JVC 0199MNV*UN*SW Instructions Manual page 35

PICTURE PROCESSOR FUNCTION (Manual Adjustment)
You can perform manual picture processing on an
image. There are 7 levels for each of the following
items: TINT (CYAN/RED, YELLOW/BLUE),
CONTRAST (LOW/HIGH) and BRIGHTNESS (LOW/
HIGH).
Preparation
See page 12.
Press INPUT SELECT to select the appropriate input mode
depending on the connection to the source unit (
•If IrDA (INFRARED) or PC MODE is selected, you do not have to perform steps 1 and 2 . Refer to page
20 or 38 to send the image you want to print to the printer.
BEGIN SOURCE PLAYBACK
1
1
PRESS MEMORY WHEN THE
2
DESIRED IMAGE APPEARS
•If the image is unstable, press
MEMORY again.
2
PRESS OK
PRESS PICTURE PROCESSOR
3
UNTIL THE MANUAL SCREEN
APPEARS
•Pressing the PICTURE PROCESSOR
button changes the mode as follows:
PURE BLACK
AUTO
(clear black)
original
image
•If you want to restore the original image
during adjustment, simply press MENU.
TINT
CONTRAST LOW
BRIGHTNESS
QUIT [PICTURE PROCESSOR]
ITEM [ / ]
ADJUST [ / ]
TWILIGHT
(back-lit
compensation)
MONOTONE (black & white)
MANUAL SEPIA
MANUAL
CYAN RED
YELLOW BLUE
HIGH
LOW HIGH
OK [OK]
page 18).
PRESS CURSOR
4
THE ITEM YOU WANT TO
ADJUST
PRESS CURSOR
5
ADJUST
•If you want
to exit the
MANUAL
screen, press
PICTURE
PROCES-
SOR.
REPEAT STEPS
6
THE IMAGE APPEARS AS
DESIRED
PRESS OK
7
•The processed image appears on screen.
PRESS PRINT TO START
8
PRINTING
If you press PICTURE PROCESSOR when
no image is stored in the printer, NO
STORED IMAGE appears on screen.
Store an image in the printer first, then
press PICTURE PROCESSOR again.
TO SELECT
TO
MANUAL
TINT CYAN
YELLOW
CONTRAST LOW
BRIGHTNESS
LOW
QUIT [PICTURE PROCESSOR]
ITEM [ / ]
OK [OK]
ADJUST [ / ]
4 5
AND UNTIL
35
RED
BLUE
HIGH
HIGH