3 7 63 1515 0 SERVICE MANUAL CD RECEIVER MA125 2005 KD-G111,KD-G117 KD-G111 KD-G111 Area suffix E ------------ Southern Europe EX ------------ Northern Europe EY ------------- Eastern Europe EU ------------------------- Turkey KD-G117 KD-G117 L 13942296513 Area suffix EE -------- Russian Federation...
Page 2
3 7 63 1515 0 SPECIFICATION AUDIO AMPLIFIER SECTION Maximum Power Output Front KD-G111 45 W per channel KD-G117 50 W per channel Rear KD-G111 45 W per channel KD-G117 50 W per channel 17 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more...
http://www.xiaoyu163.com SECTION 1 3 7 63 1515 0 PRECAUTIONS Safety Precautions Burrs formed during molding may be left over on some parts of the chassis. Therefore, pay attention to such burrs in the case of preforming repair of this system. Please use enough caution not to see the beam directly or touch it in case of an adjustment or operation check.
Page 4
http://www.xiaoyu163.com Preventing static electricity 3 7 63 1515 0 Electrostatic discharge (ESD), which occurs when static electricity stored in the body, fabric, etc. is discharged, can destroy the laser diode in the traverse unit (optical pickup). Take care to prevent this when performing repairs. 1.2.1 Grounding to prevent damage by static electricity Static electricity in the work area can destroy the optical pickup (laser diode) in devices such as CD players.
Page 5
http://www.xiaoyu163.com Important for laser products 3 7 63 1515 0 5.CAUTION : If safety switches malfunction, the laser is able 1.CLASS 1 LASER PRODUCT to function. 2.DANGER : Invisible laser radiation when open and inter 6.CAUTION : Use of controls, adjustments or performance of lock failed or defeated.
GREEN/BLACK LINE SPEAKER RL - for CAR USE PURPLE SPEAKER RR + DESTINATION CD RECEIVER PURPLE/BLACK LINE SPREAKER RR - MODEL NO. KD-G111 WHITE SPEAKER FL + WHITE/BLACK LINE SPEAKER FL - DC 12V NEGATIVE GROUND GRAY SPEAKER FR + SERIAL NO.
http://www.xiaoyu163.com SECTION 3 3 7 63 1515 0 DISASSEMBLY Main body section 3.1.1 Removing the front panel assembly (See Fig.1) (1) Push the detach button in the lower right part of the front panel assembly and remove the front panel assembly. Front panel assembly Detach button Fig.1...
Page 8
3.1.5 Removing the rear bracket (See Fig.5) • Remove the bottom cover. (1) For KD-G111, remove the three screws D, three screws E Rear bracket and two screws F attaching the rear bracket on the back side of the main body.
Page 9
http://www.xiaoyu163.com 3.1.7 Removing the CD mechanism assembly 3 7 63 1515 0 (See Fig. 7) • Remove the front panel assembly, bottom cover, side panel, rear bracket and main board. Reference: Remove the front chassis assembly as required. (1) Remove the three screws H attaching the CD mechanism assembly on the top chassis.
Page 10
http://www.xiaoyu163.com CD Mechanism Assembly 3 7 63 1515 0 3.2.1 Removing the top cover (See Figs.1 and 2) (1) Remove the two screws A on the both side of the body. (2) Lift the front side of the top cover and move the top cover backward to release the two joints a.
Page 11
http://www.xiaoyu163.com 3.2.2 Removing the connector board 3 7 63 1515 0 Wires (See Figs.3 to 5) CAUTION: Before disconnecting the flexible wire from the pickup, solder the short-circuit point on the pickup. No observance of this in- struction may cause damage of the pickup. (1) Remove the screw B fixing the connector board.
Page 12
http://www.xiaoyu163.com 3.2.3 Removing the DET switch 3 7 63 1515 0 (See Figs.6 and 7) (1) Extend the two tabs c of the feed sw. holder and pull out the switch. (2) Unsolder the DET switch wire if necessary. DET switch Connector board Pickup...
Page 13
http://www.xiaoyu163.com 3.2.4 Removing the chassis unit 3 7 63 1515 0 (See Figs.8 and 9) • Prior to performing the following procedure, remove the top Chassis unit cover and connector board. Suspension spring (L) Suspension spring (R) (1) Remove the two suspension springs (L) and (R) attaching the chassis unit to the frame.
