Philips 150X3M Service Manual

15" tft lcd colour monitor

Hide thumbs Also See for 150X3M:

Electronic user's manual (74 pages)

Electronique mode d'emploi (75 pages)

Specifications (2 pages)

Table of Contents

Quick Links

Download this manual

15" TFT LCD Colour Monitor

DDC/Power saving/Auto Picture Adjustment

Description

Important Safety Notice..................................2

Technical Data & Power Management.............3~4

Connection To PC..........................................5

Installation ...................................................6

Description Of Controls..................................7

Advanced Control Of OSD..............................8

Clock & Phase Adjustments............................9

OSD Menu Control Level Structure ................10~11

OSD Attention Signal....................................12

Trouble shooting...........................................13

Failure Mode Of LCD Panel...........................14

Flat Panel Adjust ( FP Adjust ).......................15

Definition Of Pixel Defects............................16

Wiring Diagram............................................17

Mechanical Instructions ...............................18~19

Electrical Instructions ...................................20

Factory Adjustment.......................................21

Safety Test Requirements .............................22

DDC Instructions...........................................23~27

ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS

AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC

EQUIPMENT CONTAINING HIGH VOLTAGES.

CAUTION: USE A SEPARATE ISOLATION TRANSFORMER FOR THIS UNIT WHEN SERVICING.

REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES

Published by BCU Monitor

Printed in Taiwan

T A B L E OF CONT E NT S

Page

Description

DDC Data.......................................................28~29

Serial Number Modification- EEPROM ( OSD ).30~31

Repair Flow Chart...........................................32~33

Colour Adjustment..........................................34~40

Repair Tips.....................................................41

Block Diagram and control pannel(C.B.A)........42

Scaler board C.B.A.........................................43

Connector Diagram........................................44

Input DVI & D-SUB Diagram............................45

MCU Diagram................................................46

Scaler Diagram..............................................47

Inverter Diagram ( Ambit )and Recommend parts

List................................................................48

Explode View ...............................................49

Recommended Parts List.................................50

Spare Parts List.............................................. 51~52

General Product Specification .........................53~73

General Trouble Shooting Guide ......................74~89

SAFETY NOTICE

Subject to modification

150X3M/00C

(LG PANEL)

