Miele CVA 6805 Operating And Installation Instructions page 70

Frequently asked questions
Problem
The display shows
the message "Fill
and insert milk
container"
although the milk
container is full
and in place.
"Empty drip tray"
appears in the
display even
though the drip
tray is empty.
The front door
cannot be closed.
The front door
cannot be closed.
The coffee system
suddenly stopped
preparing a
beverage.
70
Possible cause and solution
The milk container lid may be soiled, causing the sensors to
malfunction.
^ Thoroughly clean the lid and milk container (see "Cleaning
clogged milk pipework").
The drip tray is not inserted correctly.
^ Slide the drip tray all the way into the unit.
The drip tray's sensors are not working properly.
^ Touch the On/Off sensor K to turn off the coffee system.
The metal contacts are dirty.
^ Clean and dry the contacts thoroughly (see "Cleaning and
care – Drip tray").
The containers are not fully inserted.
^ Check the containers.
The door hinges are not aligned correctly.
^ Adjust the door hinges (see "Installation – Adjusting the
door hinges").
If the water tank is emptied during beverage preparation, the
display will show the message "Continue preparation? yes /
no" after the water tank has been refilled and inserted. If you
do not confirm this message with "yes" within 5 minutes, the
system will stop preparing the beverage.
The plumbed water intake is malfunctioning.
^ Check for kinks in the water intake hose and make sure
that the water shut-off valve is open all the way.
The water tank ran empty during beverage preparation, but
"Plumbed water connection - on" is selected and the coffee
system is not connected to a plumbed water supply.
^ Check the plumbed water supply settings (see "Settings –
Plumbed water connection").