSoft Software 1 1 1 1 Select [ArcSoft Software]. ª Uninstalling USB driver Select [USB Driver for Panasonic DVC]. Uninstalling steps may vary depending on the OS. Please refer to the user manual of your OS. -
Page 52: Notes
ª About the folder structure when using the Notes (PV-DC252/PV-DC252-K) Memory Card in a personal computer ≥Do not disconnect USB Connection Cable while the ≥When a Card with data recorded on it is inserted into a operation light of Palmcorder is on. It may freeze the personal computer, folders will be displayed as in the software or destroy the data in transfer. -
Page 53: Others
0:00.00 R0:45 INDEX D.ZOOM P-IN-P NEGA VOLUME 5:30:45PM OCT 1 2002 6) Index ≥For several seconds while index signals are being Others recorded, the [INDEX] Indication flashes. (l 31) Search Number [S1] (l 31) Indications ≥The figure indicates which number of scenes ahead from the present scene is to be played back. - Page 54 PICTURE SLIDE! 100-0012 ª 1/500 F2.4 MAGICPIX µ Z.MIC WIND-CUT F 15 640 PICTURE 11) Recording Mode 22) Card File Indications 2 (CARD P.B. Mode) ≥AUTO: ≥Image size [ This appears when Mode Selector Switch is ] (l 34, 36) set to [AUTO].
-
Page 55: Warning/Alarm Indications
ª Changing the Counter Display Mode AV INPUT RECORDING: When you are attempting to record By changing [C.DISPLAY] on the [DISPLAY SETUP] on the Memory Card during dubbing Sub-Menu, you can change the Counter Display Mode to (l 43) on the Cassette. Tape Counter Indication (0:00.00), Memory Counter NO CARD: There is no Memory Card inserted. -
Page 56: Notes & Precautions
ª Progressive PhotoShot Notes & Precautions Function (l 21) ≥When you change to the still picture Mode, you will hear a click. This is the sound of the iris closing and not an ª Power-Related Items (l 12) indication of malfunction. ≥When the Palmcorder is used for a long time, the Camera ≥If you record still pictures in Progressive PhotoShot body becomes warm, but this is not a malfunction. - Page 57 ª Fade In/Out Mode ª Manual Shutter Speed Adjustment (l 22) (l 25) ≥You may see vertical lines of light in the playback image of Fading-in and fading-out cannot be used when recording still pictures in the PhotoShot Mode, Digital Still picture Mode, a brightly shining subject or highly reflective subject.
- Page 58 ª Digital Effect Functions (Camera Mode) ª Playback Digital Effect Functions (l 32) ≥Revised signals of images to which digital effects are (l 27) added during playback cannot be output from the DV ≥If you set [EFFECT1] on [DIGITAL EFFECT] Sub-Menu to Terminal or Digital Still Picture Terminal.
-
Page 59: Using A Card In A Personal Computer
ª Card PhotoShot ª Title Functions (l 34) (l 39) (PV-DC252/PV-DC252-K) (PV-DC252/PV-DC252-K) ≥The sound cannot be recorded. ≥Even if the contrast of the Title is adjusted, the portions ≥The Shutter Effect cannot be used. where there is little difference between light and dark and ≥The Progressive Function is set to [ON]. -
Page 60: Cautions For Use
Cautions for Use Do not spray insecticides or volatile chemicals onto the Palmcorder. ≥If the Palmcorder is sprayed with such chemicals, the ª After Use Palmcorder body may deform and the surface finish may Take out the Cassette. (l 13) peel off. -
Page 61: Optimal Use Of The Battery
Palmcorder needs to be cleaned at a service center. ≥The number of hours you should wait depends on the Please consult a distributor or Panasonic Servicenter. amount of condensation and ambient temperature. ≥Video head cleaners can be purchased from service 2 to 3 hours later, turn on the Palmcorder and centers. -
Page 62: Cautions For Storage
ª Cautions for Storage ª LCD Monitor/Viewfinder/Lens Hood Before storing the Palmcorder, take the Cassette out LCD Monitor ≥In a place with drastic temperature changes, condensation and detach the Battery. Store all the components in a dry place with a relatively may take place on the LCD Monitor. -
Page 63: Explanation Of Terms
Explanation of Terms Auto White Balance Adjustment This Palmcorder stores settings that are optimal for several ª Digital Video System kinds of general light sources. The Palmcorder determines In a digital video system, images and sounds are converted the hue of light that it receives through the lens and White into digital signals and recorded on a tape. -
