Advertisement
Useful functions (continued)
Eco Mode :
Adjusts picture contrast according to the brightness of your room to reduce power consumption.
Off
: Deactivates the function
Eco-1
: Picture is darkened for the 1st level.
Eco-2
: Picture is darkened for the 2nd level (more than the 1st level).
Max-Eco : Only sound is available, no picture (this is to save energy in such situation as when you want to listen to the news while doing other house
works at the same time).
- After choosing Eco Mode as Max-Eco and exiting the Menu, picture will go off in 3 seconds.
- When you want the picture to appear again, press any button on the remote control then function will be reset back to "Off".
- After unplugging the TV or press "Power off" button, this function will be reset back to "Off"
Viewing Teletext
You can watch the Teletext broadcast channel with Text Functions.
1
TV mode <--> TEXT mode
2
Select a Teletext page by press number button (0-9).
•
Move up or down a page by CHANNEL +/-.
List Mode
: Book mark your favourite page.
MODE
(Red)
Press number button
for enter the number
of page.
• Recall your favourite page by press the colour button.
Hold
: Hold the current page.
• Cancel by press this button again.
Reveal
: Display hidden information.
• example : answer to a quiz, etc
Size
: Double the size of the displayed text.
Index
: Returns to page "100" or a previously designated page.
Cancel
: Leave the current page open, while you switch to watch TV.
• Useful when running a page search.
Sub-page
: Display the number of Sub-page.
• Cancel by press this button again.
Troubleshooting
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.
Severe noise or snow
Check the aerial cable and TV connections .
Check the direction of the aerial.
Check the aerial or its cable damaged or not.
Patterns, stripes or noise
Interference caused by devices such as an amplifi er, personal computer,
or a hair drier, Move it away from TV.
Ghosting (Doubling of images)
Interference occurs caused by signal refl ection from mountains or building.
Try to adjust the aerial's direction or use another antenna.
Cannot turn it on
Ensure the power cord is connected to the AC outlet correctly.
Cannot operate the remote control.
The batteries may be exhausted. Replace with new batteries.
Ensure that you are operation the remote control at less than 7 meters
from the front of your TV.
Remote control stops working
Unplug TV, several minutes later plug it in again.
Side control buttons do not work
Switch "Child Lock" to "Off".
Aspect ratio changed unintentionally
Press "
" button to return to your settings.
ZOOM
PC screen alignment is off
Adjust the "PC Position" in "PC Setting" of Set Up menu.
Blue screen appears on the screen
Switch "Blue Back" to "Off".
Strange picture when using an external device
If the top of the image is distorted, check the video signal quality itself.
If movement appears unnatural when receiving a signal from a DVD
player, etc. with 625p (progressive-scanning), change the output setting of
the external device to 625i (interlace-scanning).
(Green) (Yellow) (Blue)
for select to save
save
Watching Video or DVDs
1
Select the input source.
AV Select
0 01
1 Video-1
2 Video-2
3 HDMI
4 PC
•
Operate the connected device and play video.
2
Select "Set Up" Menu.
HDMI setting
: Setting for HDMI input.
Size
: Auto / 1 / 2
If wrong screen size appears in 480p (525p),
change to "1" or "2".
Audio
: Auto / Digital / Analogue
If no sound, change to " Analogue " or " Digital".
PC Setting
: Setting for PC input.
Auto
: Automatic adjust by 2.
PC Position
: Adjust screen position by 3 / 4.
And set by
Phase
: Sets the focus of screen.
Pixel
: Adjusts the horizontal feature of screen.
Poor picture quality
Unnatural colour >>
Adjust "Colour" and "Backlight".
Check "Colour System". If "Auto" is selected.
Select the specifi c colour system manually.
Poor sound
Adjust the "Bass" and "Treble".
If receiving a poor signal in "Stereo/I
Adjust the channel reception using "Manual".
For HDMI signal, wrong screen size.
Switch "Size" in "HDMI Setting" to "1" or "2".
For HDMI signal, green and distorted screen
Wait a little for the signal to stabilize when switching the signal format for
an "HDMI" device.
For HDMI signal, No picture / No sound
Use the cable marked with HDMI logo.
Check if the device is compliant with HDMI.
Switch "Audio" in "HDMI Setting" to "Digital" or "Auto" for HDMI devices, or
"Analogue" or "Auto" for DVI devices.
Some functions do not work.
It is not a malfunction. Some functions (dark background) in the menu do
not work depending on the situation.
Black or white dots appear on the screen.
LCD panels use fi ne dots ("pixels") to display images. While more than
99.99% of these pixels function properly, a very small number of pixels
may not light, or may light all the time. It is not a malfunction.
No picture, No sound
Some input do not output from OUTPUT terminal.
Subwoofer, No sound
May be signal source is not low frequency bass signal.
Check subwoofer cable connected correctly.
Feedback sound symptoms
Keep the microphone away from the TV's speakers.
Echo
Lower the sound level in "Microphone Volume" in order to prevent the echo.
1. Select
OK
2. Set
.
OK
II" switch to "Mono".
■
5
Advertisement