Horizontal frequencies

30 - 61 kHz

June, 30. 2002

Page

3138 106 10211

Table of Contents

Summary of Contents for Philips 150X3M

Page 1: Table Of Contents
15" TFT LCD Colour Monitor 150X3M/00C (LG PANEL) DDC/Power saving/Auto Picture Adjustment T A B L E OF CONT E NT S Horizontal frequencies 30 - 61 kHz Page Description Description Page Important Safety Notice........2 DDC Data............28~29 Technical Data & Power Management.....3~4 Serial Number Modification- EEPROM ( OSD ).30~31...
Page 2: Important Safety Notice
Under no circumstances should the original design be modified or altered without written permission from Philips. Philips assumes no liability, express or implied, arising out of any unauthorized modification of design. Servicer assumes all liability. * Broken Line...
Page 3: Technical Data
Technical Data 150X3M LCD Go to cover page Technical Specifications Pin Assignment LCD Panel Screen type : LG Panel LS 150X03-A3 Screen dimensions : 15 inches (diagnoal) The digital only connector contains 24 signal contacts organized in three rows of eight Preset display area contacts.
Page 4: Automatic Power Saving
Technical Data 150X3M LCD Go to cover page Philips Switchable adapter for Apple Video Connectors Automatic Power Saving MAC Adaptor ( For Reference Only ) If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce power consumption when power saving function active.
Page 5: Connection To Pc
Connection to PC 150X3M LCD Go to cover page Rear View 4.Pull back up the monitor body. Side View 1. Audio in 2. Mic out 3. VGA 4. DC 12V_in 5. DVI-D 1. Headphone Jack 1.Thread power cable through the hole 5.Connect to PC...
Page 6: Installation
Installation 150X3M LCD Go to cover page Installation Locations Avoid Heat and Extreme Cold 1. Do not store or use the LCD monitor in locations exposed to heat, direct sunlight, or extreme cold. 2. Avoid moving the LCD monitor between locations with large temperature differences.
Page 7: Description Of Controls
Description of Controls 150X3M LCD Go to cover page Front View Physical Function 1) Tilt 2) Height adjustment UP and DOWN buttons are used when adjusting the OSD of your monitor LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used in adjusting the OSD of your monitor.
Page 8: Advanced Control Of Osd
Advanced control of OSD 150X3M LCD Go to cover page Recover attention signals by pressing button for more than 10 Front control panel seconds without video signal input. ATTENTION ATTENTION SIGNAL ON To Lock/Unlock OSD function Access Service Mode The OSD function can be locked by pressing button for more than 10 seconds, the screen shows following windows for 3 seconds.
Page 9: Clock & Phase Adjustments
Auto adjustment hotkey Step 5 : Select VIDEO NOISE by press button. The 150X3M has build-in a auto adjustment hotkey on the front panel, Step 6 : Press for bring up it’s submenu. you may obtained a optimal video display by simply press the button and save the settings.
Page 10 OSD Control Structure for Analog 150X3M LCD Go to cover page The OSD Tree for analog video signal Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you want to later on work your way around the different adjustments.
Page 11 OSD Control Structure for Digital 150X3M LCD Go to cover page The OSD Tree for digital video signal (DVI-D or DVI-I) This OSD structure is different from analog menu, there are three functions will be disable on digital OSD menu: Contrast, Video Noise, and Adjust Color.
Page 12: Osd Attention Signal
