Download
Share
Print this page
Electrolux Wascator FOM71 CLS Installation Manual
  1. Manuals
  2. Brands
  3. Electrolux Manuals
  4. Washer
  5. FOM 71 CLS
  6. Installation manual

Electrolux Wascator FOM71 CLS Installation Manual

Wascator fom71 cls
Hide thumbs Also See for Wascator FOM71 CLS:

Advertisement

Quick Links

Download this manual See also: Service Manual, Maintenance Manual
Installation manual
Wascator FOM71 CLS
438 9200-41/EN
07.45

Advertisement

loading

Related Manuals for Electrolux Wascator FOM71 CLS

Summary of Contents for Electrolux Wascator FOM71 CLS

  • Page 1 Installation manual Wascator FOM71 CLS 438 9200-41/EN 07.45...
  • Page 3 Contents Contents Technical data................... 1:1 Installation ....................2:1 Transportation and unpacking .............. 2:1 Siting and floor ..................3:1 Mechanical installation ................. 4:1 Water connections ................5:1 Drain connection .................. 6:1 Sample cock ..................6:1 Connection of external liquid supplies ..........7:1 Electrical installation ................
  • Page 5 Technical data Technical data Wascator FOM71 CLS Innerdrum volume litres diameter Heating electricity G-factor Weight, net Connections Wascator FOM71 CLS Water valves DN20 connection 3/4" Rec. water pressure 200-600 Functioning limits for water valve 50-1000 Capacity at 300 kPa l/min Drain valve 50/75 outer Ø mm Draining capacity l/min 438 9160-01/03...

  • Page 6: 1:2 Technical Data

    Technical data Function/subsystem Wascator FOM71 CLS Ambient conditions The machine shall be able to function during the same ambient conditions as normal washing machines. However the functional values with tolerances will only be valid if following ambient condi- tions are kept.

  • Page 7: Technical Data

    Technical data Wascator FOM71 CLS Drum speed Washing speed: Programmable (20 – 59±1) RPM Extraction: Programmable (200 – 1100±20) RPM Reversing rhythm Programmable (0 – 250±0.1) = sec. (Tolerance area refers to timer intervals) Water level Weight sensing Repeatability ±0.1kg/bath Stepsize ≤0.05kg...
  • Page 8 Technical data Wascator FOM71 CLS Soap box Number of compartments Number of programmable liquid detergents Wash programs Memory cards for IEC 60456 ISO 6330 M&S Approvals The machine shall have same approvals as normal washing machines Special equipment Manual cook for sampling of bath...
  • Page 9 Technical data Pre- programmed wash programs The Clarus Control in the Wascator FOM71 CLS contains 9 pre- programmed ”wash programs”. They are not real wash programs but are mainly designated for checking purposes. The stored programs are: Place Name Content...
  • Page 10 Technical data Electrical connection Cold water Hot water Drain Liquid detergent supply Control panel Soap box Door opening, ø 310 Wascator 720 690 1315 200 1230 1010 FOM71 CLS 5716 5715 Front Right side 5717 Rear side 438 9160-01/02...

  • Page 11: Installation

    Installation Transportation and unpacking The machine is delivered bolted onto the transport pallet and packed in a crate or box. • Remove packing from the machine. • Remove front and rear foundation panels. Remove the bolts between the machine and pallet.
  • Page 12 Installation In order to remove the safety devices: • Remove front and rear panel. Fig. • Remove both front metal angels. • Remove both rear metal angels. • The machine may not be moved with the transport securities removed. Save the transport securities for future use.
  • Page 13 Installation Siting and floor Install the machine close to a floor drain or open drain. In order to make installation and servicing the Fig. machine easier the following clearances are recommended: • At least 500 mm between the machine and the wall behind •...
  • Page 15 Installation Mechanical installation • Mark the site of the machine installation. • The round mark up (A) on the drawing are the Fig. site for the feet of the machine. • Two tilt protections shall be mounted for the two feet at the front of the machine. •...
  • Page 17 Installation Water connections All intake connections to the machine are to be fitted with manual shut-off valves and filters, to facilitate installation and servicing. In certain cases non-return valves will need to be fitted before the machine to comply with local plumbing regulations.
  • Page 18 Installation Water type Water connection cold and cold Fig. 5328 438 9160-81/02...
  • Page 19 Installation Drain connection Connect a 75 mm (2 1/2") flexible rubber hose to the machine’s drain pipe, ensuring a downward flow from the machine. Avoid sharp bends which may prevent proper draining. There shall be an air-gap of 50 mm between the drain hose and the drain.
  • Page 21 Installation Connection of external liquid supplies Electrical installation must be carried out by an authorized personnel! All optional equipment connected must be EMC-approved to EN 50081-1 or EN 50082-2. Distribution card A can be used to control Fig. external functions, output and input signals. Only in Japan Outputs (200-240V AC): Fig.
  • Page 22 Installation If more signals are required the machine can be Fig. equipped with a second distribution card B. Outputs (200-240V AC): Card B X75:1 0 V (common) X75:2 Liquid supply 5 X75:3 Liquid supply 6 X75:4 Liquid supply 7 X75:5 Liquid supply 8 X76:1 0 V (common)

