Connecting Hdtv - Video Only - Motorola DCT6412 User Manual

Connecting HDTV – Video Only
Connect an RF coaxial cable to the cable wall outlet and the
1
CABLE IN
Connect the HDTV using component video, HDMI.
2
Component video (Y Pb Pr)
Connect the component video cables to the Y, Pb, and Pr connectors on
your DCT6400 and the HDTV.
This connection carries video only. To connect the audio connections for
your HDTV, refer to the following page. To connect your audio
connections for a home theater receiver, refer to "Connecting Your
DCT6400 to an A/V Receiver – Audio Only."
HDMI
If your HDTV has a HDMI input, connect an HDMI cable less than 20
meters long to the
If you use the TV as the primary audio source or your home theater
receiver has an HDMI input and output, the HDMI connection carries
video and audio.
If your TV has a DVI input, you can use an HDMI-to-DVI converter cable
to connect to the DCT6400
For information on configuring your DCT6400 settings, see "Optimizing
Your DCT6400 for High Definition TV."
connector on the DCT6400.
connector on your HDTV and the DCT6400.
HDMI OUT
HDMI
DCT6400 Phase III User Guide
connector.
17