OSD Attention signals 150X3M LCD Go to cover page WAIT FOR AUTOMATIC ADJUSTMENT The monitor will detect various display situation automatically. When This screen appears when you touch the button. It will the monitor detects the problems, the screen will show the different disappear when the monitor is properly adjusted.
Page 13: Trouble Shooting
Trouble Shooting 150X3M LCD Go to cover page TROUBLE SHOOTING Horizontal flicker Push the Auto button. appears Eliminate the horizontal bars using the Phase This page presents problems that can be corrected by the user. If the Adjustment in the First Window.
Page 14: Failure Mode Of Lcd Panel
Failure Mode of LCD panel 150X3M LCD Go to cover page Quick reference for failure mode of LCD panel This page presents problems that could be made by LCD panel. It is not necessary to repair circuit board. Simply follow the Mechanical instruction on this manual to eliminate failure by replace LCD panel or backlight tubes.
Page 15: Flat Panel Adjust (Fp Adjust)
Fpadjust program The Flat Panel Adjust (FPadjust) software helps you to find the best setting for your Philips LCD monitor. It allows you to adjust the image performance of LCD monitor, such as RESOLUTION, AUTO ADJUSTMENT, POSITION, CONTRAST, VIDEO CLOCK and VIDEO PHASE.
Page 16: Definition Of Pixel Defects
In order to qualify for repair or replacement due to pixel defects This section explains the different types of pixel defects and during the warranty period, a TFT LCD panel in a PHILIPS flat defines acceptable defect levels of each type. In order to qualify...
Page 17: Wiring Diagram
Wiring Diagram 150X3M LCD Go to cover page...
Page 18: Mechanical Instructions
Mechanical instructions 150X3M LCD Go to cover page Fig. 4 Fig. 1 To be able to perform measurements and repairs on the circuit board, spread a soft mat underneath to avoid damaging the LCD surface. Fig. 5 Fig. 2 Removal two covers as Fig. 5.
Page 19 Mechnical instructions 150X3M LCD Go to cover page Fig. 10 Fig. 7 Pull out LCD module. Bezel and control board. As Fig.10 Remove 10 screw ( two sides. ) Cover removal. As fig. 7 Fig. 8 Removal 4 screws. Removal connectors. As Fig. 8.
Page 20: Electrical Instructions
Electrical instructions 150X3M LCD Go to cover page PRESET VIDEO RESOLUTION 0. General Factory preset video resolution When carry-out the electrical settings in many cases a video signal must be applied to the monitor. A computer with : Dot rate (MHz) H.freq (KHz)
Page 21: Factory Adjustment
Factory Adjustment 150X3M LCD Go to cover page PRESET VIDEO RESOLUTION Factory Mode Adjustment (PS: The Offset R G B function can be used on reduce or eliminate snowy noise on the background when the resolution of video signal is Entering Factory Adjustment Menu 1024 X 768 vertical 60Hz.
Page 22: Safety Test Requirements
Safety Test Requirements 150X3M LCD Go to cover page All units that are returned for service or repair must pass the 3. Equipments and Connection original manufactures safety tests. Safety testing requires both Hipot and Ground Continuity testing. 3.1. Equipments...
Page 23: Ddc Instructions
DDC Instructions 150X3M LCD Go to cover page General To Printer DDC Data Re-programming In case the DDC data memory IC or main EEPROM which storage all DC 8V~12V factory settings were replaced due to a defect, the serial numbers have to be re-programmed.
Page 24 Step 2: Connecting printer cable and video cable of monitor as Fig. 4 as shown in Fig. 6. Step 3: Run the EDID301.EXE program until the main menu appears. This is for initialize alignment box. Rear view of 150X3M 3 1 2 Fig. 6 DC Power 4.
Page 25 DDC Instructions 150X3M LCD Go to cover page Note: During the loading, EDID301 will verify the EDID data which just loaded from monitor before proceed any further function, once the data structure of EDID can not be recognized, the following error message will appear on the screen, as below.
