Cleaning The Interior Of The Product; Getting Maintenance Information; Replacing The Maintenance Box - Epson PP-100AP User Manual

Discproducer

Hide thumbs Also See for PP-100AP:

Table of Contents

Cleaning the interior of the product

To keep your printouts at their best, clean the inside by using the following procedure.

1. Make sure the product is turned off and all the lights are off, and then unplug the power

cord from the electrical outlet.

2. Open the disc cover, and remove the stackers from the product.

3. Use a soft, clean cloth to carefully remove any dust or dirt from the stackers and inside

of the product.

4. Place the stackers back in the position.

Caution:

❏ Be careful to keep water away from the electronic components.

❏ Do not spray the inside of the product with lubricants.

❏ Dirt attached to Stacker 3 or 4 should be wiped clean with a soft cloth moistened with

neutral detergent.

You can get helpful information for maintenance and support of the product, cumulative

number of published discs and free space of the maintenance box.

1. Make sure that the product is connected to the computer via the USB cable and that the

product is turned on.

2. Access the printer driver.

See "Accessing the printer driver" on page 17.

3. Click the Maintenance Info tab.

The maintenance box absorbs ink wasted during printing and head cleaning. When the

maintenance box becomes full, the product stops publishing discs.

Maintaining Your Product

Table of Contents