Basic
EJECT button
Card slot
Caution
●
Make sure the power of BR-DV6000 is off when inserting/
removing a CF memory card/LAN card. Inserting/removing
a card with the unit power on may damage the data storage
section of the CF memory card or the card itself.
●
Do not remove the power cable with the power of the BR-
DV6000 on. Recorded section on the CF Memory Card or
the CF Memory Card itself may be damaged as a result.
●
Do not use the wireless LAN card continuously for more
than 48 hours.
Inserting card
1.
Turn off the BR-DV6000 power.
2.
Insert a card into the SA-DV6000 card slot.
3.
Turn on the BR-DV6000 power.
LCD screen
CH1
48k
L
40
30
20
10
CH2
12
34
34
NDF
T C
FREE
H
M
S
PLAY
SP222
min
W
01/02/03
Y/C
SYNC
01:23:45 INS
VA
AM
Removing card
1.
Turn off the BR-DV6000 power.
2.
Press the EJECT button of SA-DV6000 and remove the card.
SA-DV6000
CF memory card or
LAN card
OVER
0
dB
OVER
Card status display
10
: Flashes during
F
initialization
e
e
: LAN card or built-
CF
in LAN enabled
‰
C F
: CF memory card
Inserting/removing CF memory card/LAN card
● TheSA-DV6000 accepts the following cards for which operation has
been confirmed: (As of June 2003)
Operating voltage
Current consumption
●Wired LAN-card
US:
Europe: EA2903-162 (Revision C) (Name of manufacturer: Socket
Asia:
* Revision indicated on the upper right of package production label.
●Wireless LAN-card
TEW-201PC
TEW-202CF
TEW-PC16 (firmware version 0.8.3 or later) (Name of manufacturer:
Surface
TRENDware)
WCF11 (Name of manufacturer: LINKSYS)
AIR-PCM350
●CF (Compact Flash) card
SDCFB-16 ~ SDCFB-256 (Name of manufacturer: SanDisk)
*1: Use PCMCIA card TYPE 1 or TYPE 2 adapter
*2: Use PCMCIA card TYPE 2 adapter
For the latest operational check card, visit the website
below or contact your JVC dealer.
http://www.jvc-victor.co.jp/english/pro/prodv/
● Card status according to the inserted card type is displayed on
the LCD screen. ( page 6)
● The card status is displayed when setting the LCD screen to the
Enlarged display mode.
Memo
4
3.3 V / 5 V
Max. 250 mA
EA2900-117 (Revision C) (Name of manufacturer: Socket
*1
Communications, Inc)
Communications, Inc)
*1
EA2906-194 (Revision C) (Name of manufacturer: Socket
*1
Communications, Inc)
(Name of manufacture: Cisco Systems)
FCCID: LDK102040
When turning the power on, the card status
display shown on left will flash during initial-
ization.
*2
*1