  • Page 23: Electrical Installation

    Installation Electrical installation Electrical installation must be carried out by an authorized person- nel! Machines with frequency-controlled motors can be incompatible with certain types of earth leakage circuit breaker. It is important to know that the machines are designed to provide a high level of per- sonal safety, which is why items of external equipment such as earth leakage circuit breakers are not necessary.
  • Page 24 Installation Three-phase connection: Connect the earth, neutral and phase wires as Fig. shown in example ”3AC” and ”3N AC” in the figure. When the installation is completed, check: • that the drum is empty. • that the machine operates by turning on the mains switch, starting the machine and using RAPID ADVANCE to reach the spin cycle (see operations manual). 5333 3N AC 5334 438 9161-41/03...

  • Page 25: Wascator Fom71 Cls

    Installation Wascator FOM71 CLS Heating Voltage Total Fuse alternative alternative El heating 00 V 3 AC 5.8 0/30 V  AC 5.8 40 V  AC 5.8 0 V 3 AC 5.8 30/40 V 3 AC 5.8 380/400/45 V 3/3N AC 5.8 438 9161-41/03...

  • Page 27: Function Checks

    Function checks Function checks, Clarus Control Manual operation • Switch on the machine's main switch. • Check that the drum is empty and close the door. • Close the drain valve. • Open the manual valves for water. In the operating manual, chapter "Manual operation", one can find how to operate the machine manually.
  • Page 29 Assembling the ruler 10:1 Assembling the ruler • Mount the scale and ruler as swown on Fig. pictures. CLS 1.jpg CLS 2.jpg 438 9171-21/01...
  • Page 31 Calibration of level control system 11:1 Calibration of level control system The level control system can be individually and manually calibrated. The calibration starts at the level at the bottom of the inner drum. The calibration can be made up to 250 mm from the bottom of the inner drum. A ruler is supplied with the machine where the water level above the inner drum can be read.
  • Page 32 Calibration of level control system 11:2 • The ruler has two different scales, one in mm and one in RU units Fig. (exactly 2 mm/RU units). The calibration shall be made in at least five level steps, and the first step when the water just enters the inner drum.

  • Page 33: Service Program

    Calibration of level control system 11:3 SERVICE PROGRAM MAKE A CHOICE: CLEAR TRIP HOUR COUNTER CLEAR SERVICE COUNTER CLEAR WASH PROGRAM COUNTER IN CLS CLEAR WASH PROGRAM COUNTER IN SMC SCALE ADJUSTMENTS CALIB. OF LEVEL SENSOR EXIT SELECT • "Service Mode" menu is now shown on the display. Fig.

  • Page 34: Level Calibration

    Calibration of level control system 11:4 • Close the door. • Go down to "Calibration of level sensor" • Press "Select" LEVEL CALIBRATION FILL WATER TO DESIRED LEVEL LEVEL: 0 SCU OPEN • Press "Open" to fill water until the water reaches the botton of the inner drum Fig.
  • Page 35 Calibration of level control system 11:5 LEVEL CALIBRATION OLD CALIBRATION WILL BE OWERWRITTEN ARE YOU SURE? PRESS OK ELSE PRESS ANY OTHER KEY • Press "OK" Fig. • Go down to "Exit" • Press "Select" 438 9161-61/02...
  • Page 37 Calibration of the scale (weight function) 12:1 Zero adjustment of the scale (weight function) The scale itself is calibrated from factory and no adjustment should be necessary unless some scale parts need to be changed. However a zero adjustment needs to be done as the total weight of the machine needs to be programmed into the scale.
  • Page 39 Connection of thermosensor 13:1 Connection of thermosensor An external thermosensor can be connected to Fig. the machine. On the rear side of the drum is a socket for connecting the sensor. Usa a 1/4" clamping nut for the sensor. Maximun insertion of the sensor is 50 mm from the edge of the socket.
  • Page 44 Share more of our thinking at www.electrolux.com...