Corrective Action; Cleaning The Thermal Heads - JVC GV-PT1 Instructions Manual

34
Printer Jam
If a print sheet gets stuck inside the printer,
follow these steps to remove it:
1
OPEN LID, REMOVE INK SHEET
CARTRIDGE
Move the slide knob in the direction of
the arrow. The lid springs open, so apply
gentle pressure to the top when opening
( pg. 10).
2
REMOVE PROBLEM SHEET
If the ink sheet, or a print sheet, is caught
in the roller and can't be removed, close
the lid and shut off the printer's power.
Then turn the power back on.
3
RE-INSTALL INK SHEET
CARTRIDGE, CLOSE LID
While holding the "
ink sheet cartridge, position it at the
proper angle, insert and push in until you
hear it click (
" portion of the
pg. 10).

CORRECTIVE ACTION

Cleaning The Thermal Heads

The thermal heads may be in need of
cleaning. If the heads become covered with
dust or dirt, print quality will drop. Use a
cotton swab to clean the heads. If this doesn't
remove the dirt, please consult your nearest
JVC dealer or Technical Service Center.
1
OPEN LID
See page 10.
2
CLEAN HEADS
Clean thoroughly using a clean cotton
swab. Using anything else could result in
scratches which could cause a head
malfunction.
3
CLOSE LID
See page 10.
CAUTIONS:
The thermal heads on the underside of the
door can become hot. Be careful not to
touch them when opening or closing the
door.
It's a good idea to turn off the printer's
power and wait for a short time before
opening the door, to give the thermal heads
a chance to cool.