Page 14
http://www.xiaoyu163.com 3.2.5 Removing the clamper assembly 3 7 63 1515 0 (See Figs.10 and 11) • Prior to performing the following procedure, remove the top cover. (1) Remove the clamper arm spring. Clamper arm (2) Move the clamper assembly in the direction of the arrow to spring release the two joints d.
Page 15
http://www.xiaoyu163.com 3.2.6 Removing the loading / feed motor assembly 3 7 63 1515 0 (See Figs.12 and 13) • Prior to performing the following procedure, remove the top cover, connector board and chassis unit. (1) Remove the screw C and move the loading / feed motor assembly in the direction of the arrow to remove it from the chassis rivet assembly.
Page 16
http://www.xiaoyu163.com 3.2.7 Removing the pickup unit 3 7 63 1515 0 Pickup unit (See Figs.14 to 18) • Prior to performing the following procedure, remove the top cover, connector board and chassis unit. (1) Remove the screw D and pull out the pu. shaft holder from the pu.
Page 17
http://www.xiaoyu163.com 3.2.9 Removing the trigger arm 3 7 63 1515 0 Joint k (See Figs.19 and 20) • Prior to performing the following procedure, remove the top cover, connector board and clamper unit. (1) Turn the trigger arm in the direction of the arrow to release Trigger arm the joint k and pull out upward.
Page 18
http://www.xiaoyu163.com 3.2.11 Removing the mode sw. / select lock arm 3 7 63 1515 0 Link plate Joint t (See Figs.22 and 23) Mode sw. • Prior to performing the following procedure, remove the top plate assembly. Select lock arm (1) Bring up the mode sw.
Page 19
http://www.xiaoyu163.com 3.2.12 Reassembling the mode sw. / select lock arm 3 7 63 1515 0 Select lock arm spring (See Figs.24 to 26) REFERENCE: Hook w Reverse the above removing procedure. Joint v (1) Reattach the select lock arm spring to the top plate and set Joint v the shorter end of the select lock arm spring to the hook w on the top plate.
Page 20
http://www.xiaoyu163.com 3.2.13 Removing the select arm R / link plate 3 7 63 1515 0 Joint c' Link plate Joint r (See Figs.27 and 28) Select arm R Joint b' • Prior to performing the following procedure, remove the top plate assembly.
Page 21
http://www.xiaoyu163.com 3.2.15 Removing the loading roller assembly 3 7 63 1515 0 (See Figs.31 to 33) Loading roller assembly • Prior to performing the following procedure, remove the Roller guide clamper assembly and top plate assembly. spring (1) Push inward the loading roller assembly on the gear side and detach it upward from the slot of the joint g' of the lock arm rivet assembly.
Page 22
http://www.xiaoyu163.com 3.2.16 Removing the loading gear 5, 6 and 7 3 7 63 1515 0 Loading gear bracket (See Figs.35 and 36) • Prior to performing the following procedure, remove the top Loading gear 6 cover, chassis unit, pickup unit and top plate assembly. (1) Remove the screw K attaching the loading gear bracket.
Page 23
http://www.xiaoyu163.com 3.2.17 Removing the gears 3 7 63 1515 0 Joint p' (See Figs.37 to 40) • Prior to performing the following procedure, remove the top Change plate cover, chassis unit, top plate assembly and pickup unit. rivet assembly • Pull out the loading gear 3. (See Fig.35.) (1) Pull out the feed gear.
Page 24
http://www.xiaoyu163.com 3.2.18 Removing the turn table / spindle motor 3 7 63 1515 0 Turn table (See Figs.41 and 42) • Prior to performing the following procedure, remove the top cover, connector board, chassis unit and clamper assembly. (1) Remove the two screws L attaching the spindle motor as- sembly through the slot of the turn table on top of the body.
(3) Digital tester Output Level Line out 2.0V (Vol. MAX) (4) Tracking offset meter (5) Test Disc JVC :CTS-1000 Dummy load (6) Extension cable for check Exclusive dummy load should be used for AM,and FM. For FM EXTSH002-22P × 1 dummy load,there is a loss of 6dB between SSG output and antenna input.The loss of 6dB need not be considered since...