Page 26 Fig. 9. 4. Click icon (Read EDID function) to read DDC EDID data from monitor. The EDID codes will display on screen as shown in Fig. 13. Rear view of 150X3M 3 1 2 1=Power connector DC Power 3=D-SUB connector...
Page 27 DDC Instructions (Continued) 150X3M LCD Go to cover page Step 6: Write DDC data Step 6: Write DDC data Click Click (Write EDID) icon from the tool bar to write DDC data. (Write EDID) icon from the tool bar to write DDC data.
Page 28: Ddc Data
DDC data of Analog 150X3M LCD Go to cover page Detailed Timing #1 THE DISPLAY DATA CHANNEL ( DDC ) 1/2B CONTENT INCLUDING Pixel Clock (MHz) (FOR LG ANALOG) H Active (pixels) 1024 H Blanking (pixels) Vendor/Product Identification V Active (lines)
Page 29 DDC data of Digital 150X3M LCD Go to cover page Detailed Timing #1 THE DISPLAY DATA CHANNEL ( DDC ) 1/2B CONTENT INCLUDING Pixel Clock (MHz) (FOR LG DIGITAL) H Active (pixels) 1024 H Blanking (pixels) Vendor/Product Identification V Active (lines)
Page 30: Serial Number Modification- Eeprom ( Osd ).30~31
Serial number modification - EEPROM (OSD) 150X3M LCD Go to cover page - Press button1, the Red LED light should be at OFF status at this When the serial number inside DDC IC has been moment. changed, the serial number inside EEPROM (in User Bring up Fig.5.
Page 31 C:\IICRS232\RS232EXE>DDCRUN PHLW_RD /T/YxxYWWSSSSSS (press Enter) <==Press "ESC" : Go back Bring up : contents of DDCRUN as shown in Fig. 12. to DOS mode. Then, finish. Fig. 12 "PHLW_RD (fixed name)" was defined by source code of DDCRUN for Philips models already.
Page 32: Repair Flow Chart
Repair Flow Chart 150X3M LCD Go to cover page Block Diagram AC IN Power supply board (Optional) 3.3VDC 12V DC Inverter panel Main panel Control panel Audio in 620Vrms 12V DC Audio control Fluorescent Speaker LCD panel Unit Lamp No power...
Page 33 Repair Flow Chart 150X3M LCD Go to cover page Front control key Bad brightness does not work Check Check Bad Inverter Front control panel Inverter panel output panel (Key & SW) 620VAC Check Replace fluorescent Signal connectors lamp Replace main panel...
Page 34: Colour Adjustment
Colour adjustment 150X3A LCD Go to cover page LCD COLOUR ANALYZER - CA110 1. SUMMARY The LCD Colour Analyzer CA-110 was designed to upgrade the white-balanceprocess on production lines for colour LCD televisions and computer colour LCD panels in the colour LCD industry. The CA-110 consists of a main unit and a measuring probe. The measuring probe utilizes an optical system suitable for measurement of colour LCDs and is equipped with a viewfinder to verify the area to be measured.
Page 35 Colour Adjustment 150X3M LCD Go to cover page...
Page 36 Colour adjustment 150X3M LCD Go to cover page ZERO CALIBRATION Zero calibration is performed to determine the output of the measuring probe when no light reaches the sensor and to set this as the zero point to which all other measurements are referenced. Zero calibration must be performed after the POWER switch has been set ON brfore taking any measurements.
Page 37 Colour Adjustment 150X3M LCD Go to cover page SETTING MEASUREMENT AREA Measurement areas of 25mm and 50mm can be selected by extending or retracting the lens barrel. The 25mm measurement area can be used for measuring LCDs with 2 - inch or greater diagonals: the 50mm measurement area can be used for measuring LCDs with 4 - inch or greater diagonals.
Page 38 Colour adjustment 150X3M LCD Go to cover page SETTING MEASUREMENT DISTANCE The measurement distance (the distance from the front of the measuring probe's lens barrel to the display surface of the LCD ) should be set using a ruler according to the procedure below.
