Connect The Power Cord; Install The Ink Cartridges; Choose Your Language; Important Note - Brother DCP-J752DW Quick Setup Manual

2

Connect the power cord

WARNING
The machine must be fitted with an earthed
plug.
IMPORTANT
DO NOT connect the USB cable yet (if you are
using a USB cable).
a
Connect the power cord.
NOTE
The Warning LED on the control panel will stay on
until you have installed the ink cartridges.
3

Choose your language

a
Press a or b to display your language and
press the desired language.
Press OK.
b
Press Yes or No.
2
4

Install the ink cartridges

CAUTION
If ink gets in your eyes, wash it out with water at
once and call a doctor if you are concerned.
NOTE
Make sure you install the Introductory Ink
Cartridges included with your machine first.
a
Make sure that the power is turned on.
NOTE
You can adjust the control panel angle to read the
Touchscreen more easily. Hold the edge of the
control panel to avoid accidentally pressing any of
the Touchscreen options.
b
Open the ink cartridge cover a.
c
Remove the orange protective part.
1