Page 64: Specifications
(Stereo mini jack) Digital Still Picture: Digital Still Picture Output, Control Signal Input/Output (Transfer rate: max. 115 kbps) RS-232C serial output (PV-DC152/PV-DC152-K): RS-232 output terminal for transfer from tape. PhotoVu Link software and RS-232C cable optional (PV-DRS2) (PV-DC252/PV-DC252-K): Card reader/writer function, USB 2,0 compliant (max. -
Page 65: Palmcorder Accessory System
Palmcorder Accessory System Accessory# Figure Description PV-DAC11A (For USA) AC Adaptor with AC Cable PV-DAC11A-K and DC Cable (For Canada) *CGR-D08A/1B 800mAH/ Rechargeable (Replaces Lithium Ion Battery Pack *CGR-D120A/1B) *CGR-D16A/1B 1600mAH/ Rechargeable (Replaces Lithium Ion Battery Pack *CGR-D220A/1B) 2800mAH/Rechargeable *CGP-D28A/1B Lithium Ion Battery Pack *CGR-D53A/1K 5300mAH/Rechargeable... -
Page 66: Palmcorder Accessory Order Form
CALL PANASONIC’S ACCESSORY ORDER LINE AT 1-800-332-5368 [6 AM-5 PM M-F, 6 AM-10:30 AM SAT, PACIFIC TIME] MAIL THIS ORDER TO: PANASONIC SERVICES COMPANY ACCESSORY ORDER OFFICE 20421 84th Avenue South Kent, WA. 98032 In CANADA, please contact your local Dealer for more information on Accessories. -
Page 67: Before Requesting Service (Problems And Solutions)
Before Requesting Service (Problems and Solutions) If you are experiencing one of the following problems with your Digital Palmcorder, it may be something you can correct yourself. Check the list below for symptoms and corrections. Problems Solutions The Palmcorder power cannot be turned on. Is the power source connected correctly? The Palmcorder power turned off automatically. - Page 68 Cassette or personal computer. (l 37, 46) Even if a Card is formatted, it cannot be used. There is a possibility of damage to either the Palmcorder or (PV-DC252/PV-DC252-K) the Card. Please contact Panasonic Call Center.
-
Page 69: Request For Service Notice
Mail this completed form and your Proof of Purchase along with your unit to: Panasonic Services Company 1705 N. Randall Road Elgin, IL. 60123-7847 Attn: Camcorder Repair Please write the displayed above Self Diagnostic number here. -
Page 70: Limited Warranty
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) -
Page 71: Servicenter List
Customer’s in Puerto Rico, please ship or carry in to location below (“Service in Puerto Rico”). Service in Puerto Rico Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company/ Factory Servicenter: Ave. 65 de Infantería. Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985... -
Page 72: Warranty
5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase. -
Page 73: Index
Index ª A ª N AC Adaptor................ 12 Negative Mode............. 27, 32 ª P ArcSoft................45 Audio Dubbing..............33 Palmcorder Accessory............65 Auto Focus ................ 63 PhotoShot ................21 Auto White Balance Adjustment........63 Picture-in-Picture Mode ............. 28 ª B Playback Digital Effect Functions ........ -
Page 74: Spanish Quick Use Guide/Guía Española Para El Uso Rápido
Spanish Quick Use Guide/Guía española para el uso rápido ª Para iniciar Cargue la batería. ≥Conecte el cable eléctrico de CA en el adaptador de CA y en la toma de corriente de CA. ≥Coloque la batería con el adaptador de CA. (Eso hará empezar la carga). - Page 75 ª Para introducir una tarjeta de memoria. Antes de introducir una tarjeta de memoria, asegúrese de que esté desactivada la videocámara. Empuje la palanca [OPEN] hacia la derecha y abra el asiento de la tarjeta de memoria. Manteniendo la tarjeta de memoria con su ángulo cortado hacia la derecha, introdúzcala en la ranura de tarjeta.
- Page 76 Executive Office: One Panasonic Way, Secaucus, NJ 07094 (201) 348-7000 Panasonic Company East: 6749 Baymeadow Drive, Glen Burnie, MD 21060 Panasonic Company Central: 1707 North Randall Road, Elgin, IL 60123 Panasonic Company West: 6550 Katella Avenue, Cypress, CA 90630 Division of Matsushita Electric Corporation of America Panasonic Sales Company ("PSC")