Page 39 6. Setting Brightness and Contrast Alignment procedure - Adjust Brightness to value100. - Adjust Contrast to value 50. 1. Turn on 150X3M LCD monitor. 2. Turn on the Timing/Pattern generator. See Fig. 1 Setting generator to provide CROSS-Hatch pattern at Resolution :...
Page 40 Colour adjustment 150X3M LCD Go to cover page 15. Gray scale checking 9300 K - Switch Timing/pattern generator to Pattern: 32 gray scale Timing: 1024 X 768 60Hz 48KHz - Setting both Brightness and Contrast to 50 (Value). - Check black and white scale are visible clearly across the screen.
Page 41: Repair Tips
Repair Tips 150X3M LCD 150P3A LCD Go to cover page preferably be equipped with a thermal control (soldering 0. Warning temperature: 225 to 250 C). All ICs and many other semi-conductors are susceptible to - The chip, once removed, must never be reused.
Page 42 150X3M LCD Go to cover page HUDSON2 Function Block DDC_D_IIC DDC_D RX0,1,2,C CLKH R.G.B. HS/VS 74LVC14 CLKV SCALER DDC_A_IIC 74HC4052 SAA6713 HMS1_0 DDC_A HMS2_E UART_SEL RX/TX R ODD/EVEN BL_CTL(0) 6713_IRQ(0) G ODD/EVEN PANEL_ID 6713_RST(0) BRIGHTNESS B ODD/EVEN P87C51MC2 DVI_CABLE(0) +5_DVI(1)
Page 44: Scaler Board C.b.a
Scaler Board C.B.A. 150X3M LCD Go to cover page G R ID B O A R D 2 3 7 7 B 2 2 3 2 3 B 3 2 5 2 6 A 2 2 3 7 8 B 1...
Page 47: Connector Diagram
3138 158 53881 F033 A4 150X3M/00C F034 A4 02-04-19 F035 B4 NAME FRANK WU / JOSS HUNG SUPERS. F036 B5 F037 B4 CHECK ******** DATE 02-02-20 KONINKLIJKE PHILIPS ELECTRONICS N.V. 2000 F038 B4 F039 B4 F040 C4 F041 C4 F042 C4...
Page 48 3138 158 53881 F111 G3 150X3M/00C F112 F3 02-04-19 F113 F3 NAME FRANK WU / JOSS HUNG SUPERS. F114 F3 F115 F3 MGr CHECK ******** DATE 02-02-20 KONINKLIJKE PHILIPS ELECTRONICS N.V. 2000 F116 H3 F117 G3 F118 G3 F119 G3 F120 F3...
Page 49 TYT12- SETNAME XH2 (WILD 2) 6401 933913910115 BAS32L CLASS_NO -------- 7403 932213999682 7404-A 933926590668 1 V/div AC 0.5 mS/div 3138 158 53881 150X3M/00C 02-04-19 NAME FRANK WU / JOSS HUNG SUPERS. CHECK ******** DATE 02-02-20 KONINKLIJKE PHILIPS ELECTRONICS N.V. 2000...
Page 50 2395 H6 NAME FRANK WU / JOSS HUNG SUPERS. 2396 H6 MGr CHECK ******** DATE 02-02-20 KONINKLIJKE PHILIPS ELECTRONICS N.V. 2000 2397 H7 2398 H7 2399 H3 3301 G2 3302 E4 3303 E4 3304 F4 1 V/div AC 1 V/div AC...
Page 51: Recommended Parts List
Recommended Parts List for inverter board Inverter Diagram 150X3M LCD Go to cover page Recommended parts list of Inverter board :(T501028.00, Ambit) ==================================================================== Pos. Service code Description supplier code ------------------------------------------------------------------------------------------------------------------------- 1075 3138 188 73471 DC-AC INVERTER (T501028.00, Ambit) 9965 000 12389 COIL A00-0501 DIP(AXIS) 21.0043.10...
Page 52: Exploded View
Exploded View 150X3M LCD Go to cover page Exploded View 150X3M/00C...
Page 53: Recommended Parts List
150X3M LCD Recommended Parts List Go to cover page Model: 150P3A/00C 31 313815132141 BEZEL 32 313815405421 POWER KNOB 33 313815405411 BUTTON-CONTROL 450 313815632541 CARTON 451 313815632551 CUSHION-R-EPS 452 313815632561 CUSHION-L-EPS 453 313815620612 P.E. BAG-ANTI-STAT. 601 313811704201 E-D.F.U. ASSY-150X3 1073 313812874931 MAINSCORD 1053 823827711541 MM Base 1075 313818873471 DC-AC INVERTER (T50I 028.)
Page 54 150X3M LCD Spare Parts List Go to cover page 2337 223886715339 CER1 0603 NP0 50V 33P PM5 R 150X3M/ 00C 3202 319802131030 RST SM 0603 10K PM5 COL 2338 223886715339 CER1 0603 NP0 50V 33P PM5 R 31 313815132141 BEZEL...