SECTION 5 3 7 63 1515 0 TROUBLESHOOTING KD-G111 E,EX,EY,EU version model 5.1.1 Feed section Is the voltage output at Is the wiring for IC561 Is 5V present at IC541 Check CD 8V. IC561 pin 22 5V or 0V...
http://www.xiaoyu163.com 5.1.5 Signal processing section 3 7 63 1515 0 No sound from either Is the sound output from Compare the L-ch and channel. both channels (L, R)? R-ch to locate the defective point. Normal Is 9V present at IC301 pin Check the vicinity of the Q321 audio power supply.
Page 28
KD-G111 E2,EX2,EY2,EU2 and KD-G117 EE,EE2 version model 3 7 63 1515 0 5.2.1 Feed section Is the voltage output at Is the wiring for IC521 Is 5V present at IC561 Check CD 8V. IC521 pin 40, 5V or 0V...
Page 29
http://www.xiaoyu163.com 5.2.5 Signal processing section 3 7 63 1515 0 No sound from either Is the sound output from Compare the L-ch and channel. both channels (L, R)? R-ch to locate the defective point. Normal Is present at IC161 pin Check the vicinity of the IC901 audio power supply.
Page 30
http://www.xiaoyu163.com Maintenance of laser pickup 3 7 63 1515 0 Replacement of laser pickup (1) Cleaning the pick up lens Before you replace the pick up, please try to clean the lens Turn of the power switch and, disconnect the with a alcohol soaked cotton swab.
Page 31
16 PIN CORD DIAGRAM (KD-G111) 3 7 63 1515 0 Black Green Violet BL/WH Blue Gray White Yellow WH/BK GN/BK VI/BK GY/BK 2 VI 10 VI/BK 1 GY 7 RD 9 GY/BK 16 YL 4 WH MEMORY 5 BL/WH...
Page 32
http://www.xiaoyu163.com 16 PIN CORD DIAGRAM (KD-G117) 3 7 63 1515 0 Black Green VI/BK Violet GY/BK Blue Gray WH/BK BL/WH White Yellow GN/BK VI/BK GY/BK WH/BK GN/BK L 13942296513 MEMORY MEMORY BACKUP DIRECT TO BATTERY +12Volt REMOTE BL/WH ACC + 12Volt GROUND Rear Right Auto...
Page 34
http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 Victor Company of Japan, Limited AV & MULTIMEDIA COMPANY CAR ELECTRONICS CATEGORY 10-1,1chome,Ohwatari-machi,Maebashi-city,371-8543,Japan (No.MA125) Printed in Japan http://www.xiaoyu163.com...
http://www.xiaoyu163.com 3 7 63 1515 0 Safety precaution Burrs formed during molding may be left over on some parts of the chassis. Therefore, pay attention to such burrs in the case of preforming repair of this system. Please use enough caution not to see the beam directly or touch it in case of an adjustment or operation check.
Page 57
http://www.xiaoyu163.com 3 7 63 1515 0 < M E M O > L 13942296513 u163 http://www.xiaoyu163.com...
Page 58
http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 Victor Company of Japan, Limited AV & MULTIMEDIA COMPANY CAR ELECTRONICS CATEGORY 10-1,1chome,Ohwatari-machi,Maebashi-city,371-8543,Japan Printed in Japan (No.MA125SCH) http://www.xiaoyu163.com...
Area suffix EE -------- Russian Federation - Contents - 3- 2 Exploded view of general assembly and parts list (Block No.M1)(KD-G111) 3- 5 CD mechanism assembly and parts list (Block No.MB)(KD-G111,KD-G117) 3- 7 Electrical parts list (Block No.01~04)(KD-G111_EEXEYEU / E2EX2EY2EU2) 3-14 Packing materials and accessories parts list (Block No.M3)(KD-G111)
Page 60
3 7 63 1515 0 Exploded view of general assembly and parts list Block No. (KD-G111) L 13942296513 Switch board u163 http://www.xiaoyu163.com...
Page 61
http://www.xiaoyu163.com 3 7 63 1515 0 Main board L 13942296513 u163 http://www.xiaoyu163.com...
