NEC Univerge SV8100 Features And Specifications Manual page 795

UNIVERGE SV8100
Program
Program Name
Number
10-12-11 CD-CP00-US Network Setup –
NIC Setup
10-19-01 VoIP DSP Resource Selection
10-23-01 SIP System Interconnection
Setup – System Interconnection
10-23-02 SIP System Interconnection
Setup – IP Address
10-23-04 SIP System Interconnection
Setup – Dial Number
10-28-01 SIP System Information Setup –
Domain Name
10-28-02 SIP System Information Setup –
Host Name
10-28-03 SIP System Information Setup –
Transport Protocol
IP Trunk – (SIP) Session Initiation Protocol
Description/Comments
Define the LAN interface Speed
and Mode of the VoIP Application
supported.
IPLB daughter board does

not support half duplex
connection.
Select type of IPLA DSP
Resource. This program setting
has no affect on the terminal/trunk
port assignment or usage.
Determine if the system is
interconnected to another system.
Define the IP Address of the SIP
System Interconnection.
Define Dial Number for the SIP
System Interconnection.
Define the Domain name. This
information is generally provided
by the SIP carrier.
Define the Domain name. This
information is generally provided
by the SIP carrier.
Define the Transport type. This
option is always set to UDP.
Assigned Data
1
0 = Auto Detect
1 = 100Mbps, Full
Duplex
2 = 100Mbps, Half
Duplex
3 = 10Mbps, Full

Duplex
4 = 10Mbps, Half
Duplex
5 = 1Gbps, Full Duplex
6 = 1Gbps, Half Duplex
(default = 0)
0 = Common use for
both IP extensions and
trunks
1 = IP Extension
2 = SIP Trunk

3 = CCIS
4 = Use for NetLink
5 = Blocked
Default:
Resource 1 = 1
Resource 2~128 = 0
0 = No (Disable)

1 = Yes (Enable)
(default = 0)
0.0.0.0~
126.255.255.254
128.0.0.1~

191.255.255.254
192.0.0.1~
223.255.255.254
(default = 0.0.0.0)
Up to 12 digits (0~9)

(default not assigned)
Up to 64 Characters

(default not assigned)
Up to 48 Characters

(default not assigned)
0 = UDP

1 = TCP
(default = 0)
Issue 8.01
Level
2 3
2 - 767