Recording Configuration Information - Dell SuperMassive 9200 Getting Started Manual

Recording Configuration Information

Use this section to record your configuration information. Be
sure to keep for future reference.
The default MGMT interface IP address is 192.168.1.254.
Registration Information
Serial Number:
Authentication Code:
Networking Information
LAN IP Address:
_____._____._____._____
Subnet Mask:
_____._____._____._____
Record the serial number found on
the bottom panel of your
Dell SonicWALL appliance.
Record the authentication code found
on the bottom panel of your
Dell SonicWALL appliance.
Select a static IP address for your
Dell SonicWALL appliance that is
within the range of your local network.
(default is 192.168.168.168)
Record the subnet mask for the local
network. Client devices connecting
through the appliance are assigned IP
addresses in this network.
(default is 192.168.168.0)
Ethernet WAN IP Address:
_____._____._____._____
Administrator Information
Admin Name: Select an administrator account name.
(default is admin)
Admin Password: Select an administrator password.
(default is password)
Internet Service Provider (ISP) Information
Record the following information about your current Internet
service:
If you are No information is usually required. However,
connecting with some providers may require a Host Name:
DHCP
_________________________________
If you are IP Address: _____._____._____._____
connecting with
Subnet Mask:_____._____._____._____
Static IP
Default Gateway: _____._____._____._____
Primary DNS: _____._____._____._____
DNS 2 (optional): _____._____._____._____
DNS 3 (optional): _____._____._____._____
Select a static IP address for your
Ethernet WAN. This setting only
applies if you are already using an
ISP that assigns a static IP address.
Recording Configuration Information | 13