Motorola DCH6416 Quick Start Manual page 2

Connecting a
Standard-Definition TV*
Y
S-VIDEO
Pb
RF OUT
™
RF2 CM RF1 M-Card DEVICE ONLY
Pr
IN IN IN
CABLE OUT
RPT OUT IN SERIAL DIGITAL AUDIO VIDEO/AUDIO
Cable in
SDTV
INPUT
S-VIDEO
VIDEO
AUDIO LEFT
CABLE/
ANTENNA IN
AUDIO RIGHT
- The preferred standard-definition video connection is S-Video.
- The yellow composite video connector is the next preferred connection.
- Neither of these video connections supports high-definition TV.
- Stereo L/R (red and white) connectors are the third choice, but will only
provide two-channel stereo audio even when tuned to a Dolby Digital 5.1
surround sound program.
Alternate
*When connecting the video path, never connect the yellow composite video connector
and S-Video at the same time.
MOTOROLA and the Stylized M Logo are registered in the US Patent and Trademark Office. Macrovision is a registered trademark of the Macrovision Corporation. Dolby is a trademark of Dolby Laboratories Licensing Corporation. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
DOCSIS is a registered trademark and M-Card and OCAP are trademarks of Cable Television Laboratories, Inc. All other product or service names are the property of their respective owners. ©Motorola, Inc. 2007
540630-001-a 10/07
DCH6416/DCH6200 Quick Start Guide
Follow the cabling diagram below that best matches your home entertainment configuratio
Refer to the DCH6416 or DCH6200 User Guide at
NOTE: Allow 2 inches of clearance around the DCH6416/DCH6200 for proper ventilation.
RF OUT
RF2 CM RF1
IN IN IN
CABLE
RPT OUT IN
Standard-Definition TV and a VCR
DCH6416
V
L
SWITCHED
105-125V
ETHERNET 60Hz
4A MAX
R 500W MAX RF2 CM
HDMI
IN IN
IN
USB
eSATA IEEE 1394
Either / or
CABLE/
ANTENNA IN
To TV
HDTV and Dolby Digital surround sound are not supported in this configuration.
Two-channel stereo audio will be provided even when tuned to a Dolby
Digital 5.1 surround sound program.
** To play Dolby Digital 5.1 sound through the receiver, connect the DCH6416 or DCH6200 to the receiver using the DIGITAL AUDIO COAX or DIGITAL AUDIO OPTICAL c onnections.
Audio R and L connectors do not carry Dolby Digital 5.1. sound. Dolby Digital 5.1 is also available directly through the HDMI connection, if your A/V receiver and HDTV support HDMI.
Refer to your receiver and HDTV manuals for details.
www.motorola.com/videoproducts
and other detailed instructions.
V
Y
S-VIDEO
L
Pb
ETHERNET
™
M-Card DEVICE ONLY
R
Pr HDMI
OUT IN
DIGITAL AUDIO
SERIAL eSATA
VIDEO/AUDIO
Red text denotes future use
Note: The eSATA connector
is featured on the DCH6416 only
Connecting a
DCH6416
Y V
S-VIDEO
Pb L
SWITCHED
RF OUT
105-125V
ETHERNET 60Hz
™ 4A MAX
RF1 M-Card DEVICE ONLY R 500W MAX
Pr HDMI
IN
CABLE OUT IN
USB
RPT OUT IN SERIAL DIGITAL AUDIO VIDEO/AUDIO eSATA IEEE 1394
Cable in
Either / or
VCR SDTV
INPUT
S-VIDEO
INPUT OUTPUT
AUDIO VIDEO AUDIO VIDEO
VIDEO
AUDIO LEFT
CABLE/
R L R L ANTENNA IN
AUDIO RIGHT
Either /
or
n.
for safety instructions
SWITCHED
105-125V
60Hz
4A MAX
500W MAX
USB
IEEE 1394
Connecting an A/V Receiver,
a Standard-Definition TV, and a VCR**
S-VIDEO
RF OUT
™
RF2 CM RF1 M-Card DEVICE ONLY
IN IN IN
CABLE
RPT OUT IN SERIAL DIGITAL AUDIO
Cable in
VCR
INPUT OUTPUT
CABLE/
AUDIO VIDEO AUDIO VIDEO
ANTENNA IN
To TV
R L R L
DVD
CABLE/TV
VIDEO 2
IN
VCR
OUT
HDTV and Dolby Digital surround sound are not supported in this configuration.
Two-channel stereo audio will be provided even when tuned to a Dolby
Digital 5.1 surround sound program.
Connectors
L
AUDIO
RF IN
R
S-VIDEO VIDEO
DIGITAL AUDIO-
Y
COAX
DIGITAL AUDIO-
Pb
OPTICAL
HDMI Pr
IEEE 1394
DCH6416
Y V
Pb L
SWITCHED
105-125V
ETHERNET 60Hz
4A MAX
R 500W MAX
Pr HDMI
OUT IN
USB
VIDEO/AUDIO eSATA IEEE 1394
SDTV
INPUT
S-VIDEO
VIDEO
AUDIO LEFT
CABLE/
ANTENNA IN
AUDIO RIGHT
A/V receiver
AUDIO VIDEO DIGITAL INPUT
R L VIDEO S-VIDEO COAX
OPTICAL
TV/MONITOR SPEAKER
OUTPUT CONNECTORS
VIDEO S-VIDEO