Saving Repertory Dialing Numbers On A Key - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Program/Service
>
* 91=Prog. feature key?
>
+=Next layer?
US: Change key?
UK: Change feature?
Repdial key?
Saving Repertory Dialing Numbers on
a Key
You can save frequently-dialed station numbers on pro-
grammable keys that are unassigned by default.
External and internal station numbers, as well as func-
tions/procedures (comprising several operating steps)
can be stored on these keys
In addition, the keys can be programmed on two sepa-
rate levels if you have configured a key as the "switch-
ing" key (Shift key
Depending on the key assignment and programming of
your HiPath system ("Extended Key Functionality"; refer
to relevant service personnel), dual-level key assign-
ment permits several assignment combinations.
Corresponding displays guide you through this process
Page 126.
If you save internal station numbers, you can choose
whether to save an LED display for the key (=Save with
LED) or not (=Save without LED).
The LED display indicates the various states
( Page 64,
Press the key. The LED lights up.
:
Select and confirm.
or
qme
Enter the code.
Press the key. If the key is already in use, its assignment
appears on the screen.
If applicable
:
Make a selection and confirm to save the station num-
ber on the second level.
u
or
:
Confirm.
:
:
Confirm.
o
Enter the station number.
Making Calls – Basic Functions
Page 62.
Page 62).
Page 107).
27