Basic Calls & Phone Use; Making Basic Calls; Correcting Mistakes; Ending A Call - NEC Mobile Phone User Manual

Basic Calls & Phone Use

Making basic calls

You make a simple call in the same way as you would with a normal phone, except that you need to press
code and the phone number. To make international calls, you must first enter the international dialling code (see page 15).
Use the full STD area code even if you are calling to a person in the same town. If the numbers are too long to be displayed within one line, after pressing
part is deleted and '...' is added at its end.
The main-display shows the icon of strength of the radio signal that links your phone to the network. The maximum signal strength is shown by 4 shaded blocks
and the minimum signal strength by 1 block.
Starting a call
☛
Key in the phone number. Check the number on the display
☛
Before the other party answers the call, you can end the call by pressing
also end the call by pressing and holding the button on it.
When connecting a wired headset and Bluetooth headset at the same time, the wired headset will work partially (only its button will work).
When the call is sent, the screen displays the number called, the name stored in the phonebook and a connection graphic or a Calling Line Identification (CLI) picture
that has been allocated to the number called (see page 59).

Correcting mistakes

Use the and to move the cursor and then CLR to clear individual digits, or hold down CLR to completely clear a phone number.

Ending a call

☛
While talking, SK2 or briefly, or close your phone. The phone returns to the standby screen.
If is held down, your phone will turn off.
When you use the headset, you can also end a call by pressing and holding the button on it.
When connecting a wired headset and Bluetooth headset at the same time, the wired headset will work partially (only its button will work).
You cannot end a call by closing your phone when the headset is connected.
6 Basic Calls & Phone Use
➔
or SK1 to send the input number to start the call
briefly, pressing SK2 or closing your phone. When you use the headset, you can
after entering the area Subscriber Trunk Dialling (STD)
, excess