Remote Specifications - Panasonic BT-LH1800p Operating Instructions Manual

REMOTE Specifications

_ GPI hard specification
8 inputs (refer to D-SUB 9-pin terminal)
5 3 2
4 1
9
8 7 6
_ ON/OFF operation
Each terminal of REMOTE operates its assigned function accord-
ing to the setting with GND (Pin 5) shorted (ON) or opened (OFF).
_ How to assign the function to each terminal
The assignment to each terminal can be freely executed by
the On Screen Menu.
(Refer to "How To Use On Screen Menu".)
[REMOTE CONFIG]
>GPI1
GPI2
GPI3
GPI4
GPI5
GPI6
GPI7
GPI8
REMOTE CONFIG menu
[List of Assigning Functions]
Assignment items Function
UNDEF Undefined (terminal assignment
not defined)
MARKER1 ON/OFF ON/OFF of marker selected by
2)
PRESET1*
MARKER2 ON/OFF ON/OFF of marker selected by
PRESET2* 2)
MARKER HALF Background of marker being
displayed is set to HALF.
MARKER BLACK Background of marker being
displayed is set to BLACK.
INPUT SEL. A Input system is changed to A.
INPUT SEL. B Input system is changed to B.
INPUT SEL. S Input system is changed to S.
INPUT SEL. OP Input system is changed to
OPTION.
SD ASPECT Display change in SD,
16:9 (ON)/4:3 (OFF)
HD ZOOM Display change in HD (1080I,
1035I, 720P), 4:3 (ON) enlarged/
16:9 (OFF)
BACKLIGHT OFF Brightness of backlight is set to
minimum.
10
Pin No. Contents
Pin 1–Pin 4 GPI 1–GPI 4
Pin 5 GND
Pin 6–Pin 9 GPI 5–GPI 8
UNDEF
UNDEF
UNDEF
UNDEF
UNDEF
UNDEF
All initial
UNDEF
states are
UNDEF
undefined
(UNDEF).
Operating
conditions* 1)
––––
Level operation
Level operation
Level operation
Level operation
Edge operation
Edge operation
Edge operation
Edge operation
Level operation
Level operation
Level operation
_ Priority order of each function
• When MARKER 1 and MARKER 2 are simultaneously turned
ON, the priority is given to MARKER 1.
• 4:3/13:9/14:9 MARKER is displayed only when 16:9 is dis-
played. 95%/93%/88%/80% MARKER is automatically
changed in size according to 4:3 and 16:9 display.
• When MARKER HALF and MARKER BLACK are simulta-
neously turned ON, the priority is given to BLACK.
• In case same setting is assigned to a plurality of terminals,
ON operation continues until all terminals turn OFF. (Level
operation terminal only)
Ex.) Operation with GPI1 and GPI5 set to MARKER 1:
GPI1
GPI5
MARKER 1
• In case of edge operation terminal, the priority is given to the
terminal turned ON later.
• In case the operation is impossible, REMOTE terminal will
not operate. (Refer to the example below.)
1) 4:3/13:9/14:9 MARKER display in 4:3 display.
2) HD ZOOM selection in case of a signal other than 1080I,
1035I, 720P signal.
3) SD aspect selection in case of HD.
4) INPUT OP selection when option unit is not installed.
* 1) Operating conditions
Level operation: It operates only while GPI terminal is shorted to
GND.
Edge operation: It operates at edge of the fall when shorted to
GND.
* 2) MARKER displayed by PRESET 1 and PRESET 2 is the one se-
lected by the menu for MARKER setting. (It is set by [MARKER]-
[GPI]PRESET 1 and PRESET 2 in the menu.)
3)
* MARKER HALF and MARKER BLACK are effective only when
4:3/13:9/14:9 MARKER is displayed by using MARKER 1 and
MARKER 2.
(For the detail, refer to the "Description of MARKER.")
GPI1
GPI5
MARKER 1