Related Manuals for LG LDP-7008D
Summary of Contents for LG LDP-7008D
-
Page 1: Important Safety Information
Important Safety Information To prevent the unexpected danger or damage, please read this information before installing and repairing the phone. There are “Caution” and “Warning”, it means as follows;... - Page 2 Important Safety Information...
- Page 3 Important Safety Information...
- Page 4 LDP-7000 Series Model LDP-7008D LDP-7004D LDP-7004N...
-
Page 5: Input/Output Devices And Button
Input/Output Devices and Button LDP-7008D LCD Display Handset Headphone Socket (Ear/Mic Mode) Speaker Speaker Button Hold/Save Button Volume Button Loop Button Message Waiting LED Dnd/Fwd Button Call Back Button Flexible Button Speed Button Trans/Pgm Button Handsfree Microphone... - Page 6 Input/Output Devices and Button LDP-7004D LCD Display (LDP-7004D only) Handset Speaker OHD Button Hold/Save Button Message Waiting LED Trans/Pgm Button Speed Button Flexible Button Volume Button...
- Page 7 Input/Output Devices and Button Item Description Handset Used for handset call. Earphone-Jack The optional earphone into the handset to provide a hands- free phone conversation. Speaker Outputs tones and voice. Speed Button Used to access speed dialing, speed programming, saved number redial.
- Page 8 Input/Output Devices and Button Item Description LCD Display Shows dialed and incoming numbers (where applicable) and on the 7008D it will display other information about call status, dialing directories and message information. Trans/PGM This button is used to initiate a Button call transfer (TRS) or to enter programming mode (PGM).
-
Page 9: Cable Connection
Cable Connection Cable connection Connect the telephone cord (curly cord) to the handset and the other end to the handset jack at the bottom of the telephone. Connect the line cable to the port at the bottom of telephone and the other end to the wall socket. -
Page 10: Basic Function
Basic Function Placing an Outside Call Lift handset, press OHD/Speaker or dial from live keypad. ● Dial 9. ● Dial the desired number. ● Placing an Intercom Call Lift handset, press OHD/Speaker or dial from active keypad. ● Dial the station number. ●... -
Page 11: Last Number Redial
Basic Function Call Wait (Camp-on) After receiving station busy tone, dial＊ . ● Camp-on tone is heard in the called station. ● When called party answers, talk or hang up to ● transfer another call to the called party. Last Number Redial Lift handset, press OHD/Speaker or dial from active keypad. - Page 12 Code for Flexible Button Programming Register of Flexible Button Trans/Pgm Press the [Trans/Pgm] button. Press the [Flexible] button. Trans/Pgm Press the [Trans/Pgm] button. Enter code number. Hold/Save Press the [Hold/Save] button.
- Page 13 Code for Flexible Button Programming Button Assignment for LDP- 4N/4D/8D Function Code Number CONF button TRANS/PGM + 91 CALLBK button TRANS/PGM + 92 DND/FWD button TRANS/PGM + 93 FLASH button TRANS/PGM + 94 MUTE button TRANS/PGM + 95 MON button TRANS/PGM + 96 REDIAL button TRANS/PGM + 97...