Initialization Of B, E, F, 7, 9 Page Data; Initializing B, E, F; Modification Of B, E, F; Camera System Adjustments - Sony Cyber-shot DSC-F707 Service Manual

1-2-2.

Initialization of B, E, F, 7, 9 Page Data

1. Initializing B, E, F, 7, 9 Page Data
Note: If the B, E, F, 7, 9 Page data has been initialized,
"Modification of B, E, F, 7, 9 Page Data" and following
adjustments need to be performed again.
1) Modification of B, E, F, 7, 9 page data
2) Video system adjustments

3) Camera system adjustments

Adjusting page B
Adjusting Address 00 to FF
Adjusting page E
Adjusting Address 00 to FF
Adjusting page F
Adjusting Address 00 to FF
Adjusting page 7
Adjusting Address 00 to FF
Adjusting page 9
Adjusting Address 00 to FF
Initializing Method:
Order Page Address Data
1 0 01 01
2 6 03 00
3 6 00 2D
4 6 01 2D
5 6 02
6
2. Modification of B, E, F, 7, 9 Page Data
If the B, E, F, 7, 9 Page data has been initialized, change the data
of the "Fixed data-2" address shown in the following tables by
manual input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the camera
may not operate.
3) When changing the data, press the PAUSE button of the
adjusting remote commander each time when setting new data
to write the data in the non-volatile memory.
4) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
Processing after Completing Modification of B, E, F, 7, 9
Page data
Order Page Address Data
1 2 00 29
2 2 01 29
Procedure
Press PAUSE button.
Check the data changes to "01".
Perform "Modification of B,
E, F, 7, 9 page Data".
Procedure
Press PAUSE button.
3. B Page Table
Note 1: Fixed data-1: Initialized data.
(Refer to "1. Initializing the B, E, F, 7, 9 Page Data")
Note 2: Fixed data-2: Modified data.
(Refer to "2. Modification of B, E, F, 7, 9 Page Data")
Address Initial value
00 to 5F
60 to D7 FF
D8 to FF FF
4. E Page Table
Note 1: Fixed data-1: Initialized data.
(Refer to "1. Initializing the B, E, F, 7, 9 Page Data")
Note 2: Fixed data-2: Modified data.
(Refer to "2. Modification of B, E, F, 7, 9 Page Data")
Address Initial value
00 to 5B
5C
5D to B6
B7
B8 to BA
BB
BC to FF
5-9
DSC-F707
Remark
Fixed data-1 (Initialized data)

CCD white defect compensation

CCD black defect compensation

Remark
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)