Philips SimplyGo Quick Start Manual page 2

SimplyGo - Getting started
Alarm silence Increase/decrease the flow rate
On/off button Mode selection Cannula connector
Select the mode you've been prescribed
Pulse mode
SimplyGo detects each breath intake and delivers the oxygen
delivery accordingly.
Continuous-flow mode
Continuous oxygen delivery from 0.5 to 2 LPM.
Sleep mode
Pulse mode with an increased detection sensitivity to sense
breath intake more accurately at night. SimplyGo automatically switches to the
last continuous flow setting used if no breath is detected after a period of time.
Operating SimplyGo
Charge the battery Insert SimplyGo into its Insert the charged
1 2 3
or use the charger. carrying case. battery.
Connect a standard
Turn on/off SimplyGo Select the mode by
single lumen nasal by pressing the power pressing the mode (M)
cannula. Make sure it is not button twice. button. Continue pressing
pinched or kinked. the Mode button to scroll
through the Pulse, Continuous
Maximum length up to 9 m (30 ft).
flow, or Sleep modes.
Set the flow rate in Make sure you have all Position the nasal
accordance with your the accessories you cannula on your face
oxygen prescription using the need. Install SimplyGo on and breathe normally through
plus (+) or minus (-) buttons. the cart. the nose.
Simply before you go
SimplyGo is your ideal travel companion. Discover some useful tips
when traveling with a portable oxygen concentrator.
Inform your physician about your trip; your prescription may need to be
adapted depending on climate or altitude of your destination.
When booking your trip, inform the transportation company that you
intend to use your SimplyGo during the journey.
Learn about the carrier's specific policy or requirements regarding
oxygen therapy patients.
Make sure you have all the SimplyGo accessories you need.
Contact your homecare provider if necessary.
At departure
Make sure you carry a copy of your oxygen therapy prescription with
you at all times. Make sure you have the name and contact information
of your homecare provider. Copy these onto your SimplyGo Quick
start guide.
Verify that your SimplyGo batteries are fully charged and that you have
your oxygen cannula with you.
Verify that you have the necessary power supplies to recharge
SimplyGo batteries.
Keep your SimplyGo Quick start guide and your SimplyGo user manual
together with your device at all times.
SimplyGo battery specifications
Battery autonomy
Pulse mode setting 1 2 3 4 5
*
3 h 42 3 h 30 3 h 06 2 h 42 2 h 18
7 h 24 7 h 00 6 h 12 5 h 24 4 h 24
11 h 06 10 h 30 9 h 18 8 h 06 6 h 54
14 h 48 14 h 00 12 h 24 10 h 48 9 h 12
Continuous flow setting 0.5 1
3 h 06 2 h 18
6 h 12 4 h 36
9 h 18 6 h 54
12 h 24 9 h 12
Charging time 2-3 hours per battery when fully discharged
* Based on 20 breaths per minute
Attach SimplyGo on the cart...
and on you go!
6
1 h 54
3 h 18
5 h 42
7 h 36
2
0 h 42
1 h 24
2 h 06
2 h 48