Page 62
http://www.xiaoyu163.com 3 7 63 1515 0 General Assembly Block No. [M][1][M][M] Symbol No. Part No. Part Name Description Local GE10104-001A TOP CHASSIS GE40135-001A EARTH PLATE GE30938-003A SIDE PANEL QYSDST2604ZA TAP SCREW M2.6 x 4mm(x3) GE40235-001A SCREW (x2) QYSDST2604ZA TAP SCREW M2.6 x 4mm(x3) GE40235-004A SCREW...
Page 63
http://www.xiaoyu163.com 3 7 63 1515 0 CD mechanism assembly and parts list Block No. Grease TN-2001-1011 TNG-87 GP-501MK CFD-005Z GP-305T L 13942296513 u163 The parts without symbol number are not service. http://www.xiaoyu163.com...
Page 64
http://www.xiaoyu163.com 3 7 63 1515 0 CD mechanism Block No. [M][B][M][M] Symbol No. Part No. Part Name Description Local 30320101T FRAME 30320102T TOP COVER 30320115T DANPER F 30320116T DANPER R 303205505T CHASSIS RIVET 303205503T CHANGE P. RVT A 303205301T CLAMPER ASS'Y 303205302T SPINDLE MOTOR A...
Page 65
http://www.xiaoyu163.com 3 7 63 1515 0 Electrical parts list Main board(KD-G111_EEXEYEU) Symbol No. Part No. Part Name Description Local Block No. [0][1] C308 QEKJ1EM-475Z E CAPACITOR 4.7uF 25V M Symbol No. Part No. Part Name Description Local C309 QEKJ1AM-107Z E CAPACITOR 100uF 10V M...
Page 66
http://www.xiaoyu163.com 3 7 63 1515 0 Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local C571 NCB31EK-104X C CAPACITOR 0.1uF 25V K R401 NRSA63J-223X MG RESISTOR 22kΩ 1/16W J C572 QEKJ1AM-107Z E CAPACITOR 100uF 10V M R402...
Page 67
http://www.xiaoyu163.com 3 7 63 1515 0 Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local R801 NRS181J-103X MG RESISTOR 10kΩ 1/8W J D605 SML-310VT/JK/-X R803 NRS181J-332X MG RESISTOR 3.3kΩ 1/8W J D606 SML-310VT/JK/-X R804...
Page 68
http://www.xiaoyu163.com 3 7 63 1515 0 Main board(KD-G111_E2EX2EY2EU2) Symbol No. Part No. Part Name Description Local Block No. [0][3] C164 NCB31CK-224X C CAPACITOR 0.22uF 16V K Symbol No. Part No. Part Name Description Local C165 NCB31CK-333X C CAPACITOR 0.033uF 16V K C166 NCB31HK-562X...
Page 69
http://www.xiaoyu163.com 3 7 63 1515 0 Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local C538 NCB31EK-473X C CAPACITOR 0.047uF 25V K NRSA63J-332X MG RESISTOR 3.3kΩ 1/16W J C539 QEKJ0JM-107Z E CAPACITOR 100uF 6.3V M NRS181J-150X MG RESISTOR...
Page 70
http://www.xiaoyu163.com 3 7 63 1515 0 Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local R561 NRSA63J-333X MG RESISTOR 33kΩ 1/16W J L523 QQL244J-470Z COIL 47uH J R562 NRSA63J-822X MG RESISTOR 8.2kΩ...
Page 71
http://www.xiaoyu163.com 3 7 63 1515 0 Symbol No. Part No. Part Name Description Local R643 NRSA63J-132X MG RESISTOR 1.3kΩ 1/16W J R644 NRSA63J-331X MG RESISTOR 330Ω 1/16W J R651 NRSA63J-222X MG RESISTOR 2.2kΩ 1/16W J R652 NRSA63J-222X MG RESISTOR 2.2kΩ...
Page 72
3 7 63 1515 0 Packing materials and accessories parts list Block No. No additional / supplemental order of WARRANTY CARDs are available. (KD-G111) A5 A6 A14 A15 A4 A14 A15 E,EX,EY L 13942296513 KIT: A7 A8 A9 A10 A11...
Page 73
http://www.xiaoyu163.com 3 7 63 1515 0 Packing and Accessories Block No. [M][3][M][M] Symbol No. Part No. Part Name Description Local GE20137-003A MOUNTING SLEEVE GE20135-009A TRIM PLATE GET0253-001A INST BOOK GER FRE ITA G111E,G111E2 GET0253-003A INST BOOK ENG FRE G111EU,G111EU2,G111EX,G111EX2 GET0253-006A INST BOOK ENG GER RUS...
