Connecting Your Devices - JVC 0610TMH-MW-ST Instruction Manual

Connecting Your Devices

Notes:
• The following connection diagrams are examples on connecting some of the most common
devices to your TV. Please refer to your device's instruction manual on other connection
methods or for devices not shown here in this instruction book.
• When you have finished connecting your devices, turn on your TV and devices.
Connect an Antenna or Basic Cable
Cable or Antenna
Output
Notes:
• If you are able to receive an ATSC (Digital terrestrial) signal, High Definition (HD)
broadcasting can be watched.
• Not all digital broadcasting is necessarily High Definition. Check by pressing the DISPLAY
button.
• Digital broadcasting is not available in all areas.
Connect a Cable Box
Cable or
Cable Box
Antenna
Output
IN
Note:
• To view channels on your cable box, make sure your TV's channel is set to 2, 3 or 4
(depending on the area you live in).
OUT
INPUT 1 INPUT 2
75 Ω
(VHF/UHF)
TV Rear Panel
INPUT 1
75 Ω
(VHF/UHF)
TV Rear Panel
INPUT 3
INPUT 2 INPUT 3
53