II. UNPACKING AND SETUP
II-1. e-STUDIO206L/256/306/356/456
Insert the power cable.
•Only for the very first time to turn the power ON with the main
power switch immediately after the setup, is the automatic set-up
mode activated including the following adjustments.
AUTO-TONER SENSOR ADJUSTMENT
SETUP FOR TONER CARTRIDGE
AUTOMATIC GAMMA ADJUSTMENT
* Never turn the power OFF with the main power switch until the
automatic gamma adjustment has been completed.
© TOSHIBA TEC CORPORATION 2012 All Rights Reserved.
AUTOMATIC SET-UP MODE
Insert the power cable.
* Be sure to install the equipment
near an electric outlet so that it is
easily accessible.
* Attach the ground wire for Japan.
Sub Menu
23