Aslp11 Connectors; Table 2: Amc Port Mapping - GE TELUM ASLP11 Reference Manual

ASLP11 Connectors

GE Intelligent Platforms – ASLP11 Hardware Reference Manual, Third Edition
This chapter describes connector pin assignments on the ASLP11.
AMC Connector Port Mapping
This Table describes the port mapping according to the AMC spec.

Table 2: AMC port mapping

Port # ASLP11 Function
Port 0 Gigabit Ethernet 0
Port 1 Gigabit Ethernet 1
Port 2 SATA 0
Port 3 SATA 1
Port 4 PCI Express 0
Port 5 PCI Express 1
Port 6 PCI Express 2
Port 7 PCI Express 3
Port 8 PCI Express 4
Port 9 PCI Express 5
Port 10 PCI Express 6
Port 11 PCI Express 7
Port 12 Not connected
Port 13 Not connected
Port 14 Not connected
Port 15 Not connected
Port 16 used as TCLKC, TCLKD within the
AMC spec.
Port 17 Not connected
Port 18 Not connected (opt. USB)
Port 19 Not connected (opt. Debug)
Port 20 Not connected (opt. Serial)
FCLKA Input for PCIe 100MHz clock
Optional 100MHz clock output for
uTCA applications
TCLKA Not connected
TCLKB Not connected
TCLKC Not connected
TCLKD Not connected
* violates AMC.0 if optionally mounted, because there is no Tx/Rx separation
within the USB. The voltage level is according to AMC.0.
AMC spec.
AMC.2 E2
AMC.2 E2
AMC.3 S2
AMC.3 S2
AMC.1 Type 8
AMC.1 Type 8
AMC.1 Type 8
AMC.1 Type 8
AMC.1 Type 8
AMC.1 Type 8
AMC.1 Type 8
AMC.1 Type 8
(*)
(default disabled)
(default disabled)
Page 36