Page 55: Spare Parts List
Spare Parts List 150X3M LCD Go to cover page 5601 313818873231 TFM SMT FXD 12*5 3434 319802131030 RST SM 0603 10K PM5 COL 5609 242253600428 IND FXD TSL0808 S 10U PM10 B 3435 319802131030 RST SM 0603 10K PM5 COL...
Page 56 150X3M LCD GENERAL PRODUCT SPECIFICATION Go to cover page PHILIPS – 150X3 GENERAL PRODUCT SPECIFICATION . PROTECTIVE COVER (Option) .ANALOG AND DIGITAL DUAL INPUT . AUTO PICTURE ADJUSTMENT . 14 FACTORY PRESET MODES AND 15 USER MODES WHICH CAN BE RECOVERED TO PRESET MODES .
Page 57: General Product Specification
GENERAL PRODUCT SPECIFICATION 150X3M LCD Go to cover page CONTENTS Foreword Product profile Scanning frequencies Video dot rate Power input Power consumption Dimensions Weight Functions Ambient temperature 2.10 Safety and EMI requirements Electrical characteristics Interface signals Interface cable 3.2.1 DVI-D connectorCable 3.2.2...
Page 58 150X3M LCD GENERAL PRODUCT SPECIFICATION Go to cover page Image size 4.4.1 Actual display size Brightness uniformity White color adjustment Mechanical characteristics Controls Unit dimension / weight Tilt and swivel base Transportation packages 5.4.1 Shipping dimension / weight 5.4.2 Block unit / palletization...
Page 59 GENERAL PRODUCT SPECIFICATION 150X3M LCD Go to cover page FOREWORD This specification describes a 15 inch XGA multi-scan color TFT LCD monitor with maximum resolution up to 1024x768/75Hz non-interlaced. PRODUCT PROFILE HUDSON 15 inch TFT LCD flat panel monitor Analog and digital interface Integrated tilt, swivel and pivot base Type NR.
Page 60 Hor. Sync Positive/Negative Ver. Sync Positive/Negative 2). Intel DVI Digital Input signal: Single channel TMDS signal Interface Cable 3.2.1 DVI connector Pin-assignment: 15" TFT XGA LCD CMTR-WILD2 TYPE : 150X3M/00C 8639 000 12116 BRAND : PHILIPS 1-4-02 Y C Liu 1-4-02...
Page 61 150X3M LCD GENERAL PRODUCT SPECIFICATION Go to cover page Pin No. Description TMDS data2- TMDS data2+ TMDS data2 shield DDC clock DDC data TMDS data1- TMDS data1+ TMDS data1 shield Ground (return for +5V and H/V sync) Hot plug detect...
Page 62 VIDEO NOISE ADJUST COLOR OSD SETTINGS PRODUCT INFORMATION RESET TO FACTORY SETTINGS INPUT SELECTION EXIT MAIN CONTROLS MOVE SELECTION THEN ok 15" TFT XGA LCD CMTR-WILD2 TYPE : 150X3M/00C 8639 000 12116 BRAND : PHILIPS 1-4-02 Y C Liu 1-4-02...
Page 63 GENERAL PRODUCT SPECIFICATION 150X3M LCD Go to cover page LANGUAGE : ENGLISH, ESPANOL, FRANCAIS, DEUTSCH, ITALIANO, JAPANESE, CHINESE ADJUST POSITION: HORIZONTAL VERTICAL BRIGHTNESS & CONTRAST: Brightness and Contrast adjustment. VIDEO NOISE: Phase adjustment, Clock adjustment ADJUST COLOR: Original panel color,...
Page 64 GENERAL PRODUCT SPECIFICATION 150X3M LCD Go to cover page 2) Digital interface OSD: Adjustable functions: MAIN CONTROLS LANGUAGE BRIGHTNESS & CONTRAST ADJUST COLOR OSD SETTNGS PRODUCT INFORMATION RESET TO FACTORY SETTINGS INPUT SELECTION EXIT MAIN CONTROLS MOVE SELECTION THEN ok LANGUAGE : ENGLISH, ESPANOL, FRANCAIS, DEUTSCH, ITALIANO, JAPANESE, CHINESE BRIGHTNESS &...
Page 65 GENERAL PRODUCT SPECIFICATION 150X3M LCD Go to cover page Timing requirement 3.3.1 Mode storing capacity (1) Factory preset modes : 140 (2) User modes : 15 3.3.2 Factory preset timings MODE NO. RESOLUTION 640 x 350 720 x 400 640 x 480...
Page 66 GENERAL PRODUCT SPECIFICATION 150X3M LCD Go to cover page MODE NO. RESOLUTION 640 x 480 640 x 480 800 x 600 800 x 600 Dot clock(MHz) 31.500 31.500 36.000 40.000 37.861kHz 37.500kHz 35.156kHz 37.879kHz A ( us ) 26.413(832 dots) 26.667 (840 dots)
Page 67 GENERAL PRODUCT SPECIFICATION 150X3M LCD Go to cover page MODE NO. RESOLUTION 1024 x 768 1024 x 768 Dot clock(MHz) 75.000 78.750 56.476kHz 60.023kHz A ( us ) 17.707 (1328 dots) 16.66 (1312dots) B ( us ) 1.813 (136 dots) 1.219 ( 96 dots)