Page 74
http://www.xiaoyu163.com 3 7 63 1515 0 Exploded view of general assembly and parts list Block No. (KD-G117) L 13942296513 Switch board u163 3-16 http://www.xiaoyu163.com...
Page 75
http://www.xiaoyu163.com 3 7 63 1515 0 Main board L 13942296513 u163 3-17 http://www.xiaoyu163.com...
Page 76
http://www.xiaoyu163.com 3 7 63 1515 0 General Assembly Block No. [M][2][M][M] Symbol No. Part No. Part Name Description Local GE10104-001A TOP CHASSIS GE40135-001A EARTH PLATE GE30938-003A SIDE PANEL QYSDST2604ZA TAP SCREW M2.6 x 4mm(x3) GE40235-001A SCREW (x2) QYSDST2604ZA TAP SCREW M2.6 x 4mm(x3) GE40235-004A SCREW...
Page 77
http://www.xiaoyu163.com 3 7 63 1515 0 Electrical parts list Main board(KD-G117_EE) Symbol No. Part No. Part Name Description Local Block No. [0][5] NCB31HK-102X C CAPACITOR 1000pF 50V K Symbol No. Part No. Part Name Description Local NCB31EK-123X C CAPACITOR 0.012uF 25V K NCB31HK-222X C CAPACITOR...
Page 78
http://www.xiaoyu163.com 3 7 63 1515 0 Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local C527 NCB31HK-103X C CAPACITOR 0.01uF 50V K C912 NCB31HK-103X C CAPACITOR 0.01uF 50V K C528 NCB31EK-333X C CAPACITOR 0.033uF 25V K C913...
Page 79
http://www.xiaoyu163.com 3 7 63 1515 0 Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local R528 NRSA63J-101X MG RESISTOR 100Ω 1/16W J R755 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W J R529 NRSA63J-0R0X MG RESISTOR 0Ω...
Page 80
http://www.xiaoyu163.com 3 7 63 1515 0 Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local R611 NRSA63J-821X MG RESISTOR 820Ω 1/16W J Q521 UN2111-X TRANSISTOR R612 NRSA63J-821X MG RESISTOR 820Ω 1/16W J Q522 UN2211-X TRANSISTOR...
Page 81
http://www.xiaoyu163.com 3 7 63 1515 0 Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local C301 QEKJ1EM-475Z E CAPACITOR 4.7uF 25V M C562 NCB31HK-103X C CAPACITOR 0.01uF 50V K C302 NCB31HK-223X C CAPACITOR 0.022uF 50V K C563...
Page 82
http://www.xiaoyu163.com 3 7 63 1515 0 Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local NRSA63J-183X MG RESISTOR 18kΩ 1/16W J R584 NRSA63J-151X MG RESISTOR 150Ω 1/16W J NRSA63J-103X MG RESISTOR 10kΩ...
Page 83
http://www.xiaoyu163.com 3 7 63 1515 0 Switch board(KD-G117_EE2) Symbol No. Part No. Part Name Description Local Block No. [0][8] S609 NSW0124-001X TACT SW Symbol No. Part No. Part Name Description Local S610 NSW0124-001X TACT SW S611 NSW0124-001X TACT SW S612 NSW0124-001X TACT SW...
Page 84
http://www.xiaoyu163.com 3 7 63 1515 0 Packing materials and accessories parts list Block No. No additional / supplemental order of WARRANTY CARDs are available. (KD-G117) A3 A4 A5 A6 L 13942296513 KIT: A7 A8 A9 A10 A11 u163 3-26 http://www.xiaoyu163.com...
Page 85
http://www.xiaoyu163.com 3 7 63 1515 0 Packing and Accessories Block No. [M][4[M][M] Symbol No. Part No. Part Name Description Local GE20137-003A MOUNTING SLEEVE GE20135-007A TRIM PLATE GET0254-001A INST BOOK ENG RUS GET0254-002A INSTALL MANUAL ------------ WARRANTY CARD BT-54023-1 VND3046-001 SERIAL TICKET VKZ4027-202 PLUG NUT...