Playing Back Recorded Images Via Front Panel Control; Select A View; Searching Recorded Image Using A Specific Date/Time; Playing, Skipping And Stopping Recorded Images - JVC VR-N1600E Startup Manual

Basic Operation
Playing Back Recorded
Images via Front Panel
Control
This section describes the procedures for playing back
recorded images using the front panel of VR-N1600U/E.
Displaying the [Browse] Screen
1
Press the [LIVE/BROWSE] button when the
wallpaper or main menu screen is displayed
● The NVR Viewer starts up and the [Live] screen
appears.
2
When the [Live] screen appears, press the
[LIVE/BROWSE] button again
● Press the button to toggle between the [Live] and
[Browse] screens.
[Live] Screen

Select a view

For details on the view settings, refer to [INSTRUCRTIONS].
1
Press the [PTZ/PRESET] button until the [PTZ/
PRESET] indicator blinks.
● The [PTZ/PRESET] indicator switches between lit and
blinking each time the [PTZ/PRESET] button is
pressed.
2
Press the [15/ZOOM IN] or [14/ZOOM OUT]
button to select a view
Note :
● Do not switch the view frequently within a short time
interval.
● When live images do not appear on VN-C625/VN-C655,
set the password on the camera unit as well as VR-
N1600U/E again. For details on the setting procedures,
refer to the [INSTRUCRTIONS] of the camera in use and
procedures for setting the root password on the [Edit
device settings] screen in this manual .
● The setting in the [Audio] section is set to No Audio
Sources when you return from the setting screen to
[Browse]. Select the audio parameters again.
Searching Recorded Image Using a Specific Date/
Time
You can search for and play back images by specifying a
date and time using the [SEARCH] button on the front panel.
1
Press the [SEARCH] button on the [Browse]
screen
● The date and time input screen appears.
2
Use the keypad to enter the search date and
time
● Use the [SKIP] button (S or T) to select an item
and input accordingly.
3
Press the [16/ENTER] button
● The view in the image display screen on the right
jumps to the selected date and time.
Memo :
● You can also jump to the selected date/time by clicking the
[Go To] button.
● When you are using the software keyboard, click the [Go
To] button.

Playing, Skipping and Stopping Recorded Images

Control using the [PLAY], [SKIP], and [Stop] buttons.
Control using the [PLAY], [SKIP], and [PLAY] buttons
on the front panel
[LIVE/BROWSE] Button/Indicator
Keypad/Indicator
WARNING
LIVE/BROWSE
OPERATE ALARM
SELECT HDD
LOCK
REC CONTROL
PTZ/PRESET
FUNCTION
SERIAL
CANCEL ZOOM OUT ZOOM IN ENTER
[SEARCH] Button
[16/ENTER] Button
[13/CANCEL] Button
[PTZ/PRESET] Button/Indicator
[Go To] Button
[STOP(PB)] Button
REV
SEARCH キーロック KEY ALARM CLEAR REC/STOP STOP(PB) PLAY
[SKIP] Button
FWD
SKIP