NEC UNIVERGE SV8300 User Manual page 3

Answering and transferring an incoming CO line call
With an incoming call in progress (DDD, FX, or WATS line key LED is flashing, C.O. ring is
heard):
1. Press the flashing line key or the Answer key.
2. The First available LOOP key LED lights steady green. Incoming indication stops.
The LCD shows the trunk name and number.
3. Press the Transfer key and dial the station number to be transferred to, or press the
desired DSS key. The LCD shows the called station number.
4. Press the RLS key or go on-hook.
To Hold a call
With a call in progress:
1. Press the Hold key. The LOOP key flashes green.
2. Go on-hook or press the RLS key.
To retrieve a held call
1. Go off-hook.
2. Press the flashing LOOP key. The LED key indication goes to steady green.
3. Converse.
To set/cancel Message Waiting
1. Press the MW key on the DSS/BLF console to enter the Message Wait mode.
2. Press the associated DSS key for the desired station. The associated LED lights
steady green for set Message Waiting or extinguishes when Message Waiting is canceled.
3. Press the MW key to return to the normal DSS mode.
To set/cancel Do Not Disturb
1. Press the DND key on the DSS/BLF console to enter the Do Not Disturb mode.
2. Press the applicable DSS key for the desired station. The associated LED lights
steady green when Do Not
Disturb is set and extinguishes when Do Not Disturb is canceled.
3. Press the DND key to return to the normal DSS mode.
To set/cancel Night Service
1. Press the NT key on the DSS/BLF Console.
OR
Dial the Night Service set/cancel code when off-hook on the primary extension.
Answering an Operator call
1. Press the OPE key. The associated LED lights steady green. The LCD will display either the
trunk name and number or the station name and number.
2. Converse.