Specific Safety Rules; Intended Use; Safety Instructions; General Power Tool Safety Warnings - Black & Decker BDCMTTS-XE User Manual

Intended use

Your Black & Decker multi-purpose tool has been designed for a wide range of DIY applications.
Using the Trim saw head, this tool is intended for cutting wood and wood products.
This tool is intended for consumer use only.

Safety instructions

General power tool safety warnings

:
To reduce the risk of injury, the user must read the instruction manual.
WARNING!
General power tool safety warnings
@
WARNING! Read all safety warnings and all
@
instructions listed below may result in electric
Read all safety warnings and all instructions provide with your power unit (BDCDMT108-XE,
WARNING!
BDCDMT180-XE)
WARNING: Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
WARNING:
Read all safety warnings and all instructions provided with your
Power Unit (CMCDMT120FC or CMEDMT) before using this attachment. Failure to
follow the warnings and instructions may result in electric shock, fire and/or serious injury.

SPECIFIC SAFETy RUlES

DANGER:
a)
Keep hands away from cutting area and the blade. Keep your second hand on
auxiliary handle or motor housing. If both hands are holding the saw, they cannot be cut by the blade.
b) Do not reach underneath the workpiece. The guard cannot protect you from the blade below
the workpiece.
c) Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth of the blade
teeth should be visible below the workpiece.
d) Never hold piece being cut in your hands or across your leg. Secure the workpiece to a
stable platform. It is important to support the work properly to minimize body exposure, blade
binding, or loss of control.
e) Hold power tool by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will also
make exposed metal parts of the power tool "live" and shock the operator.
f) When ripping always use a rip fence or straight edge guide. This improves the accuracy of cut
and reduces the chance of blade binding.
g) Always use blades with correct size and shape (diamond versus round) of arbour holes. Blades
that do not match the mounting hardware of the saw will run eccentrically, causing loss of control.
h) Never use damaged or incorrect blade washers or bolt. The blade washers and bolt were
specially designed for your saw, for optimum performance and safety of operation.
instructions.
before using this accessory.
(Original instructions)
Failure to follow the warnings and
ENGLISH
3