TopPage PG-F211X/PG-F261X SERVICE MANUAL No. S57K1PG-F211X MULTIMEDIA PROJECTOR PG-F211X PG-F261X MODELS In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig- inal condition and only parts identical to those specified should be used.
R/C RECEIVER Unit DUNTKE152WEF0 DUNTKE153FMF6 (PG-F211X) No parts changed MAIN Unit DUNTKE153FMF4 (XG-F210X) DUNTKE153FMF7 (PG-F261X) No parts changed ← DMD Unit DUNTKE154WEF0 CABINET AND MECHANICAL PARTS : Please refer to a Parts Guide. OPTICAL MECHANISM PARTS : Please refer to a Parts Guide.
PG-F211X/PG-F261X PGF211X SAFETY PRECAUTION Service Manual IMPORTANT SERVICE SAFETY NOTES IMPORTANT SERVICE SAFETY NOTES (for USA) Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and servicing guidelines as follows: WARNING Use an AC voltmeter with sensitivity of 5000 ohm per volt., or higher, sensitivity to measure the AC voltage...
Page 4
PG-F211X/PG-F261X PRECAUTIONS A PRENDRE LORS DE LA REPARATION Ne peut effectuer la réparation qu' un technicien spécialisé qui s'est parfaitement accoutumé à toute vérification de sécurité et aux conseils suivants. AVERTISSEMENT Utiliser un voltmètre CA d'une sensibilité d'au moins 1. N'entreprendre aucune modification de tout circuit.
PG-F211X/PG-F261X NOTE TO SERVICE NOTE POUR LE PERSONNEL PERSONNEL D’ENTRETIEN ////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////// UV-RADIATION PRECAUTION PRECAUTION POUR LES RADIATIONS UV ////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////// La source de lumière, la lampe, dans le projecteur émet The light source, lamp, in the projector emits small de petites quantités de radiation UV.
PG-F211X/PG-F261X //////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////// UV-RADIATION PRECAUTION (Continued) PRECAUTION POUR LES RADIA TIONS UV (Suite) //////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////// Lamp Replacement Remplacement de la lampe Note: Remarque: Since the lamp reaches a very high temperature during Comme la lampe devient très chaude pendant le units operation replacement of the lamp should be fonctionnement de l’unité, son remplacement ne doit...
PG-F211X/PG-F261X WARNING: High brightness light source, do not stare into the beam of light, or view directly. Be especially careful that children do not stare directly into the beam of light. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO MOISTURE OR WET LOCATIONS.
PG-F211X/PG-F261X Precautions for using lead-free solder Employing lead-free solder • "PWBs" of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder.
Weight (approx.) 6.4 lbs. (2.9 kg) As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specifica- tion figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
1. Set as below. 1. Select the following group and subject. PG-F211X : 6 Group: CONFIRM PG-F261X : 7 Subject: MODEL Adjustment of CW index 1. Signal input: Send 256 STEP color bar. 1. The signal is input into computer 1.
Page 11
Clock, Phase, H-Pos and V-Pos settings can be automatically adjusted. DVI input operation check Send the video signal to the DVI terminal. 1. For PG-F211X/PG-F261X, check that an image is properly projected through the digital input and ana- log input. Monitor out check 1.
Page 12
PG-F211X/PG-F261X Adjusting point Adjusting conditions Adjusting procedure Model name and version check 1. Select the following group. 1. The model name appears in the MODEL field, and Group : INFO/VERSION. the firmware version in the VERSION field. Check that they are correct.
PG-F211X/PG-F261X [2] Adjustment mode process menu 1st Layer 2nd Layer Default 1st Layer 2nd Layer Default ADJUST CW/Auto KS CW-INDEX OTHER SPECIAL USB-MODE HDCP-MODE K-SENS PULSE-MODE AD/DLP R-CONT EDID EEP-SELECT G-CONT EEP-WP B-CONT EXIT R-GAIN G-GAIN B-GAIN — — —...
Page 14
PG-F211X/PG-F261X 1. Adjustment of ballast unit output power (lamp power) 1. List of parts requiring adjustment When replacing the following parts, adjust the ballast unit output power (lamp power). Part name Ref No. Part code Cement resistor R923 RR-FZA002WJZZ Ballast Control PWB ——...
PG-F211X/PG-F261X PartsGuide PARTS GUIDE No. S57K1PG-F211X MULTIMEDIA PROJECTOR PG-F211X PG-F261X MODELS Note: The reference numbers on the PWB are arranged in alphabetical order. CONTENTS PRINTED WIRING BOARD SUPPLIED ACCESSORIES ASSEMBLIES PACKING PARTS CABINET AND MECHANICAL (NOT REPLACEMENT ITEM) PARTS SERVICE JIGS AND EQUIPMENT...
Page 16
BALLAST POWER Unit Order the BALLAST POWER Ass'y (DSETUE149FMG0) when Not Available replacing ballast power unit (DUNTKE149WEF0). BALLAST CONTROL Unit DUNTKE150WEF0 PHOTO SENSOR Unit DUNTKE151WEF0 DUNTKE152WEF0 R/C RECEIVER Unit MAIN Unit (PG-F211X) DUNTKE153FMF6 MAIN Unit (PG-F261X) DUNTKE153FMF7 DMD Unit (without the DMD chip) DUNTKE154WEF0...
PG-F211X/PG-F261X [2] CABINET AND MECHANICAL PARTS 2-11 2-10 2-1-3 2-1-1 2-1-2...
Page 18
PG-F211X/PG-F261X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [2] CABINET AND MECHANICAL PARTS Top Body Ass'y (PG-F211X) CBDYTA264WEF0 Top Body Ass'y (PG-F261X) CBDYTA265WEF0 Top Body Not Available Cover GCOVAC364WJSA Decoration Plate HDECPA034WJSA Indicator HiNDPC319WJSC Cover GCOVAC242WJKC Bottom Body Ass'y (PG-F211X)
Page 20
DESCRIPTION RANK MARK DELIVERY [3] OPTICAL MECHANISM PARTS Fixing Metal LANGKB121WJFW Chassis LCHSKA024WJFW Holder LHLDZA845WJKZ For Focus Ring, x3 LX-EZA027WJFN Spring MSPRPA095WJFW Spring (PG-F261X) MSPRPA096WJFW Spring (PG-F211X) MSPRPA103WJFW Spring MSPRPA097WJFW NFANRA077WJ00 PCOVPA036WJSA Cover 4-10 PCOVPA038WJSA Cover 4-11 PCOVZA089WJFW Cover 4-12...
Page 21
PG-F211X/PG-F261X [4] SUPPLIED ACCESSORIES PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] SUPPLIED ACCESSORIES Lens Cap CCAPHA027WJSA Storage case GCASNA021WJSA AC Cord (for U.S.A) QACCDA007WJPZ RGB Cable QCNWGA045WJPZ DIN-D-sub RS-232C adaptor QCNWGA091WJPZ Remote Control RRMCGA581WJSA TGAN-A811WJZZ SECL Warranty (for Canada)
Page 22
PG-F211X/PG-F261X [5] PACKING PARTS (NOT REPLACEMENT ITEM)
Page 23
PG-F211X/PG-F261X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [5] PACKING PARTS (NOT REPLACEMENT ITEM) Packing Case (PG-F211X) SPAKCD746WJZZ Packing Case (PG-F261X) SPAKCD747WJZZ Accessory Case SPAKFB224WJZZ Wrapping Paper SPAKPA869WJZZ Packing Add SPAKXB477WJZZ Polyethylene Bag SSAKA0160CEZZ Polyethylene Bag (for Storage case)