D-Link DIR615 Installation Manual page 4

Open a browser and type in the ip address
the url address bar of the browser. You will see a file upload
screen that allows you to load another firmware image. Find the
image on your PC and press 'Send'
The browser will load the new firmware, indicate progress and
finally reboot. This may take 5 minutes or more.
Now set your computer back to
receiving an IP address through
DHCP again (setting "Obtain IP
address automatically")
Open a new browser window. Type in
the address http://192.168.12.1
the address bar of your browser and
press 'Enter'.
You will be presented with the
firmware's logon screen.
Enter 'admin' as user and 'shae-4' as
password.
(You can change the password later to
anything you like.)
You will see the initial System Info
screen, giving you details about version
and status of the firmware.
You were Successful!
Next Step is to register the router.
Chillifire Hotspot Router Installation Guide
http://192.168.0.1
into
into
Version 09.07