Maintenance Page - JVC VN-C20 Instructions Manual

Setting Using Internet Explorer
Setting (continued)

Maintenance Page

This page is for maintenance purposes.
This page can be used during access using AadminB.
A
All Settings
"Restores all settings
to their default
values"
B
Update
52
Restores all setting items to their factory settings and reboots the unit.
(It takes about 1 minute for the camera to initialize and reboot.)
Passwords will also be initialized. However, the built-in clock of VN-C20 will
not be affected. JPEG transmission and all others services that are running
will be discontinued.
Upgrades the firmware version of VN-C20 and reboots the unit.
The VN-C20 settings will be saved. Copy the new firmware file to the
computer on which Internet Explorer is used, and specify this file using the
[Browse] button. Press the [Update] button to start upgrading the version.
JPEG transmission and all others services that are running will be
discontinued. Update may take several minutes.
A message will be displayed on the Internet Explorer when update is
successfully completed.
Caution:
● Do not turn off the power when version upgrade is in progress. Turning off
the power of the camera may cause it to malfunction.
A
B