Page 68 GENERAL PRODUCT SPECIFICATION 150X3M LCD Go to cover page 3.3.3 Horizontal scanning Sync polarity : Positive or Negative Scanning frequency : 30 - 61 KHz 3.3.4 Vertical scanning Sync polarity : Positive or Negative Scanning frequency : 56 - 76 Hz...
Page 69 GENERAL PRODUCT SPECIFICATION 150X3M LCD Go to cover page Visual characteristics Test conditions Unless otherwise specified, this specification is defined under the following conditions. (1) Input signal : As defined in 3.3, 1024 x 768/75Hz mode (60.023 KHz) Signal sources must have 75 ohms output impedance.
Page 70 150X3M LCD GENERAL PRODUCT SPECIFICATION Go to cover page Brightness: 250 nits (typ.) at maximum contrast and maximum brightness (At center of the screen, Fig. 1) Image size 4.4.1 Actual display size 304.1 x 228.1mm Brightness uniformity Set contrast at 50% and turn the brightness to get above 200 nits.
Page 71 GENERAL PRODUCT SPECIFICATION 150X3M LCD Go to cover page Base cover inside: -Video signal cable -12V DC power inlet -Audio in -Microphone out Right Side:-Headphone Unit dimension / Weight Set dimension (incl. pedestal): 350W x 380H x 190D Net weight: 4.7 Kg...
Page 72 GENERAL PRODUCT SPECIFICATION 150X3M LCD Go to cover page Susceptibility of display to external environment Operating - Temperature : 5 to 40 degree C - Humidity : 20% ~ 80% - Altitude : 0-12,000 feet - Air pressure : 600-1100 mBAR...
Page 73 150X3M LCD GENERAL PRODUCT SPECIFICATION Go to cover page Display disturbances from external environment According to IEC 801-2 for ESD disturbances Display disturbances to external environment 6.4.1 EMI:FCC, IC, VCCI, CE, C-Tick, MPRII, BSMI. Reliability Mean time between failures (MTBF)
Page 74 GENERAL PRODUCT SPECIFICATION 150X3M LCD Go to cover page Fig 1: Brightness and Uniformity Average: 5 points average 15" TFT XGA LCD CMTR-WILD2 TYPE : 150X3M/00C 8639 000 12116 BRAND : PHILIPS 1-4-02 Y C Liu 1-4-02...
Page 75 GENERAL PRODUCT SPECIFICATION 150X3M LCD Go to cover page SEPARATE SYNC. VIDEO HORIZONTAL VIDEO VERTICAL COMPOSITE SYNC. VIDEO HORIZONTAL FIG-2 TIMING CHART -1 15" TFT XGA LCD CMTR-WILD2 TYPE : 150X3M/00C 8639 000 12116 BRAND : PHILIPS 1-4-02 Y C Liu...
Page 76 150X3M LCD GENERAL PRODUCT SPECIFICATION Go to cover page VIDEO VERTICAL FIG-3 TIMING CHART -2 15" TFT XGA LCD CMTR-WILD2 TYPE : 150X3M/00C 8639 000 12116 1-4-02 BRAND : PHILIPS Y C Liu 1-4-02...
Page 77: General Troubleshooting Guide
150X3M LCD Go to cover page General Troubleshooting Guide No display, but LED is ON Unstable picture/ or LED is amber ( yellow) Picture flickers Monitor drivers Out of H/ V Sync. ( inf file ) Picture too bright Screen size not correct...
Page 78 General Troubleshooting Guide (Continued) 150X3M LCD Go to cover page NO DISPLAY, but LED is ON or LED is amber(yellow) Checkpoint: 1. Click your mouse or type some word with your keyboard to wake up computer from saving status. 2. Check that your video cable is plugged in and does not have bent pins.
Page 79 General Troubleshooting Guide (Continued) 150X3M LCD Go to cover page Continued Green Amber Amber? or Green? Make sure the correct signal is input. Make sure of the state of the computer (Turn on). Press the Is the ATTENTION For example: keyboard or operate the mouse.
Page 80 Philips' monitors build in VESA DDC2B feature to support Plug & Play requirement for Windows 95/98/2000/Me . You can install the information file ( .inf) in order to select your Philips monitor from "Monitor" dialog box in Windows 95/98/2000/Me to activate Plug & Play application. The installation procedure based on...
