Table of Contents
Advertisement
Item
ExDR Level
(Continued)
V.Sharpness
BLC
Function/Set Value
To make a low-light section of the object easy to view: Increase
the level.
To make a highlighted section of the object easy to view: De-
crease the level.
Setting values : -5 to 5
• When the difference in brightness between objects is large,
the picture may not change even when the ExDR LEVEL is
varied. This is due to the characteristics of the camera and is
not a malfunction.
• When the item "SHUTTER" is set to 1/250 or higher,the set-
tings to the item "ExDR LEVEL" cannot be carried out.
• When the item "ExDR MODE" is set to OFF, the settings for
the item "ExDR LEVEL" cannot be carried out.
This function sets sharpness in the vertical direction of the
image.
NORMAL : Normal sharpness.
HIGH
: High sharpness.
The following phenomena may be observed when HIGH is
selected. This is not a malfunction.
* Horizontal stripes are observed on bright objects.
* Vague horizontal stripes are observed under low light condi-
tions.
Sets of area of back light compensation. Use this function when
the object appears dark (under auto iris control) because of
the presence of a bright light source behind it. This function
make it possible to place the unnecessary light source outside
the photometry area.
OFF
ARER 1 to AREA 4 : Select one of the four types.
Photometry Area
Photometry
Area
OFF
Area 1
When the item "ExDR MODE" is set to ON, the item "BLC" is
set to OFF. Under this condition, the settings to the item "BLC"
cannot be varied.
: The backlight compensation function
does not work.
Photometry Area
Photometry
Area
Area 2
Area 3
Initial Value
0
NORMAL
OFF
Photometry
Area
Area 4
63
Advertisement
Table of Contents