Page 81 General Troubleshooting Guide (Continued) 150X3M LCD Go to cover page Screen Size Not Correct Adjust Horizontal/ Vertical/ Shape Via the monitor " On Screen Display " or " Front Control Knob : Auto function key". Is the Screen Size displayed correct? * Reset the monitor via OSD manipulation.
Page 82 General Troubleshooting Guide (Continued) 150X3M LCD Go to cover page Picture too Large or Small Reset monitor via OSD menu manipulation. Change monitor timing to work at the recommended resolution. Please contact your dealer/reseller for more information.
Page 83 PC OEMs. USB 2.0 : Drafted by Compaq, Hewlett Packard, Intel, Lucent, Microsoft, NEC and Philips, USB Specification version 2.0 will increase device data throughout up to 480Mbps, 40 times faster than USB 1.1 devices.
Page 84 General Troubleshooting Guide (Continued) 150X3M LCD Go to cover page Unstable Picture/ Picture Flickers Vertical/ Horizontal flicker appears Push the AUTO button. Eliminate the vertical/ horizontal bars using the Phase Adjustment in the FIRST Window. E ND Please contact your dealer/reseller for more information.
Page 85 General Troubleshooting Guide (Continued) 150X3M LCD Go to cover page Out of H/V Sync. 1. Turn off monitor. 2. Disconnect signal cable. 3. Turn on monitor. in the self test ? (warning signal..) Check video cable for bent pins, reseat to...
Page 86 General Troubleshooting Guide (Continued) 150X3M LCD Go to cover page Picture too bright Adjust Brightness and/or contrast via the Monitor "On-Screen Display" or "Front Control Knob". Is picture displayed normally? * Reset the monitor via OSD manipulation. (Select " R eset to Factory settings".) *(or =>...
Page 87 General Troubleshooting Guide (Continued) 150X3M LCD Go to cover page Note : 1. Sun light passing through a window is much brighter than monitor luminance (Luminance is the measurable quantity which most Picture too dim closely corresponds to brightness), therefore the two worst places for a monitor is directly facing the window or directly behind the window.
Page 88 General Troubleshooting Guide (Continued) 150X3M LCD Go to cover page NO POWER / LED is off Is cabinet of monitor damaged being dropped? 1. Is the correct AC power cord connected? The monitor may have 2. Is AC power outlet active? become faulty due to 3.
Page 89 General Troubleshooting Guide (Continued) 150X3M LCD Go to cover page Missing Color There are 2 easy ways to determine the Missing color problem. 1. View an image that is supposed to be "White". If one of the colors (RGB) is not functioning.
Page 90 General Troubleshooting Guide (Continued) 150X3M LCD Go to cover page OSD MAIN MENU LOCKED Press and hold the OSD menu key for about 10 seconds , until picture displays "OSD MAIN MENU UNLOCKED" Please contact your dealer/reseller for more information.
Page 91 General Troubleshooting Guide (Continued) 150X3M LCD Go to cover page Jitter/Video Noise Turn on monitor with a display or image for 30 minutes (due to drift). Jitter or Noise still present ? Try moving the monitor to another location to see if problem goes away.
Page 92 150X3M LCD General Troubleshooting Guide (Continued) Go to cover page Power management function is not active Verify the PC is compliant with VESA. In case all of the video signals of PC are not off, power management function is not active normally. [Repeat to power on and off (power management).]...

This manual is also suitable for:

150x3m/00c

Philips 150X3M Service Manual

Quick Links

Related Manuals for Philips 150X3M

Summary of Contents for Philips 150X3M

This manual is also suitable for:

Table of Contents